Lines Matching +full:cooling +full:- +full:levels

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  * FriendlyElec NanoPC-T4 board device tree source
11 /dts-v1/;
12 #include "rk3399-nanopi4.dtsi"
15 	model = "FriendlyElec NanoPC-T4";
16 	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
18 	vcc12v0_sys: vcc12v0-sys {
19 		compatible = "regulator-fixed";
20 		regulator-always-on;
21 		regulator-boot-on;
22 		regulator-max-microvolt = <12000000>;
23 		regulator-min-microvolt = <12000000>;
24 		regulator-name = "vcc12v0_sys";
27 	vcc5v0_host0: vcc5v0-host0 {
28 		compatible = "regulator-fixed";
29 		regulator-always-on;
30 		regulator-boot-on;
31 		regulator-name = "vcc5v0_host0";
32 		vin-supply = <&vcc5v0_sys>;
35 	adc-keys {
36 		compatible = "adc-keys";
37 		io-channels = <&saradc 1>;
38 		io-channel-names = "buttons";
39 		keyup-threshold-microvolt = <1800000>;
40 		poll-interval = <100>;
42 		button-recovery {
45 			press-threshold-microvolt = <18000>;
49 	ir-receiver {
50 		compatible = "gpio-ir-receiver";
52 		pinctrl-names = "default";
53 		pinctrl-0 = <&ir_rx>;
56 	fan: pwm-fan {
57 		compatible = "pwm-fan";
59 		 * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
62 		cooling-levels = <0 12 18 255>;
63 		#cooling-cells = <2>;
64 		fan-supply = <&vcc12v0_sys>;
84 	cooling-maps {
87 			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
92 			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
98 	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
99 	num-lanes = <4>;
100 	vpcie3v3-supply = <&vcc3v3_sys>;
105 		ir_rx: ir-rx {
113 	mmc-hs400-1_8v;
114 	mmc-hs400-enhanced-strobe;
118 	phy-supply = <&vcc5v0_host0>;
122 	phy-supply = <&vcc5v0_host0>;
126 	vin-supply = <&vcc12v0_sys>;
130 	vin-supply = <&vcc12v0_sys>;
134 	enable-active-high;
136 	vin-supply = <&vcc5v0_sys>;