Lines Matching +full:pwr +full:- +full:sel
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
10 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
38 reg_1p8v: regulator-1p8v {
39 compatible = "regulator-fixed";
40 regulator-name = "fixed-1.8V";
41 regulator-min-microvolt = <1800000>;
42 regulator-max-microvolt = <1800000>;
43 regulator-boot-on;
44 regulator-always-on;
47 reg_3p3v: regulator-3p3v {
48 compatible = "regulator-fixed";
49 regulator-name = "fixed-3.3V";
50 regulator-min-microvolt = <3300000>;
51 regulator-max-microvolt = <3300000>;
52 regulator-boot-on;
53 regulator-always-on;
56 reg_1p1v: regulator-vdd-core {
57 compatible = "regulator-fixed";
58 regulator-name = "fixed-1.1V";
59 regulator-min-microvolt = <1100000>;
60 regulator-max-microvolt = <1100000>;
61 regulator-boot-on;
62 regulator-always-on;
65 vccq_sdhi0: regulator-vccq-sdhi0 {
66 compatible = "regulator-gpio";
68 regulator-name = "SDHI0 VccQ";
69 regulator-min-microvolt = <1800000>;
70 regulator-max-microvolt = <3300000>;
72 regulator-boot-on;
74 regulator-always-on;
78 x2: x2-clock {
79 compatible = "fixed-clock";
80 #clock-cells = <0>;
81 clock-frequency = <32768>;
86 pinctrl-0 = <&adc_pins>;
87 pinctrl-names = "default";
90 /delete-node/ channel@6;
91 /delete-node/ channel@7;
95 pinctrl-0 = <ð0_pins>;
96 pinctrl-names = "default";
97 phy-handle = <&phy0>;
98 phy-mode = "rgmii-id";
101 phy0: ethernet-phy@7 {
102 compatible = "ethernet-phy-id0022.1640",
103 "ethernet-phy-ieee802.3-c22";
105 interrupt-parent = <&irqc>;
107 rxc-skew-psec = <2400>;
108 txc-skew-psec = <2400>;
109 rxdv-skew-psec = <0>;
110 txen-skew-psec = <0>;
111 rxd0-skew-psec = <0>;
112 rxd1-skew-psec = <0>;
113 rxd2-skew-psec = <0>;
114 rxd3-skew-psec = <0>;
115 txd0-skew-psec = <0>;
116 txd1-skew-psec = <0>;
117 txd2-skew-psec = <0>;
118 txd3-skew-psec = <0>;
123 pinctrl-0 = <ð1_pins>;
124 pinctrl-names = "default";
125 phy-handle = <&phy1>;
126 phy-mode = "rgmii-id";
129 phy1: ethernet-phy@7 {
130 compatible = "ethernet-phy-id0022.1640",
131 "ethernet-phy-ieee802.3-c22";
133 interrupt-parent = <&irqc>;
135 rxc-skew-psec = <2400>;
136 txc-skew-psec = <2400>;
137 rxdv-skew-psec = <0>;
138 txen-skew-psec = <0>;
139 rxd0-skew-psec = <0>;
140 rxd1-skew-psec = <0>;
141 rxd2-skew-psec = <0>;
142 rxd3-skew-psec = <0>;
143 txd0-skew-psec = <0>;
144 txd1-skew-psec = <0>;
145 txd2-skew-psec = <0>;
146 txd3-skew-psec = <0>;
151 clock-frequency = <24000000>;
155 mali-supply = <®_1p1v>;
162 reg-names = "main", "rtc";
165 clock-names = "xin";
220 gpio-sd0-pwr-en-hog {
221 gpio-hog;
223 output-high;
224 line-name = "gpio_sd0_pwr_en";
228 qspi0-data {
230 power-source = <1800>;
233 qspi0-ctrl {
235 power-source = <1800>;
246 sd0-dev-sel-hog {
247 gpio-hog;
249 output-high;
250 line-name = "sd0_dev_sel";
257 power-source = <1800>;
262 power-source = <1800>;
267 power-source = <1800>;
274 power-source = <3300>;
279 power-source = <3300>;
290 power-source = <1800>;
295 power-source = <1800>;
305 pinctrl-0 = <&qspi0_pins>;
306 pinctrl-names = "default";
310 compatible = "micron,mt25qu512a", "jedec,spi-nor";
312 m25p,fast-read;
313 spi-max-frequency = <50000000>;
314 spi-rx-bus-width = <4>;
315 spi-tx-bus-width = <4>;
318 compatible = "fixed-partitions";
319 #address-cells = <1>;
320 #size-cells = <1>;
324 read-only;
335 pinctrl-0 = <&sdhi0_pins>;
336 pinctrl-1 = <&sdhi0_pins_uhs>;
337 pinctrl-names = "default", "state_uhs";
339 vmmc-supply = <®_3p3v>;
340 vqmmc-supply = <&vccq_sdhi0>;
341 bus-width = <4>;
342 sd-uhs-sdr50;
343 sd-uhs-sdr104;
350 pinctrl-0 = <&sdhi0_emmc_pins>;
351 pinctrl-1 = <&sdhi0_emmc_pins>;
352 pinctrl-names = "default", "state_uhs";
354 vmmc-supply = <®_3p3v>;
355 vqmmc-supply = <®_1p8v>;
356 bus-width = <8>;
357 mmc-hs200-1_8v;
358 non-removable;
359 fixed-emmc-driver-type = <1>;
366 timeout-sec = <60>;
371 timeout-sec = <60>;