Lines Matching +full:lvds +full:- +full:decoder
1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2016-2018 Renesas Electronics Corp.
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
21 audio_clkout: audio-clkout {
24 * but needed to avoid cs2000/rcar_sound probe dead-lock
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
28 clock-frequency = <12288000>;
32 compatible = "pwm-backlight";
35 brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
36 default-brightness-level = <10>;
38 power-supply = <®_12p0v>;
39 enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
44 stdout-path = "serial0:115200n8";
47 composite-in {
48 compatible = "composite-video-connector";
52 remote-endpoint = <&adv7180_in>;
57 hdmi-in {
58 compatible = "hdmi-connector";
63 remote-endpoint = <&adv7612_in>;
68 hdmi-out {
69 compatible = "hdmi-connector";
74 remote-endpoint = <&adv7511_out>;
80 compatible = "gpio-keys";
82 pinctrl-0 = <&keys_pins>;
83 pinctrl-names = "default";
85 key-1 {
88 label = "SW56-1";
89 wakeup-source;
90 debounce-interval = <20>;
92 key-2 {
95 label = "SW56-2";
96 wakeup-source;
97 debounce-interval = <20>;
99 key-3 {
102 label = "SW56-3";
103 wakeup-source;
104 debounce-interval = <20>;
106 key-4 {
109 label = "SW56-4";
110 wakeup-source;
111 debounce-interval = <20>;
115 lvds-decoder {
117 vcc-supply = <®_3p3v>;
120 #address-cells = <1>;
121 #size-cells = <0>;
126 remote-endpoint = <&lvds0_out>;
133 remote-endpoint = <&adv7511_in>;
145 reg_1p8v: regulator-1p8v {
146 compatible = "regulator-fixed";
147 regulator-name = "fixed-1.8V";
148 regulator-min-microvolt = <1800000>;
149 regulator-max-microvolt = <1800000>;
150 regulator-boot-on;
151 regulator-always-on;
154 reg_3p3v: regulator-3p3v {
155 compatible = "regulator-fixed";
156 regulator-name = "fixed-3.3V";
157 regulator-min-microvolt = <3300000>;
158 regulator-max-microvolt = <3300000>;
159 regulator-boot-on;
160 regulator-always-on;
163 reg_12p0v: regulator-12p0v {
164 compatible = "regulator-fixed";
165 regulator-name = "D12.0V";
166 regulator-min-microvolt = <12000000>;
167 regulator-max-microvolt = <12000000>;
168 regulator-boot-on;
169 regulator-always-on;
173 compatible = "audio-graph-card";
181 compatible = "vga-connector";
185 remote-endpoint = <&adv7123_out>;
190 vga-encoder {
194 #address-cells = <1>;
195 #size-cells = <0>;
200 remote-endpoint = <&du_out_rgb>;
206 remote-endpoint = <&vga_in>;
213 compatible = "fixed-clock";
214 #clock-cells = <0>;
215 clock-frequency = <74250000>;
219 compatible = "fixed-clock";
220 #clock-cells = <0>;
221 clock-frequency = <24576000>;
228 * and R-Car Sound uses AUDIO_CLKB.
232 * SW60 should be 1-2.
235 clock-frequency = <22579200>;
239 pinctrl-0 = <&avb0_pins>;
240 pinctrl-names = "default";
241 renesas,no-ether-link;
242 phy-handle = <&phy0>;
245 phy0: ethernet-phy@0 {
246 compatible = "ethernet-phy-id0022.1622",
247 "ethernet-phy-ieee802.3-c22";
248 rxc-skew-ps = <1500>;
250 interrupt-parent = <&gpio5>;
252 reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
257 * isn't supported on R-Car D3(e). Thus, limit speed to
260 max-speed = <100>;
265 pinctrl-0 = <&can0_pins>;
266 pinctrl-names = "default";
271 pinctrl-0 = <&can1_pins>;
272 pinctrl-names = "default";
277 pinctrl-0 = <&du_pins>;
278 pinctrl-names = "default";
284 clock-names = "du.0", "du.1", "dclkin.0";
289 remote-endpoint = <&adv7123_in>;
301 clock-frequency = <48000000>;
310 pinctrl-0 = <&i2c0_pins>;
311 pinctrl-names = "default";
315 compatible = "asahi-kasei,ak4613";
316 #sound-dai-cells = <0>;
320 asahi-kasei,in1-single-end;
321 asahi-kasei,in2-single-end;
322 asahi-kasei,out1-single-end;
323 asahi-kasei,out2-single-end;
324 asahi-kasei,out3-single-end;
325 asahi-kasei,out4-single-end;
326 asahi-kasei,out5-single-end;
327 asahi-kasei,out6-single-end;
331 remote-endpoint = <&rsnd_for_ak4613>;
336 composite-in@20 {
341 #address-cells = <1>;
342 #size-cells = <0>;
347 remote-endpoint = <&composite_con_in>;
356 * CVBS and HDMI inputs through SW[49-53]
367 hdmi-encoder@39 {
370 reg-names = "main", "edid", "cec", "packet";
371 interrupt-parent = <&gpio1>;
374 avdd-supply = <®_1p8v>;
375 dvdd-supply = <®_1p8v>;
376 pvdd-supply = <®_1p8v>;
377 dvdd-3v-supply = <®_3p3v>;
378 bgvdd-supply = <®_1p8v>;
380 adi,input-depth = <8>;
381 adi,input-colorspace = "rgb";
382 adi,input-clock = "1x";
385 #address-cells = <1>;
386 #size-cells = <0>;
391 remote-endpoint = <&thc63lvd1024_out>;
398 remote-endpoint = <&hdmi_con_out>;
404 hdmi-decoder@4c {
407 default-input = <0>;
410 #address-cells = <1>;
411 #size-cells = <0>;
417 remote-endpoint = <&hdmi_con_in>;
426 * CVBS and HDMI inputs through SW[49-53]
433 remote-endpoint = <&vin4_in>;
439 cs2000: clk-multiplier@4f {
440 #clock-cells = <0>;
441 compatible = "cirrus,cs2000-cp";
444 clock-names = "clk_in", "ref_clk";
446 assigned-clocks = <&cs2000>;
447 assigned-clock-rates = <24576000>; /* 1/1 divide */
458 pinctrl-0 = <&i2c1_pins>;
459 pinctrl-names = "default";
469 clock-names = "fck", "dclkin.0", "extal";
474 remote-endpoint = <&thc63lvd1024_in>;
491 clock-names = "fck", "dclkin.0", "extal";
532 bias-pull-up;
559 power-source = <1800>;
565 power-source = <1800>;
573 sound_clk_pins: sound-clk {
591 pinctrl-0 = <&pwm0_pins>;
592 pinctrl-names = "default";
598 pinctrl-0 = <&pwm1_pins>;
599 pinctrl-names = "default";
605 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
606 pinctrl-names = "default";
609 #sound-dai-cells = <0>;
612 #clock-cells = <1>;
613 clock-frequency = <12288000 11289600>;
629 remote-endpoint = <&ak4613_endpoint>;
630 dai-format = "left_j";
631 bitclock-master = <&rsnd_for_ak4613>;
632 frame-master = <&rsnd_for_ak4613>;
641 pinctrl-0 = <&rpc_pins>;
642 pinctrl-names = "default";
647 compatible = "cypress,hyperflash", "cfi-flash";
651 compatible = "fixed-partitions";
652 #address-cells = <1>;
653 #size-cells = <1>;
657 read-only;
661 read-only;
665 read-only;
669 read-only;
673 read-only;
677 read-only;
693 timeout-sec = <60>;
698 pinctrl-0 = <&scif2_pins>;
699 pinctrl-names = "default";
705 /* used for on-board eMMC */
706 pinctrl-0 = <&sdhi2_pins>;
707 pinctrl-1 = <&sdhi2_pins_uhs>;
708 pinctrl-names = "default", "state_uhs";
710 vmmc-supply = <®_3p3v>;
711 vqmmc-supply = <®_1p8v>;
712 bus-width = <8>;
713 mmc-hs200-1_8v;
714 no-sd;
715 no-sdio;
716 non-removable;
721 shared-pin;
725 pinctrl-0 = <&usb0_pins>;
726 pinctrl-names = "default";
728 renesas,no-otg-pins;
733 pinctrl-0 = <&vin4_pins>;
734 pinctrl-names = "default";
741 pclk-sample = <0>;
742 hsync-active = <0>;
743 vsync-active = <0>;
744 remote-endpoint = <&adv7612_out>;