Lines Matching +full:vdd +full:- +full:1
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
23 compatible = "qcom,sm8550-qrd", "qcom,sm8550";
24 chassis-type = "handset";
31 wcd938x: audio-codec {
32 compatible = "qcom,wcd9385-codec";
34 pinctrl-names = "default";
35 pinctrl-0 = <&wcd_default>;
37 qcom,micbias1-microvolt = <1800000>;
38 qcom,micbias2-microvolt = <1800000>;
39 qcom,micbias3-microvolt = <1800000>;
40 qcom,micbias4-microvolt = <1800000>;
41 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
42 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
43 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
44 qcom,rx-device = <&wcd_rx>;
45 qcom,tx-device = <&wcd_tx>;
47 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
49 vdd-buck-supply = <&vreg_l15b_1p8>;
50 vdd-rxtx-supply = <&vreg_l15b_1p8>;
51 vdd-io-supply = <&vreg_l15b_1p8>;
52 vdd-mic-bias-supply = <&vreg_bob1>;
54 #sound-dai-cells = <1>;
58 stdout-path = "serial0:115200n8";
61 gpio-keys {
62 compatible = "gpio-keys";
64 pinctrl-0 = <&volume_up_n>;
65 pinctrl-names = "default";
67 key-volume-up {
71 debounce-interval = <15>;
72 linux,can-disable;
73 wakeup-source;
77 pmic-glink {
78 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
79 #address-cells = <1>;
80 #size-cells = <0>;
81 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
84 compatible = "usb-c-connector";
86 power-role = "dual";
87 data-role = "dual";
90 #address-cells = <1>;
91 #size-cells = <0>;
97 remote-endpoint = <&usb_1_dwc3_hs>;
101 port@1 {
102 reg = <1>;
105 remote-endpoint = <&redriver_ss_out>;
113 remote-endpoint = <&fsa4480_sbu_mux>;
121 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
122 model = "SM8550-QRD";
123 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
136 wcd-playback-dai-link {
137 link-name = "WCD Playback";
140 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
144 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
148 sound-dai = <&q6apm>;
152 wcd-capture-dai-link {
153 link-name = "WCD Capture";
156 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
160 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
164 sound-dai = <&q6apm>;
168 wsa-dai-link {
169 link-name = "WSA Playback";
172 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
176 sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
180 sound-dai = <&q6apm>;
184 va-dai-link {
185 link-name = "VA Capture";
188 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
192 sound-dai = <&lpass_vamacro 0>;
196 sound-dai = <&q6apm>;
201 vph_pwr: vph-pwr-regulator {
202 compatible = "regulator-fixed";
203 regulator-name = "vph_pwr";
204 regulator-min-microvolt = <3700000>;
205 regulator-max-microvolt = <3700000>;
207 regulator-always-on;
208 regulator-boot-on;
213 regulators-0 {
214 compatible = "qcom,pm8550-rpmh-regulators";
215 qcom,pmic-id = "b";
217 vdd-bob1-supply = <&vph_pwr>;
218 vdd-bob2-supply = <&vph_pwr>;
219 vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
220 vdd-l2-l13-l14-supply = <&vreg_bob1>;
221 vdd-l3-supply = <&vreg_s4g_1p25>;
222 vdd-l5-l16-supply = <&vreg_bob1>;
223 vdd-l6-l7-supply = <&vreg_bob1>;
224 vdd-l8-l9-supply = <&vreg_bob1>;
225 vdd-l11-supply = <&vreg_s4g_1p25>;
226 vdd-l12-supply = <&vreg_s6g_1p86>;
227 vdd-l15-supply = <&vreg_s6g_1p86>;
228 vdd-l17-supply = <&vreg_bob2>;
231 regulator-name = "vreg_bob1";
232 regulator-min-microvolt = <3296000>;
233 regulator-max-microvolt = <3960000>;
234 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 regulator-name = "vreg_bob2";
239 regulator-min-microvolt = <2720000>;
240 regulator-max-microvolt = <3960000>;
241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 regulator-name = "vreg_l1b_1p8";
246 regulator-min-microvolt = <1800000>;
247 regulator-max-microvolt = <1800000>;
248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
252 regulator-name = "vreg_l2b_3p0";
253 regulator-min-microvolt = <3008000>;
254 regulator-max-microvolt = <3008000>;
255 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 regulator-name = "vreg_l5b_3p1";
260 regulator-min-microvolt = <3104000>;
261 regulator-max-microvolt = <3104000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
266 regulator-name = "vreg_l6b_1p8";
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <3008000>;
269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 regulator-name = "vreg_l7b_1p8";
274 regulator-min-microvolt = <1800000>;
275 regulator-max-microvolt = <3008000>;
276 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 regulator-name = "vreg_l8b_1p8";
281 regulator-min-microvolt = <1800000>;
282 regulator-max-microvolt = <3008000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 regulator-name = "vreg_l9b_2p9";
288 regulator-min-microvolt = <2960000>;
289 regulator-max-microvolt = <3008000>;
290 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
294 regulator-name = "vreg_l11b_1p2";
295 regulator-min-microvolt = <1200000>;
296 regulator-max-microvolt = <1504000>;
297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 regulator-name = "vreg_l12b_1p8";
302 regulator-min-microvolt = <1800000>;
303 regulator-max-microvolt = <1800000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 regulator-name = "vreg_l13b_3p0";
309 regulator-min-microvolt = <3000000>;
310 regulator-max-microvolt = <3000000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 regulator-name = "vreg_l14b_3p2";
316 regulator-min-microvolt = <3200000>;
317 regulator-max-microvolt = <3200000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 regulator-name = "vreg_l15b_1p8";
323 regulator-min-microvolt = <1800000>;
324 regulator-max-microvolt = <1800000>;
325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 regulator-name = "vreg_l16b_2p8";
330 regulator-min-microvolt = <2800000>;
331 regulator-max-microvolt = <2800000>;
332 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 regulator-name = "vreg_l17b_2p5";
337 regulator-min-microvolt = <2504000>;
338 regulator-max-microvolt = <2504000>;
339 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
343 regulators-1 {
344 compatible = "qcom,pm8550vs-rpmh-regulators";
345 qcom,pmic-id = "c";
347 vdd-l1-supply = <&vreg_s4g_1p25>;
348 vdd-l2-supply = <&vreg_s4e_0p95>;
349 vdd-l3-supply = <&vreg_s4e_0p95>;
352 regulator-name = "vreg_l3c_0p9";
353 regulator-min-microvolt = <880000>;
354 regulator-max-microvolt = <912000>;
355 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
359 regulators-2 {
360 compatible = "qcom,pm8550vs-rpmh-regulators";
361 qcom,pmic-id = "d";
363 vdd-l1-supply = <&vreg_s4e_0p95>;
364 vdd-l2-supply = <&vreg_s4e_0p95>;
365 vdd-l3-supply = <&vreg_s4e_0p95>;
368 regulator-name = "vreg_l1d_0p88";
369 regulator-min-microvolt = <880000>;
370 regulator-max-microvolt = <920000>;
371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
377 regulators-3 {
378 compatible = "qcom,pm8550vs-rpmh-regulators";
379 qcom,pmic-id = "e";
381 vdd-l1-supply = <&vreg_s4e_0p95>;
382 vdd-l2-supply = <&vreg_s4e_0p95>;
383 vdd-l3-supply = <&vreg_s4g_1p25>;
384 vdd-s4-supply = <&vph_pwr>;
385 vdd-s5-supply = <&vph_pwr>;
388 regulator-name = "vreg_s4e_0p95";
389 regulator-min-microvolt = <904000>;
390 regulator-max-microvolt = <984000>;
391 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
395 regulator-name = "vreg_s5e_1p08";
396 regulator-min-microvolt = <1080000>;
397 regulator-max-microvolt = <1120000>;
398 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
402 regulator-name = "vreg_l1e_0p88";
403 regulator-min-microvolt = <880000>;
404 regulator-max-microvolt = <880000>;
405 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
409 regulator-name = "vreg_l2e_0p9";
410 regulator-min-microvolt = <904000>;
411 regulator-max-microvolt = <970000>;
412 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
416 regulator-name = "vreg_l3e_1p2";
417 regulator-min-microvolt = <1200000>;
418 regulator-max-microvolt = <1200000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
423 regulators-4 {
424 compatible = "qcom,pm8550ve-rpmh-regulators";
425 qcom,pmic-id = "f";
427 vdd-l1-supply = <&vreg_s4e_0p95>;
428 vdd-l2-supply = <&vreg_s4e_0p95>;
429 vdd-l3-supply = <&vreg_s4e_0p95>;
430 vdd-s4-supply = <&vph_pwr>;
433 regulator-name = "vreg_s4f_0p5";
434 regulator-min-microvolt = <500000>;
435 regulator-max-microvolt = <700000>;
436 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
440 regulator-name = "vreg_l1f_0p9";
441 regulator-min-microvolt = <912000>;
442 regulator-max-microvolt = <912000>;
443 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
447 regulator-name = "vreg_l2f_0p88";
448 regulator-min-microvolt = <880000>;
449 regulator-max-microvolt = <912000>;
450 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
454 regulator-name = "vreg_l3f_0p88";
455 regulator-min-microvolt = <880000>;
456 regulator-max-microvolt = <912000>;
457 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
461 regulators-5 {
462 compatible = "qcom,pm8550vs-rpmh-regulators";
463 qcom,pmic-id = "g";
465 vdd-l1-supply = <&vreg_s4g_1p25>;
466 vdd-l2-supply = <&vreg_s4g_1p25>;
467 vdd-l3-supply = <&vreg_s4g_1p25>;
468 vdd-s1-supply = <&vph_pwr>;
469 vdd-s2-supply = <&vph_pwr>;
470 vdd-s3-supply = <&vph_pwr>;
471 vdd-s4-supply = <&vph_pwr>;
472 vdd-s5-supply = <&vph_pwr>;
473 vdd-s6-supply = <&vph_pwr>;
476 regulator-name = "vreg_s1g_1p25";
477 regulator-min-microvolt = <1200000>;
478 regulator-max-microvolt = <1300000>;
479 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
483 regulator-name = "vreg_s2g_0p85";
484 regulator-min-microvolt = <800000>;
485 regulator-max-microvolt = <1000000>;
486 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
490 regulator-name = "vreg_s3g_0p8";
491 regulator-min-microvolt = <300000>;
492 regulator-max-microvolt = <1004000>;
493 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
497 regulator-name = "vreg_s4g_1p25";
498 regulator-min-microvolt = <1200000>;
499 regulator-max-microvolt = <1352000>;
500 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
504 regulator-name = "vreg_s5g_0p85";
505 regulator-min-microvolt = <500000>;
506 regulator-max-microvolt = <1004000>;
507 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
511 regulator-name = "vreg_s6g_1p86";
512 regulator-min-microvolt = <1800000>;
513 regulator-max-microvolt = <2000000>;
514 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
518 regulator-name = "vreg_l1g_1p2";
519 regulator-min-microvolt = <1200000>;
520 regulator-max-microvolt = <1200000>;
521 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
525 regulator-name = "vreg_l3g_1p2";
526 regulator-min-microvolt = <1200000>;
527 regulator-max-microvolt = <1200000>;
528 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
532 regulators-6 {
533 compatible = "qcom,pm8010-rpmh-regulators";
534 qcom,pmic-id = "m";
536 vdd-l1-l2-supply = <&vreg_s4g_1p25>;
537 vdd-l3-l4-supply = <&vreg_bob2>;
538 vdd-l5-supply = <&vreg_s6g_1p86>;
539 vdd-l6-supply = <&vreg_s6g_1p86>;
540 vdd-l7-supply = <&vreg_bob1>;
543 regulator-name = "vreg_l1m_1p056";
544 regulator-min-microvolt = <1056000>;
545 regulator-max-microvolt = <1056000>;
546 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
550 regulator-name = "vreg_l2m_1p056";
551 regulator-min-microvolt = <1056000>;
552 regulator-max-microvolt = <1056000>;
553 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
557 regulator-name = "vreg_l3m_2p8";
558 regulator-min-microvolt = <2800000>;
559 regulator-max-microvolt = <2800000>;
560 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
564 regulator-name = "vreg_l4m_2p8";
565 regulator-min-microvolt = <2800000>;
566 regulator-max-microvolt = <2800000>;
567 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
571 regulator-name = "vreg_l5m_1p8";
572 regulator-min-microvolt = <1800000>;
573 regulator-max-microvolt = <1800000>;
574 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
578 regulator-name = "vreg_l6m_1p8";
579 regulator-min-microvolt = <1800000>;
580 regulator-max-microvolt = <1800000>;
581 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
585 regulator-name = "vreg_l7m_2p9";
586 regulator-min-microvolt = <2800000>;
587 regulator-max-microvolt = <2904000>;
588 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
592 regulators-7 {
593 compatible = "qcom,pm8010-rpmh-regulators";
594 qcom,pmic-id = "n";
596 vdd-l1-l2-supply = <&vreg_s4g_1p25>;
597 vdd-l3-l4-supply = <&vreg_bob2>;
598 vdd-l5-supply = <&vreg_s6g_1p86>;
599 vdd-l6-supply = <&vreg_bob1>;
600 vdd-l7-supply = <&vreg_bob1>;
603 regulator-name = "vreg_l1n_1p1";
604 regulator-min-microvolt = <1104000>;
605 regulator-max-microvolt = <1200000>;
606 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
610 regulator-name = "vreg_l2n_1p1";
611 regulator-min-microvolt = <1104000>;
612 regulator-max-microvolt = <1200000>;
613 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
617 regulator-name = "vreg_l3n_2p8";
618 regulator-min-microvolt = <2800000>;
619 regulator-max-microvolt = <3000000>;
620 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
624 regulator-name = "vreg_l4n_2p8";
625 regulator-min-microvolt = <2800000>;
626 regulator-max-microvolt = <3300000>;
627 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
631 regulator-name = "vreg_l5n_1p8";
632 regulator-min-microvolt = <1800000>;
633 regulator-max-microvolt = <1800000>;
634 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
638 regulator-name = "vreg_l6n_3p3";
639 regulator-min-microvolt = <2800000>;
640 regulator-max-microvolt = <3304000>;
641 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
645 regulator-name = "vreg_l7n_2p96";
646 regulator-min-microvolt = <2800000>;
647 regulator-max-microvolt = <2960000>;
648 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
660 typec-retimer@1c {
664 vcc-supply = <&vreg_l15b_1p8>;
666 retimer-switch;
667 orientation-switch;
670 #address-cells = <1>;
671 #size-cells = <0>;
677 remote-endpoint = <&pmic_glink_ss_in>;
681 port@1 {
682 reg = <1>;
685 data-lanes = <3 2 1 0>;
686 remote-endpoint = <&usb_dp_qmpphy_out>;
692 typec-mux@42 {
696 vcc-supply = <&vreg_bob1>;
698 mode-switch;
699 orientation-switch;
703 remote-endpoint = <&pmic_glink_sbu>;
710 qcom,gsi-loader = "self";
711 memory-region = <&ipa_fw_mem>;
712 firmware-name = "qcom/sm8550/ipa_fws.mbn";
722 <&ufs_mem_phy 1>,
730 zap-shader {
731 firmware-name = "qcom/sm8550/a740_zap.mbn";
736 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
739 drive-strength = <16>;
740 bias-disable;
741 output-low;
744 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
747 drive-strength = <16>;
748 bias-disable;
749 output-low;
758 vdda-supply = <&vreg_l3e_1p2>;
765 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
766 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
767 pinctrl-names = "default", "sleep";
769 vci-supply = <&vreg_l13b_3p0>;
770 vdd-supply = <&vreg_l11b_1p2>;
771 vddio-supply = <&vreg_l12b_1p8>;
773 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
777 remote-endpoint = <&mdss_dsi0_out>;
784 remote-endpoint = <&panel0_in>;
785 data-lanes = <0 1 2 3>;
789 vdds-supply = <&vreg_l1e_0p88>;
798 data-lanes = <0 1>;
799 remote-endpoint = <&usb_dp_qmpphy_dp_in>;
807 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
808 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
810 pinctrl-0 = <&pcie0_default_state>;
811 pinctrl-names = "default";
817 vdda-phy-supply = <&vreg_l1e_0p88>;
818 vdda-pll-supply = <&vreg_l3e_1p2>;
826 led-0 {
829 led-sources = <1>, <4>;
830 led-max-microamp = <500000>;
831 flash-max-microamp = <2000000>;
832 flash-max-timeout-us = <1280000>;
833 function-enumerator = <0>;
836 led-1 {
839 led-sources = <2>, <3>;
840 led-max-microamp = <500000>;
841 flash-max-microamp = <2000000>;
842 flash-max-timeout-us = <1280000>;
843 function-enumerator = <1>;
848 volume_up_n: volume-up-n-state {
851 power-source = <1>;
852 bias-pull-up;
853 input-enable;
860 multi-led {
864 #address-cells = <1>;
865 #size-cells = <0>;
867 led@1 {
868 reg = <1>;
885 vdd18-supply = <&vreg_l15b_1p8>;
886 vdd3-supply = <&vreg_l5b_3p1>;
900 clock-frequency = <1000>;
912 firmware-name = "qcom/sm8550/adsp.mbn",
918 firmware-name = "qcom/sm8550/cdsp.mbn",
924 firmware-name = "qcom/sm8550/modem.mbn",
930 clock-frequency = <32000>;
940 pinctrl-names = "default";
941 pinctrl-0 = <&spkr_1_sd_n_active>;
942 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
943 #sound-dai-cells = <0>;
944 sound-name-prefix = "SpkrLeft";
945 vdd-1p8-supply = <&vreg_l15b_1p8>;
946 vdd-io-supply = <&vreg_l3g_1p2>;
950 south_spkr: speaker@0,1 {
952 reg = <0 1>;
953 pinctrl-names = "default";
954 pinctrl-0 = <&spkr_2_sd_n_active>;
955 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
956 #sound-dai-cells = <0>;
957 sound-name-prefix = "SpkrRight";
958 vdd-1p8-supply = <&vreg_l15b_1p8>;
959 vdd-io-supply = <&vreg_l3g_1p2>;
970 qcom,rx-port-mapping = <1 2 3 4 5>;
981 qcom,tx-port-mapping = <1 1 2 3>;
986 gpio-reserved-ranges = <32 8>;
988 bt_default: bt-default-state {
989 bt-en-pins {
992 drive-strength = <16>;
993 bias-disable;
996 sw-ctrl-pins {
999 bias-pull-down;
1003 sde_dsi_active: sde-dsi-active-state {
1006 drive-strength = <8>;
1007 bias-disable;
1010 sde_dsi_suspend: sde-dsi-suspend-state {
1013 drive-strength = <2>;
1014 bias-pull-down;
1017 sde_te_active: sde-te-active-state {
1020 drive-strength = <2>;
1021 bias-pull-down;
1024 sde_te_suspend: sde-te-suspend-state {
1027 drive-strength = <2>;
1028 bias-pull-down;
1031 wcd_default: wcd-reset-n-active-state {
1034 drive-strength = <16>;
1035 bias-disable;
1036 output-low;
1048 compatible = "qcom,wcn7850-bt";
1050 vddio-supply = <&vreg_l15b_1p8>;
1051 vddaon-supply = <&vreg_s4e_0p95>;
1052 vdddig-supply = <&vreg_s4e_0p95>;
1053 vddrfa0p8-supply = <&vreg_s4e_0p95>;
1054 vddrfa1p2-supply = <&vreg_s4g_1p25>;
1055 vddrfa1p9-supply = <&vreg_s6g_1p86>;
1057 max-speed = <3200000>;
1059 enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
1060 swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
1062 pinctrl-0 = <&bt_default>;
1063 pinctrl-names = "default";
1068 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
1069 vcc-supply = <&vreg_l17b_2p5>;
1070 vcc-max-microamp = <1300000>;
1071 vccq-supply = <&vreg_l1g_1p2>;
1072 vccq-max-microamp = <1200000>;
1073 vdd-hba-supply = <&vreg_l3g_1p2>;
1079 vdda-phy-supply = <&vreg_l1d_0p88>;
1080 vdda-pll-supply = <&vreg_l3e_1p2>;
1091 usb-role-switch;
1095 remote-endpoint = <&pmic_glink_hs_in>;
1099 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
1103 vdd-supply = <&vreg_l1e_0p88>;
1104 vdda12-supply = <&vreg_l3e_1p2>;
1112 vdda-phy-supply = <&vreg_l3e_1p2>;
1113 vdda-pll-supply = <&vreg_l3f_0p88>;
1115 orientation-switch;
1121 remote-endpoint = <&mdss_dp0_out>;
1125 remote-endpoint = <&redriver_ss_in>;
1129 remote-endpoint = <&usb_1_dwc3_ss>;
1133 clock-frequency = <76800000>;