Lines Matching +full:vdd +full:- +full:1
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
22 compatible = "qcom,sm8550-mtp", "qcom,sm8550";
23 chassis-type = "handset";
29 wcd938x: audio-codec {
30 compatible = "qcom,wcd9385-codec";
32 pinctrl-names = "default";
33 pinctrl-0 = <&wcd_default>;
35 qcom,micbias1-microvolt = <1800000>;
36 qcom,micbias2-microvolt = <1800000>;
37 qcom,micbias3-microvolt = <1800000>;
38 qcom,micbias4-microvolt = <1800000>;
39 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
40 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
41 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
42 qcom,rx-device = <&wcd_rx>;
43 qcom,tx-device = <&wcd_tx>;
45 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
47 vdd-buck-supply = <&vreg_l15b_1p8>;
48 vdd-rxtx-supply = <&vreg_l15b_1p8>;
49 vdd-io-supply = <&vreg_l15b_1p8>;
50 vdd-mic-bias-supply = <&vreg_bob1>;
52 #sound-dai-cells = <1>;
56 stdout-path = "serial0:115200n8";
59 pmic-glink {
60 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
61 #address-cells = <1>;
62 #size-cells = <0>;
63 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
66 compatible = "usb-c-connector";
68 power-role = "dual";
69 data-role = "dual";
72 #address-cells = <1>;
73 #size-cells = <0>;
79 remote-endpoint = <&usb_1_dwc3_hs>;
83 port@1 {
84 reg = <1>;
87 remote-endpoint = <&usb_dp_qmpphy_out>;
95 remote-endpoint = <&fsa4480_sbu_mux>;
103 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
104 model = "SM8550-MTP";
105 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
118 wcd-playback-dai-link {
119 link-name = "WCD Playback";
122 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
126 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
130 sound-dai = <&q6apm>;
134 wcd-capture-dai-link {
135 link-name = "WCD Capture";
138 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
142 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
146 sound-dai = <&q6apm>;
150 wsa-dai-link {
151 link-name = "WSA Playback";
154 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
158 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
162 sound-dai = <&q6apm>;
166 va-dai-link {
167 link-name = "VA Capture";
170 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
174 sound-dai = <&lpass_vamacro 0>;
178 sound-dai = <&q6apm>;
183 vph_pwr: vph-pwr-regulator {
184 compatible = "regulator-fixed";
185 regulator-name = "vph_pwr";
186 regulator-min-microvolt = <3700000>;
187 regulator-max-microvolt = <3700000>;
189 regulator-always-on;
190 regulator-boot-on;
195 regulators-0 {
196 compatible = "qcom,pm8550-rpmh-regulators";
197 qcom,pmic-id = "b";
199 vdd-bob1-supply = <&vph_pwr>;
200 vdd-bob2-supply = <&vph_pwr>;
201 vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
202 vdd-l2-l13-l14-supply = <&vreg_bob1>;
203 vdd-l3-supply = <&vreg_s4g_1p3>;
204 vdd-l5-l16-supply = <&vreg_bob1>;
205 vdd-l6-l7-supply = <&vreg_bob1>;
206 vdd-l8-l9-supply = <&vreg_bob1>;
207 vdd-l11-supply = <&vreg_s4g_1p3>;
208 vdd-l12-supply = <&vreg_s6g_1p8>;
209 vdd-l15-supply = <&vreg_s6g_1p8>;
210 vdd-l17-supply = <&vreg_bob2>;
213 regulator-name = "vreg_bob1";
214 regulator-min-microvolt = <3296000>;
215 regulator-max-microvolt = <3960000>;
216 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
220 regulator-name = "vreg_bob2";
221 regulator-min-microvolt = <2720000>;
222 regulator-max-microvolt = <3960000>;
223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
227 regulator-name = "vreg_l1b_1p8";
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <1800000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234 regulator-name = "vreg_l2b_3p0";
235 regulator-min-microvolt = <3008000>;
236 regulator-max-microvolt = <3008000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
241 regulator-name = "vreg_l5b_3p1";
242 regulator-min-microvolt = <3104000>;
243 regulator-max-microvolt = <3104000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248 regulator-name = "vreg_l6b_1p8";
249 regulator-min-microvolt = <1800000>;
250 regulator-max-microvolt = <3008000>;
251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
255 regulator-name = "vreg_l7b_1p8";
256 regulator-min-microvolt = <1800000>;
257 regulator-max-microvolt = <3008000>;
258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
262 regulator-name = "vreg_l8b_1p8";
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <3008000>;
265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 regulator-name = "vreg_l9b_2p9";
270 regulator-min-microvolt = <2960000>;
271 regulator-max-microvolt = <3008000>;
272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276 regulator-name = "vreg_l11b_1p2";
277 regulator-min-microvolt = <1200000>;
278 regulator-max-microvolt = <1504000>;
279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283 regulator-name = "vreg_l12b_1p8";
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <1800000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
290 regulator-name = "vreg_l13b_3p0";
291 regulator-min-microvolt = <3000000>;
292 regulator-max-microvolt = <3000000>;
293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
297 regulator-name = "vreg_l14b_3p2";
298 regulator-min-microvolt = <3200000>;
299 regulator-max-microvolt = <3200000>;
300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
304 regulator-name = "vreg_l15b_1p8";
305 regulator-min-microvolt = <1800000>;
306 regulator-max-microvolt = <1800000>;
307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
311 regulator-name = "vreg_l16b_2p8";
312 regulator-min-microvolt = <2800000>;
313 regulator-max-microvolt = <2800000>;
314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
318 regulator-name = "vreg_l17b_2p5";
319 regulator-min-microvolt = <2504000>;
320 regulator-max-microvolt = <2504000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
325 regulators-1 {
326 compatible = "qcom,pm8550vs-rpmh-regulators";
327 qcom,pmic-id = "c";
329 vdd-l3-supply = <&vreg_s4e_0p9>;
332 regulator-name = "vreg_l3c_0p9";
333 regulator-min-microvolt = <880000>;
334 regulator-max-microvolt = <912000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
339 regulators-2 {
340 compatible = "qcom,pm8550vs-rpmh-regulators";
341 qcom,pmic-id = "d";
343 vdd-l1-supply = <&vreg_s4e_0p9>;
346 regulator-name = "vreg_l1d_0p88";
347 regulator-min-microvolt = <880000>;
348 regulator-max-microvolt = <920000>;
349 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
353 regulators-3 {
354 compatible = "qcom,pm8550vs-rpmh-regulators";
355 qcom,pmic-id = "e";
357 vdd-l1-supply = <&vreg_s4e_0p9>;
358 vdd-l2-supply = <&vreg_s4e_0p9>;
359 vdd-l3-supply = <&vreg_s4g_1p3>;
360 vdd-s4-supply = <&vph_pwr>;
361 vdd-s5-supply = <&vph_pwr>;
364 regulator-name = "vreg_s4e_0p9";
365 regulator-min-microvolt = <904000>;
366 regulator-max-microvolt = <984000>;
367 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
371 regulator-name = "vreg_s5e_1p1";
372 regulator-min-microvolt = <1080000>;
373 regulator-max-microvolt = <1120000>;
374 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
378 regulator-name = "vreg_l1e_0p88";
379 regulator-min-microvolt = <880000>;
380 regulator-max-microvolt = <880000>;
381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
385 regulator-name = "vreg_l2e_0p9";
386 regulator-min-microvolt = <904000>;
387 regulator-max-microvolt = <970000>;
388 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392 regulator-name = "vreg_l3e_1p2";
393 regulator-min-microvolt = <1200000>;
394 regulator-max-microvolt = <1200000>;
395 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
399 regulators-4 {
400 compatible = "qcom,pm8550ve-rpmh-regulators";
401 qcom,pmic-id = "f";
403 vdd-l1-supply = <&vreg_s4e_0p9>;
404 vdd-l2-supply = <&vreg_s4e_0p9>;
405 vdd-l3-supply = <&vreg_s4e_0p9>;
406 vdd-s4-supply = <&vph_pwr>;
409 regulator-name = "vreg_s4f_0p5";
410 regulator-min-microvolt = <500000>;
411 regulator-max-microvolt = <700000>;
412 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
416 regulator-name = "vreg_l1f_0p9";
417 regulator-min-microvolt = <912000>;
418 regulator-max-microvolt = <912000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
423 regulator-name = "vreg_l2f_0p88";
424 regulator-min-microvolt = <880000>;
425 regulator-max-microvolt = <912000>;
426 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
430 regulator-name = "vreg_l3f_0p91";
431 regulator-min-microvolt = <880000>;
432 regulator-max-microvolt = <912000>;
433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
437 regulators-5 {
438 compatible = "qcom,pm8550vs-rpmh-regulators";
439 qcom,pmic-id = "g";
441 vdd-l1-supply = <&vreg_s4g_1p3>;
442 vdd-l2-supply = <&vreg_s4g_1p3>;
443 vdd-l3-supply = <&vreg_s4g_1p3>;
444 vdd-s1-supply = <&vph_pwr>;
445 vdd-s2-supply = <&vph_pwr>;
446 vdd-s3-supply = <&vph_pwr>;
447 vdd-s4-supply = <&vph_pwr>;
448 vdd-s5-supply = <&vph_pwr>;
449 vdd-s6-supply = <&vph_pwr>;
452 regulator-name = "vreg_s1g_1p2";
453 regulator-min-microvolt = <1200000>;
454 regulator-max-microvolt = <1300000>;
455 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
459 regulator-name = "vreg_s2g_0p8";
460 regulator-min-microvolt = <800000>;
461 regulator-max-microvolt = <1000000>;
462 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
466 regulator-name = "vreg_s3g_0p7";
467 regulator-min-microvolt = <300000>;
468 regulator-max-microvolt = <1004000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
473 regulator-name = "vreg_s4g_1p3";
474 regulator-min-microvolt = <1200000>;
475 regulator-max-microvolt = <1352000>;
476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
480 regulator-name = "vreg_s5g_0p8";
481 regulator-min-microvolt = <500000>;
482 regulator-max-microvolt = <1004000>;
483 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
487 regulator-name = "vreg_s6g_1p8";
488 regulator-min-microvolt = <1800000>;
489 regulator-max-microvolt = <2000000>;
490 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
494 regulator-name = "vreg_l1g_1p2";
495 regulator-min-microvolt = <1200000>;
496 regulator-max-microvolt = <1200000>;
497 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
501 regulator-name = "vreg_l2g_1p2";
502 regulator-min-microvolt = <1200000>;
503 regulator-max-microvolt = <1200000>;
504 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
508 regulator-name = "vreg_l3g_1p2";
509 regulator-min-microvolt = <1200000>;
510 regulator-max-microvolt = <1200000>;
511 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
515 regulators-6 {
516 compatible = "qcom,pm8010-rpmh-regulators";
517 qcom,pmic-id = "m";
519 vdd-l1-l2-supply = <&vreg_s4g_1p3>;
520 vdd-l3-l4-supply = <&vreg_bob2>;
521 vdd-l5-supply = <&vreg_s6g_1p8>;
522 vdd-l6-supply = <&vreg_s6g_1p8>;
523 vdd-l7-supply = <&vreg_bob1>;
526 regulator-name = "vreg_l1m_1p056";
527 regulator-min-microvolt = <1056000>;
528 regulator-max-microvolt = <1056000>;
529 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
533 regulator-name = "vreg_l2m_1p056";
534 regulator-min-microvolt = <1056000>;
535 regulator-max-microvolt = <1056000>;
536 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
540 regulator-name = "vreg_l3m_2p8";
541 regulator-min-microvolt = <2800000>;
542 regulator-max-microvolt = <2800000>;
543 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
547 regulator-name = "vreg_l4m_2p8";
548 regulator-min-microvolt = <2800000>;
549 regulator-max-microvolt = <2800000>;
550 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
554 regulator-name = "vreg_l5m_1p8";
555 regulator-min-microvolt = <1800000>;
556 regulator-max-microvolt = <1800000>;
557 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
561 regulator-name = "vreg_l6m_1p8";
562 regulator-min-microvolt = <1800000>;
563 regulator-max-microvolt = <1800000>;
564 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
568 regulator-name = "vreg_l7m_2p9";
569 regulator-min-microvolt = <2800000>;
570 regulator-max-microvolt = <2904000>;
571 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
575 regulators-7 {
576 compatible = "qcom,pm8010-rpmh-regulators";
577 qcom,pmic-id = "n";
579 vdd-l1-l2-supply = <&vreg_s4g_1p3>;
580 vdd-l3-l4-supply = <&vreg_bob2>;
581 vdd-l5-supply = <&vreg_s6g_1p8>;
582 vdd-l6-supply = <&vreg_bob1>;
583 vdd-l7-supply = <&vreg_bob1>;
586 regulator-name = "vreg_l1n_1p1";
587 regulator-min-microvolt = <1104000>;
588 regulator-max-microvolt = <1200000>;
589 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
593 regulator-name = "vreg_l2n_1p1";
594 regulator-min-microvolt = <1104000>;
595 regulator-max-microvolt = <1200000>;
596 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
600 regulator-name = "vreg_l3n_2p8";
601 regulator-min-microvolt = <2800000>;
602 regulator-max-microvolt = <3000000>;
603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
607 regulator-name = "vreg_l4n_2p8";
608 regulator-min-microvolt = <2800000>;
609 regulator-max-microvolt = <3300000>;
610 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
614 regulator-name = "vreg_l5n_1p8";
615 regulator-min-microvolt = <1800000>;
616 regulator-max-microvolt = <1800000>;
617 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
621 regulator-name = "vreg_l6n_3p3";
622 regulator-min-microvolt = <2800000>;
623 regulator-max-microvolt = <3304000>;
624 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
628 regulator-name = "vreg_l7n_2p96";
629 regulator-min-microvolt = <2800000>;
630 regulator-max-microvolt = <2960000>;
631 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
639 zap-shader {
640 firmware-name = "qcom/sm8550/a740_zap.mbn";
651 typec-mux@42 {
655 vcc-supply = <&vreg_bob1>;
657 mode-switch;
658 orientation-switch;
662 remote-endpoint = <&pmic_glink_sbu>;
669 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
672 drive-strength = <16>;
673 bias-disable;
674 output-low;
677 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
680 drive-strength = <16>;
681 bias-disable;
682 output-low;
691 vdda-supply = <&vreg_l3e_1p2>;
698 pinctrl-names = "default", "sleep";
699 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
700 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
702 vddio-supply = <&vreg_l12b_1p8>;
703 vci-supply = <&vreg_l13b_3p0>;
704 vdd-supply = <&vreg_l11b_1p2>;
706 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
710 remote-endpoint = <&mdss_dsi0_out>;
717 remote-endpoint = <&panel0_in>;
718 data-lanes = <0 1 2 3>;
722 vdds-supply = <&vreg_l1e_0p88>;
731 data-lanes = <0 1>;
732 remote-endpoint = <&usb_dp_qmpphy_dp_in>;
736 clock-frequency = <1000>;
740 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
741 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
743 pinctrl-names = "default";
744 pinctrl-0 = <&pcie0_default_state>;
750 vdda-phy-supply = <&vreg_l1e_0p88>;
751 vdda-pll-supply = <&vreg_l3e_1p2>;
757 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
758 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
760 pinctrl-names = "default";
761 pinctrl-0 = <&pcie1_default_state>;
767 vdda-phy-supply = <&vreg_l3c_0p91>;
768 vdda-pll-supply = <&vreg_l3e_1p2>;
769 vdda-qref-supply = <&vreg_l1e_0p88>;
775 sdc2_card_det_n: sdc2-card-det-state {
778 input-enable;
779 output-disable;
780 bias-pull-up;
781 power-source = <1>; /* 1.8 V */
786 vdd18-supply = <&vreg_l15b_1p8>;
787 vdd3-supply = <&vreg_l5b_3p1>;
795 firmware-name = "qcom/sm8550/adsp.mbn",
801 firmware-name = "qcom/sm8550/cdsp.mbn",
807 firmware-name = "qcom/sm8550/modem.mbn",
813 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
814 pinctrl-names = "default", "sleep";
815 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
816 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
817 vmmc-supply = <&vreg_l9b_2p9>;
818 vqmmc-supply = <&vreg_l8b_1p8>;
819 bus-width = <4>;
820 no-sdio;
821 no-mmc;
826 clock-frequency = <32000>;
836 pinctrl-names = "default";
837 pinctrl-0 = <&spkr_1_sd_n_active>;
838 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
839 #sound-dai-cells = <0>;
840 sound-name-prefix = "SpkrLeft";
841 vdd-1p8-supply = <&vreg_l15b_1p8>;
842 vdd-io-supply = <&vreg_l3g_1p2>;
846 right_spkr: speaker@0,1 {
848 reg = <0 1>;
849 pinctrl-names = "default";
850 pinctrl-0 = <&spkr_2_sd_n_active>;
851 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
852 #sound-dai-cells = <0>;
853 sound-name-prefix = "SpkrRight";
854 vdd-1p8-supply = <&vreg_l15b_1p8>;
855 vdd-io-supply = <&vreg_l3g_1p2>;
866 qcom,rx-port-mapping = <1 2 3 4 5>;
877 qcom,tx-port-mapping = <1 1 2 3>;
882 gpio-reserved-ranges = <32 8>;
884 sde_dsi_active: sde-dsi-active-state {
887 drive-strength = <8>;
888 bias-disable;
891 sde_dsi_suspend: sde-dsi-suspend-state {
894 drive-strength = <2>;
895 bias-pull-down;
898 sde_te_active: sde-te-active-state {
901 drive-strength = <2>;
902 bias-pull-down;
905 sde_te_suspend: sde-te-suspend-state {
908 drive-strength = <2>;
909 bias-pull-down;
912 wcd_default: wcd-reset-n-active-state {
915 drive-strength = <16>;
916 bias-disable;
917 output-low;
926 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
927 vcc-supply = <&vreg_l17b_2p5>;
928 vcc-max-microamp = <1300000>;
929 vccq-supply = <&vreg_l1g_1p2>;
930 vccq-max-microamp = <1200000>;
931 vdd-hba-supply = <&vreg_l3g_1p2>;
937 vdda-phy-supply = <&vreg_l1d_0p88>;
938 vdda-pll-supply = <&vreg_l3e_1p2>;
949 usb-role-switch;
953 remote-endpoint = <&pmic_glink_hs_in>;
957 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
961 vdd-supply = <&vreg_l1e_0p88>;
962 vdda12-supply = <&vreg_l3e_1p2>;
970 vdda-phy-supply = <&vreg_l3e_1p2>;
971 vdda-pll-supply = <&vreg_l3f_0p91>;
973 orientation-switch;
979 remote-endpoint = <&mdss_dp0_out>;
983 remote-endpoint = <&pmic_glink_ss_in>;
987 remote-endpoint = <&usb_1_dwc3_ss>;
991 clock-frequency = <76800000>;