Lines Matching +full:vdd +full:- +full:1
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
20 qcom,msm-id = <321 0x20001>;
21 qcom,board-id = <11 0>;
30 #address-cells = <2>;
31 #size-cells = <2>;
34 stdout-path = "serial0";
38 compatible = "simple-framebuffer";
47 gpio-keys {
48 compatible = "gpio-keys";
51 pinctrl-names = "default";
52 pinctrl-0 = <&volume_up_gpio>;
54 key-vol-up {
58 debounce-interval = <15>;
62 reserved-memory {
65 no-map;
71 record-size = <0x40000>;
72 console-size = <0x40000>;
73 ftrace-size = <0x40000>;
74 pmsg-size = <0x200000>;
75 ecc-size = <0x0>;
80 compatible = "simple-battery";
82 charge-full-design-microamp-hours = <3850000>;
83 voltage-min-design-microvolt = <3600000>;
84 voltage-max-design-microvolt = <4400000>;
87 vph_pwr: vph-pwr-regulator {
88 compatible = "regulator-fixed";
89 regulator-name = "vph_pwr";
90 regulator-min-microvolt = <3700000>;
91 regulator-max-microvolt = <3700000>;
94 vreg_s4a_1p8: pm8998-smps4 {
95 compatible = "regulator-fixed";
96 regulator-name = "vreg_s4a_1p8";
98 regulator-min-microvolt = <1800000>;
99 regulator-max-microvolt = <1800000>;
101 regulator-always-on;
102 regulator-boot-on;
104 vin-supply = <&vph_pwr>;
110 firmware-name = "qcom/sdm845/axolotl/adsp.mbn";
114 regulators-0 {
115 compatible = "qcom,pm8998-rpmh-regulators";
116 qcom,pmic-id = "a";
118 vdd-s1-supply = <&vph_pwr>;
119 vdd-s2-supply = <&vph_pwr>;
120 vdd-s3-supply = <&vph_pwr>;
121 vdd-s4-supply = <&vph_pwr>;
122 vdd-s5-supply = <&vph_pwr>;
123 vdd-s6-supply = <&vph_pwr>;
124 vdd-s7-supply = <&vph_pwr>;
125 vdd-s8-supply = <&vph_pwr>;
126 vdd-s9-supply = <&vph_pwr>;
127 vdd-s10-supply = <&vph_pwr>;
128 vdd-s11-supply = <&vph_pwr>;
129 vdd-s12-supply = <&vph_pwr>;
130 vdd-s13-supply = <&vph_pwr>;
131 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
132 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
133 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
134 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
135 vdd-l6-supply = <&vph_pwr>;
136 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
137 vdd-l9-supply = <&vreg_bob>;
138 vdd-l10-l23-l25-supply = <&vreg_bob>;
139 vdd-l13-l19-l21-supply = <&vreg_bob>;
140 vdd-l16-l28-supply = <&vreg_bob>;
141 vdd-l18-l22-supply = <&vreg_bob>;
142 vdd-l20-l24-supply = <&vreg_bob>;
143 vdd-l26-supply = <&vreg_s3a_1p35>;
144 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
147 regulator-min-microvolt = <1100000>;
148 regulator-max-microvolt = <1100000>;
152 regulator-min-microvolt = <1352000>;
153 regulator-max-microvolt = <1352000>;
157 regulator-min-microvolt = <1904000>;
158 regulator-max-microvolt = <2040000>;
162 regulator-min-microvolt = <900000>;
163 regulator-max-microvolt = <1028000>;
185 regulator-min-microvolt = <880000>;
186 regulator-max-microvolt = <880000>;
187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
192 regulator-min-microvolt = <1200000>;
193 regulator-max-microvolt = <1200000>;
194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
195 regulator-always-on;
199 regulator-min-microvolt = <1000000>;
200 regulator-max-microvolt = <1000000>;
201 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208 regulator-min-microvolt = <800000>;
209 regulator-max-microvolt = <800000>;
210 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
215 regulator-min-microvolt = <1856000>;
216 regulator-max-microvolt = <1856000>;
217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
227 regulator-min-microvolt = <1200000>;
228 regulator-max-microvolt = <1248000>;
229 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
233 regulator-min-microvolt = <1704000>;
234 regulator-max-microvolt = <2928000>;
235 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
239 regulator-min-microvolt = <1704000>;
240 regulator-max-microvolt = <2928000>;
241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 regulator-min-microvolt = <1000000>;
246 regulator-max-microvolt = <1048000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 regulator-min-microvolt = <1800000>;
259 regulator-max-microvolt = <1800000>;
260 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265 regulator-min-microvolt = <1800000>;
266 regulator-max-microvolt = <2960000>;
267 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
271 regulator-min-microvolt = <1800000>;
272 regulator-max-microvolt = <1800000>;
273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
277 regulator-min-microvolt = <1800000>;
278 regulator-max-microvolt = <1800000>;
279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283 regulator-min-microvolt = <2704000>;
284 regulator-max-microvolt = <2704000>;
285 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
289 regulator-min-microvolt = <1304000>;
290 regulator-max-microvolt = <1304000>;
291 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
295 regulator-min-microvolt = <2704000>;
296 regulator-max-microvolt = <2960000>;
297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 regulator-min-microvolt = <2856000>;
302 regulator-max-microvolt = <3104000>;
303 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307 regulator-min-microvolt = <2704000>;
308 regulator-max-microvolt = <2960000>;
309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
313 regulator-min-microvolt = <2704000>;
314 regulator-max-microvolt = <2960000>;
315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 regulator-min-microvolt = <2864000>;
320 regulator-max-microvolt = <3312000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
325 regulator-min-microvolt = <3000000>;
326 regulator-max-microvolt = <3312000>;
327 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
332 regulator-min-microvolt = <3088000>;
333 regulator-max-microvolt = <3088000>;
334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
338 regulator-min-microvolt = <3300000>;
339 regulator-max-microvolt = <3312000>;
340 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
357 regulator-min-microvolt = <1200000>;
358 regulator-max-microvolt = <1200000>;
359 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
363 regulator-min-microvolt = <2856000>;
364 regulator-max-microvolt = <3008000>;
365 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
369 regulator-min-microvolt = <1800000>;
370 regulator-max-microvolt = <1800000>;
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
379 regulators-1 {
380 compatible = "qcom,pmi8998-rpmh-regulators";
381 qcom,pmic-id = "b";
383 vdd-bob-supply = <&vph_pwr>;
386 regulator-min-microvolt = <3312000>;
387 regulator-max-microvolt = <3600000>;
388 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
389 regulator-allow-bypass;
393 regulators-2 {
394 compatible = "qcom,pm8005-rpmh-regulators";
395 qcom,pmic-id = "c";
397 vdd-s1-supply = <&vph_pwr>;
398 vdd-s2-supply = <&vph_pwr>;
399 vdd-s3-supply = <&vph_pwr>;
400 vdd-s4-supply = <&vph_pwr>;
403 regulator-min-microvolt = <600000>;
404 regulator-max-microvolt = <600000>;
411 firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
415 protected-clocks = <GCC_QSPI_CORE_CLK>,
429 zap-shader {
430 memory-region = <&gpu_mem>;
431 firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
441 wakeup-source;
442 interrupt-parent = <&tlmm>;
444 vdd-supply = <&vreg_l28a_3p0>;
445 vcc-i2c-supply = <&vreg_l14a_1p88>;
447 pinctrl-names = "default", "suspend";
448 pinctrl-0 = <&ts_int_active &ts_reset_active>;
449 pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
451 reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
452 irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
453 touchscreen-size-x = <1080>;
454 touchscreen-size-y = <2160>;
455 focaltech,max-touch-number = <5>;
464 qcom,gsi-loader = "self";
465 memory-region = <&ipa_fw_mem>;
466 firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn";
476 vdda-supply = <&vdda_mipi_dsi0_1p2>;
479 compatible = "visionox,rm69299-shift";
482 vdda-supply = <&vreg_l14a_1p88>;
483 vdd3p3-supply = <&vreg_l28a_3p0>;
485 #address-cells = <1>;
486 #size-cells = <0>;
488 reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
490 pinctrl-names = "default", "sleep";
491 pinctrl-0 = <&sde_dsi_active &sde_te_active>;
492 pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
496 remote-endpoint = <&mdss_dsi0_out>;
503 remote-endpoint = <&panel_in_0>;
504 data-lanes = <0 1 2 3>;
509 vdds-supply = <&vdda_mipi_dsi0_pll>;
514 firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
518 volume_up_gpio: pm8998-gpio6-state {
522 input-enable;
523 bias-pull-up;
524 qcom,drive-strength = <0>;
530 monitored-battery = <&battery>;
543 multi-led {
547 #address-cells = <1>;
548 #size-cells = <0>;
570 led-0 {
573 led-sources = <1>;
574 led-max-microamp = <100000>;
575 flash-max-microamp = <1100000>;
576 flash-max-timeout-us = <1280000>;
579 led-1 {
582 led-sources = <2>;
583 led-max-microamp = <100000>;
584 flash-max-microamp = <1100000>;
585 flash-max-timeout-us = <1280000>;
590 drive-strength = <2>;
591 bias-pull-up;
595 drive-strength = <2>;
596 bias-disable;
608 firmware-name = "qcom/sdm845/axolotl/slpi.mbn";
613 gpio-reserved-ranges = <0 4>, <81 4>;
615 sde_dsi_active: sde-dsi-active-state {
618 drive-strength = <8>;
619 bias-disable;
622 sde_dsi_suspend: sde-dsi-suspend-state {
625 drive-strength = <2>;
626 bias-pull-down;
629 sde_te_active: sde-te-active-state {
632 drive-strength = <2>;
633 bias-pull-down;
636 sde_te_suspend: sde-te-suspend-state {
639 drive-strength = <2>;
640 bias-pull-down;
643 ts_int_active: ts-int-active-state {
646 drive-strength = <8>;
647 bias-pull-up;
650 ts_int_suspend: ts-int-suspend-state {
653 drive-strength = <2>;
654 bias-pull-down;
657 ts_reset_active: ts-reset-active-state {
660 drive-strength = <8>;
661 bias-pull-up;
664 ts_reset_suspend: ts-reset-suspend-state {
667 drive-strength = <2>;
668 bias-pull-down;
675 pinctrl-0 = <&qup_uart6_4pin>;
678 compatible = "qcom,wcn3990-bt";
684 firmware-name = "axolotl/crnv21.bin";
686 vddio-supply = <&vreg_s4a_1p8>;
687 vddxo-supply = <&vreg_l7a_1p8>;
688 vddrf-supply = <&vreg_l17a_1p3>;
689 vddch0-supply = <&vreg_l25a_3p3>;
690 max-speed = <3200000>;
701 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
703 vcc-supply = <&vreg_l20a_2p95>;
704 vcc-max-microamp = <600000>;
710 vdda-phy-supply = <&vdda_ufs1_core>;
711 vdda-pll-supply = <&vdda_ufs1_1p2>;
725 vdd-supply = <&vreg_l1a_0p875>;
726 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
727 vdda-pll-supply = <&vreg_l12a_1p8>;
733 vdda-phy-supply = <&vreg_l26a_1p2>;
734 vdda-pll-supply = <&vreg_l1a_0p875>;
739 firmware-name = "qcom/sdm845/axolotl/venus.mbn";
745 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
746 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
747 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
748 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
749 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
751 qcom,snoc-host-cap-8bit-quirk;