Lines Matching +full:vdd +full:- +full:1
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 compatible = "qcom,sdm845-mtp", "qcom,sdm845";
18 chassis-type = "handset";
25 stdout-path = "serial0:115200n8";
28 vph_pwr: vph-pwr-regulator {
29 compatible = "regulator-fixed";
30 regulator-name = "vph_pwr";
31 regulator-min-microvolt = <3700000>;
32 regulator-max-microvolt = <3700000>;
37 * is always-on; model it as a fixed regulator.
39 vreg_s4a_1p8: pm8998-smps4 {
40 compatible = "regulator-fixed";
41 regulator-name = "vreg_s4a_1p8";
43 regulator-min-microvolt = <1800000>;
44 regulator-max-microvolt = <1800000>;
46 regulator-always-on;
47 regulator-boot-on;
49 vin-supply = <&vph_pwr>;
52 thermal-zones {
53 xo_thermal: xo-thermal {
54 polling-delay-passive = <0>;
55 polling-delay = <0>;
57 thermal-sensors = <&pm8998_adc_tm 1>;
60 trip-point {
68 msm_thermal: msm-thermal {
69 polling-delay-passive = <0>;
70 polling-delay = <0>;
72 thermal-sensors = <&pm8998_adc_tm 2>;
75 trip-point {
83 pa_thermal: pa-thermal {
84 polling-delay-passive = <0>;
85 polling-delay = <0>;
87 thermal-sensors = <&pm8998_adc_tm 3>;
90 trip-point {
98 quiet_thermal: quiet-thermal {
99 polling-delay-passive = <0>;
100 polling-delay = <0>;
102 thermal-sensors = <&pm8998_adc_tm 4>;
105 trip-point {
117 firmware-name = "qcom/sdm845/adsp.mbn";
121 regulators-0 {
122 compatible = "qcom,pm8998-rpmh-regulators";
123 qcom,pmic-id = "a";
125 vdd-s1-supply = <&vph_pwr>;
126 vdd-s2-supply = <&vph_pwr>;
127 vdd-s3-supply = <&vph_pwr>;
128 vdd-s4-supply = <&vph_pwr>;
129 vdd-s5-supply = <&vph_pwr>;
130 vdd-s6-supply = <&vph_pwr>;
131 vdd-s7-supply = <&vph_pwr>;
132 vdd-s8-supply = <&vph_pwr>;
133 vdd-s9-supply = <&vph_pwr>;
134 vdd-s10-supply = <&vph_pwr>;
135 vdd-s11-supply = <&vph_pwr>;
136 vdd-s12-supply = <&vph_pwr>;
137 vdd-s13-supply = <&vph_pwr>;
138 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
139 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
140 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
141 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
142 vdd-l6-supply = <&vph_pwr>;
143 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
144 vdd-l9-supply = <&vreg_bob>;
145 vdd-l10-l23-l25-supply = <&vreg_bob>;
146 vdd-l13-l19-l21-supply = <&vreg_bob>;
147 vdd-l16-l28-supply = <&vreg_bob>;
148 vdd-l18-l22-supply = <&vreg_bob>;
149 vdd-l20-l24-supply = <&vreg_bob>;
150 vdd-l26-supply = <&vreg_s3a_1p35>;
151 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
154 regulator-min-microvolt = <1100000>;
155 regulator-max-microvolt = <1100000>;
159 regulator-min-microvolt = <1352000>;
160 regulator-max-microvolt = <1352000>;
164 regulator-min-microvolt = <1904000>;
165 regulator-max-microvolt = <2040000>;
169 regulator-min-microvolt = <900000>;
170 regulator-max-microvolt = <1028000>;
192 regulator-min-microvolt = <880000>;
193 regulator-max-microvolt = <880000>;
194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
199 regulator-min-microvolt = <1200000>;
200 regulator-max-microvolt = <1200000>;
201 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
202 regulator-always-on;
206 regulator-min-microvolt = <1000000>;
207 regulator-max-microvolt = <1000000>;
208 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
215 regulator-min-microvolt = <800000>;
216 regulator-max-microvolt = <800000>;
217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
222 regulator-min-microvolt = <1856000>;
223 regulator-max-microvolt = <1856000>;
224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <1800000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234 regulator-min-microvolt = <1200000>;
235 regulator-max-microvolt = <1248000>;
236 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
240 regulator-min-microvolt = <1704000>;
241 regulator-max-microvolt = <2928000>;
242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
246 regulator-min-microvolt = <1704000>;
247 regulator-max-microvolt = <2928000>;
248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
252 regulator-min-microvolt = <1000000>;
253 regulator-max-microvolt = <1048000>;
254 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265 regulator-min-microvolt = <1800000>;
266 regulator-max-microvolt = <1800000>;
267 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <2960000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
278 regulator-min-microvolt = <1800000>;
279 regulator-max-microvolt = <1800000>;
280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <1800000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
290 regulator-min-microvolt = <2704000>;
291 regulator-max-microvolt = <2704000>;
292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
296 regulator-min-microvolt = <1304000>;
297 regulator-max-microvolt = <1304000>;
298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
302 regulator-min-microvolt = <2704000>;
303 regulator-max-microvolt = <2960000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 regulator-min-microvolt = <2856000>;
309 regulator-max-microvolt = <3104000>;
310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
314 regulator-min-microvolt = <2704000>;
315 regulator-max-microvolt = <2960000>;
316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
320 regulator-min-microvolt = <2704000>;
321 regulator-max-microvolt = <2960000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
326 regulator-min-microvolt = <2864000>;
327 regulator-max-microvolt = <3312000>;
328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
332 regulator-min-microvolt = <3000000>;
333 regulator-max-microvolt = <3312000>;
334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
339 regulator-min-microvolt = <3088000>;
340 regulator-max-microvolt = <3088000>;
341 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
345 regulator-min-microvolt = <3300000>;
346 regulator-max-microvolt = <3312000>;
347 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
364 regulator-min-microvolt = <1200000>;
365 regulator-max-microvolt = <1200000>;
366 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
370 regulator-min-microvolt = <2856000>;
371 regulator-max-microvolt = <3008000>;
372 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
376 regulator-min-microvolt = <1800000>;
377 regulator-max-microvolt = <1800000>;
381 regulator-min-microvolt = <1800000>;
382 regulator-max-microvolt = <1800000>;
386 regulators-1 {
387 compatible = "qcom,pmi8998-rpmh-regulators";
388 qcom,pmic-id = "b";
390 vdd-bob-supply = <&vph_pwr>;
393 regulator-min-microvolt = <3312000>;
394 regulator-max-microvolt = <3600000>;
395 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
396 regulator-allow-bypass;
400 regulators-2 {
401 compatible = "qcom,pm8005-rpmh-regulators";
402 qcom,pmic-id = "c";
404 vdd-s1-supply = <&vph_pwr>;
405 vdd-s2-supply = <&vph_pwr>;
406 vdd-s3-supply = <&vph_pwr>;
407 vdd-s4-supply = <&vph_pwr>;
410 regulator-min-microvolt = <600000>;
411 regulator-max-microvolt = <600000>;
418 firmware-name = "qcom/sdm845/cdsp.mbn";
422 protected-clocks = <GCC_QSPI_CORE_CLK>,
436 zap-shader {
437 memory-region = <&gpu_mem>;
438 firmware-name = "qcom/sdm845/a630_zap.mbn";
444 clock-frequency = <400000>;
448 qcom,gsi-loader = "self";
449 memory-region = <&ipa_fw_mem>;
459 vdda-supply = <&vdda_mipi_dsi0_1p2>;
461 qcom,dual-dsi-mode;
462 qcom,master-dsi;
465 port@1 {
467 remote-endpoint = <&truly_in_0>;
468 data-lanes = <0 1 2 3>;
474 compatible = "truly,nt35597-2K-display";
476 vdda-supply = <&vreg_l14a_1p88>;
478 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
479 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
482 #address-cells = <1>;
483 #size-cells = <0>;
488 remote-endpoint = <&mdss_dsi0_out>;
492 port@1 {
493 reg = <1>;
495 remote-endpoint = <&mdss_dsi1_out>;
504 vdds-supply = <&vdda_mipi_dsi0_pll>;
509 vdda-supply = <&vdda_mipi_dsi1_1p2>;
511 qcom,dual-dsi-mode;
514 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
517 port@1 {
519 remote-endpoint = <&truly_in_1>;
520 data-lanes = <0 1 2 3>;
528 vdds-supply = <&vdda_mipi_dsi1_pll>;
533 firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
537 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
539 pinctrl-0 = <&pcie0_default_state>;
540 pinctrl-names = "default";
546 vdda-phy-supply = <&vreg_l1a_0p875>;
547 vdda-pll-supply = <&vreg_l26a_1p2>;
553 perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
555 pinctrl-names = "default";
556 pinctrl-0 = <&pcie1_default_state>;
564 vdda-phy-supply = <&vreg_l1a_0p875>;
565 vdda-pll-supply = <&vreg_l26a_1p2>;
573 qcom,hw-settle-time = <200>;
580 qcom,hw-settle-time = <200>;
587 qcom,hw-settle-time = <200>;
594 qcom,hw-settle-time = <200>;
601 qcom,hw-settle-time = <200>;
608 qcom,hw-settle-time = <200>;
615 xo-thermistor@1 {
616 reg = <1>;
617 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
619 qcom,hw-settle-time-us = <200>;
622 msm-thermistor@2 {
624 io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
626 qcom,hw-settle-time-us = <200>;
629 pa-thermistor@3 {
631 io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
633 qcom,hw-settle-time-us = <200>;
636 quiet-thermistor@4 {
638 io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
640 qcom,hw-settle-time-us = <200>;
656 pinctrl-names = "default";
657 pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
659 vmmc-supply = <&vreg_l21a_2p95>;
660 vqmmc-supply = <&vddpx_2>;
662 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
666 pcie0_default_state: pcie0-default-state {
667 clkreq-pins {
670 bias-pull-up;
673 perst-n-pins {
676 drive-strength = <2>;
677 bias-pull-down;
680 wake-n-pins {
683 drive-strength = <2>;
684 bias-pull-up;
688 pcie1_default_state: pcie1-default-state {
689 clkreq-pins {
692 bias-pull-up;
695 perst-n-pins {
698 drive-strength = <16>;
699 bias-pull-down;
702 wake-n-pins {
705 drive-strength = <2>;
706 bias-pull-up;
718 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
720 vcc-supply = <&vreg_l20a_2p95>;
721 vcc-max-microamp = <600000>;
727 vdda-phy-supply = <&vdda_ufs1_core>;
728 vdda-pll-supply = <&vdda_ufs1_1p2>;
743 vdd-supply = <&vdda_usb1_ss_core>;
744 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
745 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
747 qcom,imp-res-offset-value = <8>;
748 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
749 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
750 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
756 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
757 vdda-pll-supply = <&vdda_usb1_ss_core>;
767 * signal for this port on MTP. Thus (unless you have a non-compliant
777 vdd-supply = <&vdda_usb2_ss_core>;
778 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
779 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
781 qcom,imp-res-offset-value = <8>;
782 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
788 vdda-phy-supply = <&vdda_usb2_ss_1p2>;
789 vdda-pll-supply = <&vdda_usb2_ss_core>;
798 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
799 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
800 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
801 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
803 qcom,snoc-host-cap-8bit-quirk;
804 qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
807 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
810 drive-strength = <2>;
811 bias-disable;
815 drive-strength = <2>;
816 bias-pull-up;
820 drive-strength = <2>;
821 bias-disable;
825 gpio-reserved-ranges = <0 4>, <81 4>;
827 sdc2_clk: sdc2-clk-state {
829 bias-disable;
835 drive-strength = <16>;
838 sdc2_cmd: sdc2-cmd-state {
840 bias-pull-up;
841 drive-strength = <16>;
844 sdc2_data: sdc2-data-state {
846 bias-pull-up;
847 drive-strength = <16>;
850 sd_card_det_n: sd-card-det-n-state {
853 bias-pull-up;