Lines Matching +full:conn +full:- +full:therm
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/sound/qcom,q6afe.h>
11 #include <dt-bindings/sound/qcom,q6asm.h>
12 #include <dt-bindings/usb/pd.h>
20 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
21 qcom,msm-id = <455 0x20001>;
22 qcom,board-id = <11 3>;
31 stdout-path = "serial0:115200n8";
35 clk40M: can-clock {
36 compatible = "fixed-clock";
37 #clock-cells = <0>;
38 clock-frequency = <40000000>;
41 dc12v: dc12v-regulator {
42 compatible = "regulator-fixed";
43 regulator-name = "DC12V";
44 regulator-min-microvolt = <12000000>;
45 regulator-max-microvolt = <12000000>;
46 regulator-always-on;
49 hdmi-out {
50 compatible = "hdmi-connector";
55 remote-endpoint = <<9611_out>;
61 compatible = "gpio-leds";
63 led-user4 {
68 default-state = "off";
69 panic-indicator;
72 led-wlan {
77 linux,default-trigger = "phy0tx";
78 default-state = "off";
81 led-bt {
86 linux,default-trigger = "bluetooth-power";
87 default-state = "off";
91 lt9611_1v2: lt9611-vdd12-regulator {
92 compatible = "regulator-fixed";
93 regulator-name = "LT9611_1V2";
95 vin-supply = <&vdc_3v3>;
96 regulator-min-microvolt = <1200000>;
97 regulator-max-microvolt = <1200000>;
100 lt9611_3v3: lt9611-3v3 {
101 compatible = "regulator-fixed";
102 regulator-name = "LT9611_3V3";
104 vin-supply = <&vdc_3v3>;
105 regulator-min-microvolt = <3300000>;
106 regulator-max-microvolt = <3300000>;
107 regulator-boot-on;
108 regulator-always-on;
111 thermal-zones {
112 conn-thermal {
113 polling-delay-passive = <0>;
114 polling-delay = <0>;
115 thermal-sensors = <&pm8150b_adc_tm 0>;
118 active-config0 {
126 pm8150l-pcb-thermal {
127 polling-delay-passive = <0>;
128 polling-delay = <0>;
129 thermal-sensors = <&pm8150l_adc_tm 1>;
132 active-config0 {
140 skin-msm-thermal {
141 polling-delay-passive = <0>;
142 polling-delay = <0>;
143 thermal-sensors = <&pm8150l_adc_tm 0>;
146 active-config0 {
154 wifi-thermal {
155 polling-delay-passive = <0>;
156 polling-delay = <0>;
157 thermal-sensors = <&pm8150_adc_tm 1>;
160 active-config0 {
168 xo-thermal {
169 polling-delay-passive = <0>;
170 polling-delay = <0>;
171 thermal-sensors = <&pm8150_adc_tm 0>;
174 active-config0 {
183 vbat: vbat-regulator {
184 compatible = "regulator-fixed";
185 regulator-name = "VBAT";
186 vin-supply = <&vreg_l11c_3p3>;
187 regulator-min-microvolt = <4200000>;
188 regulator-max-microvolt = <4200000>;
189 regulator-always-on;
192 vbat_som: vbat-som-regulator {
193 compatible = "regulator-fixed";
194 regulator-name = "VBAT_SOM";
195 vin-supply = <&dc12v>;
196 regulator-min-microvolt = <4200000>;
197 regulator-max-microvolt = <4200000>;
198 regulator-always-on;
201 vdc_3v3: vdc-3v3-regulator {
202 compatible = "regulator-fixed";
203 regulator-name = "VDC_3V3";
204 vin-supply = <&vreg_l11c_3p3>;
205 regulator-min-microvolt = <3300000>;
206 regulator-max-microvolt = <3300000>;
207 regulator-always-on;
210 vdc_5v: vdc-5v-regulator {
211 compatible = "regulator-fixed";
212 regulator-name = "VDC_5V";
214 regulator-min-microvolt = <5000000>;
215 regulator-max-microvolt = <5000000>;
216 regulator-always-on;
217 vin-supply = <&vreg_l11c_3p3>;
220 vph_pwr: vph-pwr-regulator {
221 compatible = "regulator-fixed";
222 regulator-name = "vph_pwr";
223 regulator-min-microvolt = <3700000>;
224 regulator-max-microvolt = <3700000>;
225 regulator-always-on;
228 vreg_s4a_1p8: vreg-s4a-1p8 {
229 compatible = "regulator-fixed";
230 regulator-name = "vreg_s4a_1p8";
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <1800000>;
233 regulator-always-on;
239 firmware-name = "qcom/sm8250/adsp.mbn";
243 regulators-0 {
244 compatible = "qcom,pm8009-1-rpmh-regulators";
245 qcom,pmic-id = "f";
247 vdd-s1-supply = <&vph_pwr>;
248 vdd-s2-supply = <&vph_pwr>;
249 vdd-l2-supply = <&vreg_s8c_1p3>;
250 vdd-l5-l6-supply = <&vreg_bob>;
251 vdd-l7-supply = <&vreg_s4a_1p8>;
254 regulator-name = "vreg_s2f_0p95";
255 regulator-min-microvolt = <900000>;
256 regulator-max-microvolt = <952000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
261 regulator-name = "vreg_l1f_1p1";
262 regulator-min-microvolt = <1104000>;
263 regulator-max-microvolt = <1104000>;
264 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
268 regulator-name = "vreg_l2f_1p2";
269 regulator-min-microvolt = <1200000>;
270 regulator-max-microvolt = <1200000>;
271 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 regulator-name = "vreg_l6f_2p8";
276 regulator-min-microvolt = <2800000>;
277 regulator-max-microvolt = <2800000>;
278 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
282 regulator-name = "vreg_l7f_1p8";
283 regulator-min-microvolt = <1800000>;
284 regulator-max-microvolt = <1800000>;
285 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
289 regulators-1 {
290 compatible = "qcom,pm8150-rpmh-regulators";
291 qcom,pmic-id = "a";
293 vdd-s1-supply = <&vph_pwr>;
294 vdd-s2-supply = <&vph_pwr>;
295 vdd-s3-supply = <&vph_pwr>;
296 vdd-s4-supply = <&vph_pwr>;
297 vdd-s5-supply = <&vph_pwr>;
298 vdd-s6-supply = <&vph_pwr>;
299 vdd-s7-supply = <&vph_pwr>;
300 vdd-s8-supply = <&vph_pwr>;
301 vdd-s9-supply = <&vph_pwr>;
302 vdd-s10-supply = <&vph_pwr>;
303 vdd-l2-l10-supply = <&vreg_bob>;
304 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
305 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
306 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
307 vdd-l13-l16-l17-supply = <&vreg_bob>;
310 regulator-name = "vreg_l2a_3p1";
311 regulator-min-microvolt = <3072000>;
312 regulator-max-microvolt = <3072000>;
313 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 regulator-name = "vreg_l3a_0p9";
318 regulator-min-microvolt = <928000>;
319 regulator-max-microvolt = <932000>;
320 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
324 regulator-name = "vreg_l5a_0p88";
325 regulator-min-microvolt = <880000>;
326 regulator-max-microvolt = <880000>;
327 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
331 regulator-name = "vreg_l6a_1p2";
332 regulator-min-microvolt = <1200000>;
333 regulator-max-microvolt = <1200000>;
334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
338 regulator-name = "vreg_l7a_1p7";
339 regulator-min-microvolt = <1704000>;
340 regulator-max-microvolt = <1800000>;
341 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
345 regulator-name = "vreg_l9a_1p2";
346 regulator-min-microvolt = <1200000>;
347 regulator-max-microvolt = <1200000>;
348 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
352 regulator-name = "vreg_l10a_1p8";
353 regulator-min-microvolt = <1800000>;
354 regulator-max-microvolt = <1800000>;
355 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
359 regulator-name = "vreg_l12a_1p8";
360 regulator-min-microvolt = <1800000>;
361 regulator-max-microvolt = <1800000>;
362 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
366 regulator-name = "vreg_l13a_ts_3p0";
367 regulator-min-microvolt = <3008000>;
368 regulator-max-microvolt = <3008000>;
369 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
373 regulator-name = "vreg_l14a_1p8";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1880000>;
376 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
380 regulator-name = "vreg_l15a_1p8";
381 regulator-min-microvolt = <1800000>;
382 regulator-max-microvolt = <1800000>;
383 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
387 regulator-name = "vreg_l16a_2p7";
388 regulator-min-microvolt = <2704000>;
389 regulator-max-microvolt = <2960000>;
390 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
394 regulator-name = "vreg_l17a_3p0";
395 regulator-min-microvolt = <2856000>;
396 regulator-max-microvolt = <3008000>;
397 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
401 regulator-name = "vreg_l18a_0p92";
402 regulator-min-microvolt = <800000>;
403 regulator-max-microvolt = <912000>;
404 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
408 regulator-name = "vreg_s5a_1p9";
409 regulator-min-microvolt = <1904000>;
410 regulator-max-microvolt = <2000000>;
411 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
415 regulator-name = "vreg_s6a_0p95";
416 regulator-min-microvolt = <920000>;
417 regulator-max-microvolt = <1128000>;
418 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
422 regulators-2 {
423 compatible = "qcom,pm8150l-rpmh-regulators";
424 qcom,pmic-id = "c";
426 vdd-s1-supply = <&vph_pwr>;
427 vdd-s2-supply = <&vph_pwr>;
428 vdd-s3-supply = <&vph_pwr>;
429 vdd-s4-supply = <&vph_pwr>;
430 vdd-s5-supply = <&vph_pwr>;
431 vdd-s6-supply = <&vph_pwr>;
432 vdd-s7-supply = <&vph_pwr>;
433 vdd-s8-supply = <&vph_pwr>;
434 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
435 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
436 vdd-l4-l5-l6-supply = <&vreg_bob>;
437 vdd-l7-l11-supply = <&vreg_bob>;
438 vdd-l9-l10-supply = <&vreg_bob>;
439 vdd-bob-supply = <&vph_pwr>;
442 regulator-name = "vreg_bob";
443 regulator-min-microvolt = <3008000>;
444 regulator-max-microvolt = <4000000>;
445 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
449 regulator-name = "vreg_l1c_1p8";
450 regulator-min-microvolt = <1800000>;
451 regulator-max-microvolt = <1800000>;
452 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
456 regulator-name = "vreg_l2c_1p2";
457 regulator-min-microvolt = <1200000>;
458 regulator-max-microvolt = <1200000>;
459 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
463 regulator-name = "vreg_l3c_0p8";
464 regulator-min-microvolt = <800000>;
465 regulator-max-microvolt = <800000>;
466 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
470 regulator-name = "vreg_l4c_1p7";
471 regulator-min-microvolt = <1704000>;
472 regulator-max-microvolt = <2928000>;
473 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
477 regulator-name = "vreg_l5c_1p8";
478 regulator-min-microvolt = <1800000>;
479 regulator-max-microvolt = <2928000>;
480 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
484 regulator-name = "vreg_l6c_2p96";
485 regulator-min-microvolt = <1800000>;
486 regulator-max-microvolt = <2960000>;
487 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
491 regulator-name = "vreg_l7c_cam_vcm0_2p85";
492 regulator-min-microvolt = <2856000>;
493 regulator-max-microvolt = <3104000>;
494 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
498 regulator-name = "vreg_l8c_1p8";
499 regulator-min-microvolt = <1800000>;
500 regulator-max-microvolt = <1800000>;
501 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
505 regulator-name = "vreg_l9c_2p96";
506 regulator-min-microvolt = <2704000>;
507 regulator-max-microvolt = <2960000>;
508 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
512 regulator-name = "vreg_l10c_3p0";
513 regulator-min-microvolt = <3000000>;
514 regulator-max-microvolt = <3000000>;
515 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
519 regulator-name = "vreg_l11c_3p3";
520 regulator-min-microvolt = <3296000>;
521 regulator-max-microvolt = <3296000>;
522 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
523 regulator-always-on;
527 regulator-name = "vreg_s8c_1p3";
528 regulator-min-microvolt = <1352000>;
529 regulator-max-microvolt = <1352000>;
530 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
537 firmware-name = "qcom/sm8250/cdsp.mbn";
547 zap-shader {
548 memory-region = <&gpu_mem>;
549 firmware-name = "qcom/sm8250/a650_zap.mbn";
553 /* LS-I2C0 */
560 clock-frequency = <400000>;
562 lt9611_codec: hdmi-bridge@2b {
565 #sound-dai-cells = <1>;
567 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
569 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
571 vdd-supply = <<9611_1v2>;
572 vcc-supply = <<9611_3v3>;
574 pinctrl-names = "default";
575 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
578 #address-cells = <1>;
579 #size-cells = <0>;
585 remote-endpoint = <&mdss_dsi0_out>;
594 remote-endpoint = <&mdss_dsi1_out>;
603 remote-endpoint = <&hdmi_con>;
611 /* LS-I2C1 */
615 typec-mux@1c {
619 vcc-supply = <&vreg_s4a_1p8>;
621 retimer-switch;
622 orientation-switch;
625 #address-cells = <1>;
626 #size-cells = <0>;
632 remote-endpoint = <&pm8150b_typec_mux_in>;
640 remote-endpoint = <&usb_1_qmpphy_out>;
641 data-lanes = <0 1 2 3>;
649 remote-endpoint = <&pm8150b_typec_sbu_out>;
665 data-lanes = <0 1>;
666 remote-endpoint = <&usb_1_qmpphy_dp_in>;
671 vdda-supply = <&vreg_l9a_1p2>;
674 qcom,dual-dsi-mode;
675 qcom,master-dsi;
681 remote-endpoint = <<9611_a>;
682 data-lanes = <0 1 2 3>;
690 vdds-supply = <&vreg_l5a_0p88>;
697 qcom,hw-settle-time = <200>;
704 qcom,hw-settle-time = <200>;
712 xo-therm@0 {
714 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
716 qcom,hw-settle-time-us = <200>;
719 wifi-therm@1 {
721 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
723 qcom,hw-settle-time-us = <200>;
733 vdda-phy-supply = <&vreg_l5a_0p88>;
734 vdda-pll-supply = <&vreg_l9a_1p2>;
743 vdda-phy-supply = <&vreg_l5a_0p88>;
744 vdda-pll-supply = <&vreg_l9a_1p2>;
753 vdda-phy-supply = <&vreg_l5a_0p88>;
754 vdda-pll-supply = <&vreg_l9a_1p2>;
758 gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
759 gpio-line-names =
762 "PM_GPIO-F",
776 qcom,hw-settle-time = <200>;
784 conn-therm@0 {
786 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
788 qcom,hw-settle-time-us = <200>;
793 gpio-line-names =
812 qcom,hw-settle-time = <200>;
819 qcom,hw-settle-time = <200>;
827 skin-msm-therm@0 {
829 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
831 qcom,hw-settle-time-us = <200>;
834 pm8150l-therm@1 {
836 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
838 qcom,hw-settle-time-us = <200>;
843 gpio-line-names =
849 "PM_GPIO-A", /* PWM */
853 "PM_GPIO-B",
857 lt9611_rst_pin: lt9611-rst-state {
861 output-high;
862 input-disable;
863 power-source = <0>;
870 #address-cells = <1>;
871 #size-cells = <0>;
877 function-enumerator = <3>;
879 linux,default-trigger = "heartbeat";
880 default-state = "on";
887 function-enumerator = <2>;
888 default-state = "on";
895 function-enumerator = <1>;
924 qcom,sd-lines = <0 1 2 3>;
932 qcom,sd-lines = <0>;
952 pinctrl-names = "default";
953 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
954 vmmc-supply = <&vreg_l9c_2p96>;
955 vqmmc-supply = <&vreg_l6c_2p96>;
956 cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
957 bus-width = <4>;
958 no-sdio;
959 no-mmc;
963 compatible = "qcom,qrb5165-rb5-sndcard";
964 pinctrl-0 = <&tert_mi2s_active>;
965 pinctrl-names = "default";
966 model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
967 audio-routing =
970 "VA DMIC0", "vdd-micb",
971 "VA DMIC1", "vdd-micb",
976 mm1-dai-link {
977 link-name = "MultiMedia1";
979 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
983 mm2-dai-link {
984 link-name = "MultiMedia2";
986 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
990 mm3-dai-link {
991 link-name = "MultiMedia3";
993 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
997 hdmi-dai-link {
998 link-name = "HDMI Playback";
1000 sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
1004 sound-dai = <&q6routing>;
1008 sound-dai = <<9611_codec 0>;
1012 dma-dai-link {
1013 link-name = "WSA Playback";
1015 sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
1019 sound-dai = <&q6routing>;
1023 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
1027 va-dai-link {
1028 link-name = "VA Capture";
1030 sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
1034 sound-dai = <&q6routing>;
1038 sound-dai = <&vamacro 0>;
1046 pinctrl-names = "default";
1047 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
1048 cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
1054 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
1055 spi-max-frequency = <10000000>;
1056 vdd-supply = <&vdc_5v>;
1057 xceiver-supply = <&vdc_5v>;
1067 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1068 #thermal-sensor-cells = <0>;
1069 sound-name-prefix = "SpkrLeft";
1070 #sound-dai-cells = <0>;
1076 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1077 #thermal-sensor-cells = <0>;
1078 sound-name-prefix = "SpkrRight";
1079 #sound-dai-cells = <0>;
1084 gpio-reserved-ranges = <40 4>;
1085 gpio-line-names =
1086 "GPIO-MM",
1087 "GPIO-NN",
1088 "GPIO-OO",
1089 "GPIO-PP",
1090 "GPIO-A",
1091 "GPIO-C",
1092 "GPIO-E",
1093 "GPIO-D",
1094 "I2C0-SDA",
1095 "I2C0-SCL",
1096 "GPIO-TT", /* GPIO_10 */
1100 "GPIO-X",
1108 "GPIO-AAA",
1109 "GPIO-BBB",
1110 "GPIO-CCC",
1111 "GPIO-Z",
1112 "GPIO-DDD",
1113 "GPIO-BB",
1118 "GPIO-UU",
1132 "GPIO-F",
1133 "GPIO-JJ",
1142 "GPIO-QQ",
1143 "GPIO-RR",
1150 "GPIO-AA",
1152 "GPIO-G",
1153 "GPIO-LL",
1164 "GPIO-II",
1168 "GPIO-CC",
1169 "GPIO-DD",
1170 "GPIO-EE",
1171 "GPIO-FF",
1172 "GPIO-GG",
1173 "GPIO-HH",
1174 "GPIO-VV",
1175 "GPIO-WW",
1178 "GPIO-K",
1179 "GPIO-I",
1184 "GPIO-AA", /* CSI4_MCLK */
1185 "GPIO-BB", /* CSI5_MCLK */
1186 "GPIO-KK", /* GPIO_100 */
1195 "GPIO-L",
1200 "GPIO-J",
1201 "GPIO-YY",
1202 "GPIO-H",
1203 "GPIO-ZZ",
1211 "GPIO-M",
1212 "GPIO-N",
1213 "GPIO-O",
1214 "GPIO-P",
1222 "GPIO-B",
1230 "GPIO-U",
1231 "GPIO-Y",
1232 "GPIO-R",
1233 "GPIO-Q",
1234 "GPIO-S",
1235 "GPIO-T",
1236 "GPIO-V", /* GPIO_150 */
1237 "GPIO-W",
1256 "GPIO-SS", /* GPIO_170 */
1257 "GPIO-XX",
1267 bt_en_state: bt-default-state {
1270 drive-strength = <16>;
1271 output-low;
1272 bias-pull-up;
1275 lt9611_irq_pin: lt9611-irq-state {
1278 bias-disable;
1281 sdc2_default_state: sdc2-default-state {
1282 clk-pins {
1284 bias-disable;
1285 drive-strength = <16>;
1288 cmd-pins {
1290 bias-pull-up;
1291 drive-strength = <10>;
1294 data-pins {
1296 bias-pull-up;
1297 drive-strength = <10>;
1301 sdc2_card_det_n: sd-card-det-n-state {
1304 bias-pull-up;
1312 compatible = "qcom,qca6390-bt";
1314 pinctrl-names = "default";
1315 pinctrl-0 = <&bt_en_state>;
1317 enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
1319 vddio-supply = <&vreg_s4a_1p8>;
1320 vddpmu-supply = <&vreg_s2f_0p95>;
1321 vddaon-supply = <&vreg_s6a_0p95>;
1322 vddrfa0p9-supply = <&vreg_s2f_0p95>;
1323 vddrfa1p3-supply = <&vreg_s8c_1p3>;
1324 vddrfa1p9-supply = <&vreg_s5a_1p9>;
1335 vcc-supply = <&vreg_l17a_3p0>;
1336 vcc-max-microamp = <800000>;
1337 vccq-supply = <&vreg_l6a_1p2>;
1338 vccq-max-microamp = <800000>;
1339 vccq2-supply = <&vreg_s4a_1p8>;
1340 vccq2-max-microamp = <800000>;
1346 vdda-phy-supply = <&vreg_l5a_0p88>;
1347 vdda-pll-supply = <&vreg_l9a_1p2>;
1356 usb-role-switch;
1360 remote-endpoint = <&pm8150b_role_switch_in>;
1366 vdda-pll-supply = <&vreg_l5a_0p88>;
1367 vdda33-supply = <&vreg_l2a_3p1>;
1368 vdda18-supply = <&vreg_l12a_1p8>;
1374 vdda-phy-supply = <&vreg_l9a_1p2>;
1375 vdda-pll-supply = <&vreg_l18a_0p92>;
1376 orientation-switch;
1380 remote-endpoint = <&redriver_phy_con_ss>;
1394 vdda-pll-supply = <&vreg_l5a_0p88>;
1395 vdda33-supply = <&vreg_l2a_3p1>;
1396 vdda18-supply = <&vreg_l12a_1p8>;
1402 vdda-phy-supply = <&vreg_l9a_1p2>;
1403 vdda-pll-supply = <&vreg_l18a_0p92>;
1407 pinctrl-0 = <&dmic01_active>;
1408 pinctrl-names = "default";
1409 vdd-micb-supply = <&vreg_s4a_1p8>;
1410 qcom,dmic-sample-rate = <600000>;
1421 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1423 drive-strength = <6>;
1424 bias-disable;
1428 drive-strength = <6>;
1429 bias-disable;
1433 regulator-min-microamp = <500000>;
1434 regulator-max-microamp = <3000000>;
1441 vdd-pdphy-supply = <&vreg_l2a_3p1>;
1444 compatible = "usb-c-connector";
1446 power-role = "source";
1447 data-role = "dual";
1448 self-powered;
1450 source-pdos = <PDO_FIXED(5000, 3000,
1463 #address-cells = <1>;
1464 #size-cells = <0>;
1469 remote-endpoint = <&usb_1_role_switch_out>;
1476 remote-endpoint = <&redriver_usb_con_ss>;
1484 remote-endpoint = <&redriver_usb_con_sbu>;
1492 remote-endpoint = <&mdss_dp_out>;