Lines Matching +full:vdd +full:- +full:1
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
14 compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
22 stdout-path = "serial0:115200n8";
26 clk40M: can-clk {
27 compatible = "fixed-clock";
28 clock-frequency = <40000000>;
29 #clock-cells = <0>;
33 gpio-keys {
34 compatible = "gpio-keys";
35 label = "gpio-keys";
37 pinctrl-0 = <&kypd_vol_up_n>;
38 pinctrl-names = "default";
40 key-volume-up {
44 debounce-interval = <15>;
45 linux,can-disable;
46 wakeup-source;
50 hdmi-connector {
51 compatible = "hdmi-connector";
56 remote-endpoint = <<9611_out>;
62 compatible = "gpio-leds";
64 led-bt {
69 linux,default-trigger = "bluetooth-power";
70 default-state = "off";
73 led-user0 {
78 linux,default-trigger = "none";
79 default-state = "off";
80 panic-indicator;
83 led-wlan {
88 linux,default-trigger = "phy0tx";
89 default-state = "off";
93 vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
94 compatible = "regulator-fixed";
95 regulator-name = "VREG_HDMI_OUT_1P2";
96 regulator-min-microvolt = <1200000>;
97 regulator-max-microvolt = <1200000>;
98 vin-supply = <&vdc_1v2>;
99 regulator-always-on;
100 regulator-boot-on;
103 lt9611_3v3: regulator-lt9611-3v3 {
104 compatible = "regulator-fixed";
105 regulator-name = "LT9611_3V3";
106 regulator-min-microvolt = <3300000>;
107 regulator-max-microvolt = <3300000>;
108 vin-supply = <&vdc_3v3>;
109 regulator-always-on;
110 regulator-boot-on;
114 vdc_12v: regulator-vdc-12v {
115 compatible = "regulator-fixed";
116 regulator-name = "DC_12V";
117 regulator-min-microvolt = <12000000>;
118 regulator-max-microvolt = <12000000>;
119 regulator-always-on;
120 regulator-boot-on;
124 vdc_1v2: regulator-vdc-1v2 {
125 compatible = "regulator-fixed";
126 regulator-name = "VDC_1V2";
127 regulator-min-microvolt = <1200000>;
128 regulator-max-microvolt = <1200000>;
129 vin-supply = <&vdc_12v>;
130 regulator-always-on;
131 regulator-boot-on;
135 vdc_3v3: regulator-vdc-3v3 {
136 compatible = "regulator-fixed";
137 regulator-name = "VDC_3V3";
138 regulator-min-microvolt = <3300000>;
139 regulator-max-microvolt = <3300000>;
140 vin-supply = <&vdc_12v>;
141 regulator-always-on;
142 regulator-boot-on;
146 vdc_5v: regulator-vdc-5v {
147 compatible = "regulator-fixed";
148 regulator-name = "VDC_5V";
150 regulator-min-microvolt = <5000000>;
151 regulator-max-microvolt = <5000000>;
152 regulator-always-on;
153 regulator-boot-on;
157 vdc_vbat_som: regulator-vdc-vbat {
158 compatible = "regulator-fixed";
159 regulator-name = "VBAT_SOM";
160 regulator-min-microvolt = <4200000>;
161 regulator-max-microvolt = <4200000>;
162 regulator-always-on;
163 regulator-boot-on;
167 vph_pwr: regulator-vph-pwr {
168 compatible = "regulator-fixed";
169 regulator-name = "vph_pwr";
170 regulator-min-microvolt = <3700000>;
171 regulator-max-microvolt = <3700000>;
172 vin-supply = <&vdc_vbat_som>;
174 regulator-always-on;
175 regulator-boot-on;
186 zap-shader {
187 firmware-name = "qcom/qrb4210/a610_zap.mbn";
192 clock-frequency = <400000>;
195 lt9611_codec: hdmi-bridge@2b {
198 interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
199 reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
201 vdd-supply = <&vreg_hdmi_out_1p2>;
202 vcc-supply = <<9611_3v3>;
204 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
205 pinctrl-names = "default";
206 #sound-dai-cells = <1>;
209 #address-cells = <1>;
210 #size-cells = <0>;
216 remote-endpoint = <&mdss_dsi0_out>;
224 remote-endpoint = <&hdmi_con>;
236 vdda-supply = <&vreg_l18a_1p232>;
241 remote-endpoint = <<9611_a>;
242 data-lanes = <0 1 2 3>;
250 kypd_vol_up_n: kypd-vol-up-n-state {
253 power-source = <0>;
254 bias-pull-up;
255 input-enable;
273 firmware-name = "qcom/qrb4210/adsp.mbn";
279 firmware-name = "qcom/qrb4210/cdsp.mbn";
285 firmware-name = "qcom/qrb4210/modem.mbn";
292 compatible = "qcom,rpm-pm6125-regulators";
294 vdd-s1-supply = <&vph_pwr>;
295 vdd-s2-supply = <&vph_pwr>;
296 vdd-s3-supply = <&vph_pwr>;
297 vdd-s4-supply = <&vph_pwr>;
298 vdd-s5-supply = <&vph_pwr>;
299 vdd-s6-supply = <&vph_pwr>;
300 vdd-s7-supply = <&vph_pwr>;
301 vdd-s8-supply = <&vph_pwr>;
302 vdd-s9-supply = <&vph_pwr>;
303 vdd-s10-supply = <&vph_pwr>;
305 vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
306 vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
307 vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
308 vdd-l6-l8-supply = <&vreg_s5a_0p848>;
309 vdd-l9-l11-supply = <&vreg_s7a_2p04>;
310 vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
311 vdd-l12-l16-supply = <&vreg_s7a_2p04>;
312 vdd-l23-l24-supply = <&vph_pwr>;
315 regulator-min-microvolt = <920000>;
316 regulator-max-microvolt = <1128000>;
320 regulator-min-microvolt = <304000>;
321 regulator-max-microvolt = <1456000>;
325 regulator-min-microvolt = <1280000>;
326 regulator-max-microvolt = <2080000>;
330 regulator-min-microvolt = <952000>;
331 regulator-max-microvolt = <1152000>;
335 regulator-min-microvolt = <488000>;
336 regulator-max-microvolt = <1000000>;
340 regulator-min-microvolt = <1648000>;
341 regulator-max-microvolt = <3056000>;
342 regulator-allow-set-load;
346 regulator-min-microvolt = <576000>;
347 regulator-max-microvolt = <656000>;
351 regulator-min-microvolt = <1200000>;
352 regulator-max-microvolt = <1304000>;
356 regulator-min-microvolt = <640000>;
357 regulator-max-microvolt = <640000>;
361 regulator-min-microvolt = <1800000>;
362 regulator-max-microvolt = <1800000>;
363 regulator-allow-set-load;
367 regulator-min-microvolt = <1704000>;
368 regulator-max-microvolt = <1904000>;
372 regulator-min-microvolt = <1704000>;
373 regulator-max-microvolt = <1952000>;
374 regulator-allow-set-load;
378 regulator-min-microvolt = <1624000>;
379 regulator-max-microvolt = <1984000>;
383 regulator-min-microvolt = <1504000>;
384 regulator-max-microvolt = <1952000>;
388 regulator-min-microvolt = <1704000>;
389 regulator-max-microvolt = <1904000>;
393 regulator-min-microvolt = <2920000>;
394 regulator-max-microvolt = <3232000>;
398 regulator-min-microvolt = <1704000>;
399 regulator-max-microvolt = <1904000>;
400 regulator-allow-set-load;
404 regulator-min-microvolt = <1152000>;
405 regulator-max-microvolt = <1384000>;
406 regulator-allow-set-load;
410 regulator-min-microvolt = <1104000>;
411 regulator-max-microvolt = <1312000>;
415 regulator-min-microvolt = <1624000>;
416 regulator-max-microvolt = <3304000>;
420 regulator-min-microvolt = <1624000>;
421 regulator-max-microvolt = <3304000>;
425 regulator-min-microvolt = <2400000>;
426 regulator-max-microvolt = <3600000>;
430 regulator-min-microvolt = <2952000>;
431 regulator-max-microvolt = <3304000>;
432 regulator-system-load = <100000>;
433 regulator-allow-set-load;
437 regulator-min-microvolt = <3312000>;
438 regulator-max-microvolt = <3312000>;
439 regulator-allow-set-load;
443 regulator-min-microvolt = <2704000>;
444 regulator-max-microvolt = <3600000>;
445 regulator-system-load = <100000>;
446 regulator-allow-set-load;
452 pinctrl-0 = <&sdc1_state_on>;
453 pinctrl-1 = <&sdc1_state_off>;
454 pinctrl-names = "default", "sleep";
456 vmmc-supply = <&vreg_l24a_2p96>;
457 vqmmc-supply = <&vreg_l11a_1p8>;
458 no-sdio;
459 non-removable;
465 cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
467 pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
468 pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
469 pinctrl-names = "default", "sleep";
471 vmmc-supply = <&vreg_l22a_2p96>;
472 vqmmc-supply = <&vreg_l5a_2p96>;
473 no-sdio;
484 interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
486 spi-max-frequency = <10000000>;
487 vdd-supply = <&vdc_5v>;
488 xceiver-supply = <&vdc_5v>;
493 clock-frequency = <32000>;
497 gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
498 <56 3>, <61 2>, <64 1>,
499 <68 1>, <72 8>, <96 1>;
501 uart3_default: uart3-default-state {
502 cts-pins {
505 drive-strength = <2>;
506 bias-bus-hold;
509 rts-pins {
512 drive-strength = <2>;
513 bias-disable;
516 tx-pins {
519 drive-strength = <2>;
520 bias-disable;
523 rx-pins {
526 drive-strength = <2>;
527 bias-pull-up;
531 uart3_sleep: uart3-sleep-state {
532 cts-pins {
535 drive-strength = <2>;
536 bias-bus-hold;
539 rts-pins {
542 drive-strength = <2>;
543 bias-pull-down;
546 tx-pins {
549 drive-strength = <2>;
550 bias-pull-up;
553 rx-pins {
556 drive-strength = <2>;
557 bias-pull-up;
561 lt9611_rst_pin: lt9611-rst-state {
564 input-disable;
565 output-high;
568 lt9611_irq_pin: lt9611-irq-state {
571 bias-disable;
574 sdc2_card_det_n: sd-card-det-n-state {
577 drive-strength = <2>;
578 bias-pull-up;
583 interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
585 pinctrl-0 = <&uart3_default>;
586 pinctrl-1 = <&uart3_sleep>;
587 pinctrl-names = "default", "sleep";
591 compatible = "qcom,wcn3988-bt";
593 vddio-supply = <&vreg_l9a_1p8>;
594 vddxo-supply = <&vreg_l16a_1p3>;
595 vddrf-supply = <&vreg_l17a_1p3>;
596 vddch0-supply = <&vreg_l23a_3p3>;
597 enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
598 max-speed = <3200000>;
611 maximum-speed = "super-speed";
615 vdd-supply = <&vreg_l4a_0p9>;
616 vdda-pll-supply = <&vreg_l12a_1p8>;
617 vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
623 vdda-phy-supply = <&vreg_l4a_0p9>;
624 vdda-pll-supply = <&vreg_l12a_1p8>;
630 vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
631 vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
632 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
633 vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
634 qcom,ath10k-calibration-variant = "Thundercomm_RB2";
640 clock-frequency = <19200000>;