Lines Matching +full:disable +full:- +full:state
1 // SPDX-License-Identifier: GPL-2.0-only
6 /dts-v1/;
8 #include "msm8916-pm8916.dtsi"
9 #include "msm8916-modem-qdsp6.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
24 * arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
30 chassis-type = "handset";
39 stdout-path = "serial0";
42 reserved-memory {
44 tz-apps@85500000 {
46 no-map;
50 gpio-keys {
51 compatible = "gpio-keys";
53 pinctrl-names = "default";
54 pinctrl-0 = <&gpio_keys_default>;
58 button-volume-up {
64 button-home {
71 gpio-hall-sensor {
72 compatible = "gpio-keys";
74 pinctrl-names = "default";
75 pinctrl-0 = <&gpio_hall_sensor_default>;
79 event-hall-sensor {
82 linux,input-type = <EV_SW>;
84 linux,can-disable;
88 reg_vdd_tsp: regulator-vdd-tsp {
89 compatible = "regulator-fixed";
90 regulator-name = "vdd_tsp";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
95 enable-active-high;
97 pinctrl-names = "default";
98 pinctrl-0 = <&tsp_en_default>;
101 reg_touch_key: regulator-touch-key {
102 compatible = "regulator-fixed";
103 regulator-name = "touch_key";
104 regulator-min-microvolt = <2800000>;
105 regulator-max-microvolt = <2800000>;
108 enable-active-high;
110 pinctrl-names = "default";
111 pinctrl-0 = <&tkey_en_default>;
114 reg_key_led: regulator-key-led {
115 compatible = "regulator-fixed";
116 regulator-name = "key_led";
117 regulator-min-microvolt = <3300000>;
118 regulator-max-microvolt = <3300000>;
121 enable-active-high;
123 pinctrl-names = "default";
124 pinctrl-0 = <&tkey_led_en_default>;
127 i2c-muic {
128 compatible = "i2c-gpio";
129 sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
130 scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&muic_i2c_default>;
135 #address-cells = <1>;
136 #size-cells = <0>;
139 compatible = "siliconmitus,sm5504-muic";
142 interrupt-parent = <&tlmm>;
145 pinctrl-names = "default";
146 pinctrl-0 = <&muic_irq_default>;
149 compatible = "usb-b-connector";
150 label = "micro-USB";
156 i2c-tkey {
157 compatible = "i2c-gpio";
158 sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
159 scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
161 pinctrl-names = "default";
162 pinctrl-0 = <&tkey_i2c_default>;
164 #address-cells = <1>;
165 #size-cells = <0>;
168 compatible = "coreriver,tc360-touchkey";
171 interrupt-parent = <&tlmm>;
174 vcc-supply = <®_touch_key>;
175 vdd-supply = <®_key_led>;
176 vddio-supply = <&pm8916_l6>;
180 pinctrl-names = "default";
181 pinctrl-0 = <&tkey_default>;
185 i2c-nfc {
186 compatible = "i2c-gpio";
187 sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
188 scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
190 pinctrl-names = "default";
191 pinctrl-0 = <&nfc_i2c_default>;
193 #address-cells = <1>;
194 #size-cells = <0>;
197 compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
200 interrupt-parent = <&tlmm>;
203 enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
204 firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
206 pinctrl-names = "default";
207 pinctrl-0 = <&nfc_default>;
212 compatible = "simple-battery";
213 precharge-current-microamp = <450000>;
214 constant-charge-current-max-microamp = <1000000>;
215 charge-term-current-microamp = <150000>;
216 precharge-upper-limit-microvolt = <3500000>;
217 constant-charge-voltage-max-microvolt = <4350000>;
228 interrupt-parent = <&tlmm>;
231 pinctrl-names = "default";
232 pinctrl-0 = <&imu_irq_default>;
239 mount-matrix = "0", "1", "0",
241 "0", "0", "-1";
248 fuel-gauge@35 {
249 compatible = "richtek,rt5033-battery";
252 interrupt-parent = <&tlmm>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&fg_alert_default>;
258 power-supplies = <&rt5033_charger>;
269 interrupt-parent = <&tlmm>;
272 touchscreen-size-x = <540>;
273 touchscreen-size-y = <960>;
275 vdd-supply = <®_vdd_tsp>;
276 vddo-supply = <&pm8916_l6>;
278 pinctrl-names = "default";
279 pinctrl-0 = <&tsp_irq_default>;
290 interrupt-parent = <&tlmm>;
293 pinctrl-names = "default";
294 pinctrl-0 = <&pmic_int_default>;
298 regulator-min-microvolt = <4900000>;
299 regulator-max-microvolt = <4900000>;
300 regulator-always-on;
303 regulator-min-microvolt = <2800000>;
304 regulator-max-microvolt = <2800000>;
307 regulator-min-microvolt = <1200000>;
308 regulator-max-microvolt = <1200000>;
313 compatible = "richtek,rt5033-charger";
314 monitored-battery = <&battery>;
315 richtek,usb-connector = <&usb_con>;
343 non-removable;
346 * FIXME: Disable UHS-I modes since tuning fails with:
349 * mmc1: tuning execution failed: -5
350 * mmc1: error -5 whilst initialising SD card
356 no-1-8-v;
360 audio-routing =
396 fg_alert_default: fg-alert-default-state {
400 drive-strength = <2>;
401 bias-disable;
404 gpio_keys_default: gpio-keys-default-state {
408 drive-strength = <2>;
409 bias-pull-up;
412 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
416 drive-strength = <2>;
417 bias-disable;
420 imu_irq_default: imu-irq-default-state {
424 drive-strength = <2>;
425 bias-disable;
428 muic_i2c_default: muic-i2c-default-state {
432 drive-strength = <2>;
433 bias-disable;
436 muic_irq_default: muic-irq-default-state {
440 drive-strength = <2>;
441 bias-disable;
444 nfc_default: nfc-default-state {
445 nfc-pins {
449 drive-strength = <2>;
450 bias-disable;
452 irq-pins {
456 drive-strength = <2>;
457 bias-pull-down;
461 nfc_i2c_default: nfc-i2c-default-state {
465 drive-strength = <2>;
466 bias-disable;
469 pmic_int_default: pmic-int-default-state {
473 drive-strength = <2>;
474 bias-disable;
477 tkey_default: tkey-default-state {
481 drive-strength = <2>;
482 bias-disable;
485 tkey_en_default: tkey-en-default-state {
489 drive-strength = <2>;
490 bias-disable;
493 tkey_i2c_default: tkey-i2c-default-state {
497 drive-strength = <2>;
498 bias-disable;
501 tkey_led_en_default: tkey-led-en-default-state {
505 drive-strength = <2>;
506 bias-disable;
509 tsp_en_default: tsp-en-default-state {
513 drive-strength = <2>;
514 bias-disable;
517 tsp_irq_default: tsp-irq-default-state {
521 drive-strength = <2>;
522 bias-disable;