Lines Matching +full:p2u +full:- +full:3
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/linux-event-codes.h>
5 #include <dt-bindings/input/gpio-keys.h>
7 #include "tegra234-p3701-0000.dtsi"
8 #include "tegra234-p3737-0000.dtsi"
12 compatible = "nvidia,p3737-0000+p3701-0000", "nvidia,p3701-0000", "nvidia,tegra234";
22 stdout-path = "serial0:115200n8";
27 compatible = "nvidia,tegra194-hsuart";
28 reset-names = "serial";
33 current-speed = <115200>;
38 assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
39 assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
54 usb2-0 {
58 usb2-1 {
62 usb2-2 {
66 usb2-3 {
74 usb3-0 {
78 usb3-1 {
82 usb3-2 {
90 usb2-0 {
92 usb-role-switch;
97 remote-endpoint = <&hs_ucsi_ccg_p1>;
102 usb2-1 {
108 remote-endpoint = <&hs_ucsi_ccg_p0>;
113 usb2-2 {
118 usb2-3 {
123 usb3-0 {
124 nvidia,usb2-companion = <1>;
129 remote-endpoint = <&ss_ucsi_ccg_p0>;
134 usb3-1 {
135 nvidia,usb2-companion = <0>;
140 remote-endpoint = <&ss_ucsi_ccg_p1>;
145 usb3-2 {
146 nvidia,usb2-companion = <3>;
155 phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
156 <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
157 phy-names = "usb2-0", "usb3-0";
163 phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
164 <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
165 <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
166 <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
167 <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
168 <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
169 <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
170 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
171 "usb3-0", "usb3-1", "usb3-2";
177 phy-handle = <&mgbe0_phy>;
178 phy-mode = "10gbase-r";
181 #address-cells = <1>;
182 #size-cells = <0>;
185 compatible = "ethernet-phy-ieee802.3-c45";
188 #phy-cells = <0>;
199 interrupt-parent = <&gpio>;
201 firmware-name = "nvidia,jetson-agx-xavier";
204 #address-cells = <1>;
205 #size-cells = <0>;
208 compatible = "usb-c-connector";
210 label = "USB-C";
211 data-role = "host";
214 #address-cells = <1>;
215 #size-cells = <0>;
221 remote-endpoint = <&hs_typec_p0>;
229 remote-endpoint = <&ss_typec_p0>;
236 compatible = "usb-c-connector";
238 label = "USB-C";
239 data-role = "dual";
242 #address-cells = <1>;
243 #size-cells = <0>;
249 remote-endpoint = <&hs_typec_p1>;
257 remote-endpoint = <&ss_typec_p1>;
268 vddio-pex-ctl-supply = <&vdd_1v8_ao>;
271 phy-names = "p2u-0";
277 vddio-pex-ctl-supply = <&vdd_1v8_ao>;
281 phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
287 vddio-pex-ctl-supply = <&vdd_1v8_ls>;
288 vpcie3v3-supply = <&vdd_3v3_pcie>;
289 vpcie12v-supply = <&vdd_12v_pcie>;
294 phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
295 "p2u-5", "p2u-6", "p2u-7";
298 pcie-ep@141a0000 {
301 vddio-pex-ctl-supply = <&vdd_1v8_ls>;
303 reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
305 nvidia,refclk-select-gpios = <&gpio_aon
312 phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
313 "p2u-5", "p2u-6", "p2u-7";
317 gpio-keys {
318 compatible = "gpio-keys";
321 key-force-recovery {
324 linux,input-type = <EV_KEY>;
328 key-power {
331 linux,input-type = <EV_KEY>;
333 wakeup-event-action = <EV_ACT_ASSERTED>;
334 wakeup-source;
337 key-suspend {
340 linux,input-type = <EV_KEY>;
345 pwm-fan {
346 cooling-levels = <66 215 255>;
354 compatible = "nvidia,tegra186-audio-graph-card";
414 widgets = "Microphone", "CVB-RT MIC Jack",
415 "Microphone", "CVB-RT MIC",
416 "Headphone", "CVB-RT HP Jack",
417 "Speaker", "CVB-RT SPK";
419 routing = /* I2S1 <-> RT5640 */
420 "CVB-RT AIF1 Playback", "I2S1 DAP-Playback",
421 "I2S1 DAP-Capture", "CVB-RT AIF1 Capture",
423 "CVB-RT HP Jack", "CVB-RT HPOL",
424 "CVB-RT HP Jack", "CVB-RT HPOR",
425 "CVB-RT IN1P", "CVB-RT MIC Jack",
426 "CVB-RT IN2P", "CVB-RT MIC Jack",
427 "CVB-RT SPK", "CVB-RT SPOLP",
428 "CVB-RT SPK", "CVB-RT SPORP",
429 "CVB-RT DMIC1", "CVB-RT MIC",
430 "CVB-RT DMIC2", "CVB-RT MIC";
433 thermal-zones {
434 tj-thermal {
435 cooling-maps {
436 map-active-0 {
437 cooling-device = <&fan 0 1>;
441 map-active-1 {
442 cooling-device = <&fan 1 2>;