Lines Matching +full:non +full:- +full:inverted

1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
3 /dts-v1/;
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include "armada-372x.dtsi"
9 	model = "GL.iNet GL-MV1000";
10 	compatible = "glinet,gl-mv1000", "marvell,armada3720";
13 		led-boot = &led_power;
14 		led-failsafe = &led_power;
15 		led-running = &led_power;
16 		led-upgrade = &led_power;
20 		stdout-path = "serial0:115200n8";
29 		compatible = "regulator-gpio";
30 		regulator-name = "vcc_sd1";
31 		regulator-min-microvolt = <1800000>;
32 		regulator-max-microvolt = <3300000>;
33 		regulator-boot-on;
35 		gpios-states = <0>;
38 		enable-active-high;
42 		compatible = "gpio-keys";
58 		compatible = "gpio-leds";
73 			default-state = "on";
83 		compatible = "jedec,spi-nor";
84 		spi-max-frequency = <104000000>;
85 		m25p,fast-read;
87 			compatible = "fixed-partitions";
88 			#address-cells = <1>;
89 			#size-cells = <1>;
97 				label = "u-boot-env";
104 				read-only;
110 				read-only;
122 	wp-inverted;
123 	bus-width = <4>;
124 	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
125 	marvell,pad-type = "sd";
126 	no-1-8-v;
127 	vqmmc-supply = <&vcc_sd_reg1>;
132 	bus-width = <8>;
133 	mmc-ddr-1_8v;
134 	mmc-hs400-1_8v;
135 	non-removable;
136 	no-sd;
137 	no-sdio;
138 	marvell,pad-type = "fixed-1-8v";
155 	switch0: ethernet-switch@1 {
161 		ports: ethernet-ports {
162 			#address-cells = <1>;
163 			#size-cells = <0>;
165 			ethernet-port@0 {
171 			ethernet-port@1 {
174 				phy-handle = <&switch0phy0>;
177 			ethernet-port@2 {
180 				phy-handle = <&switch0phy1>;
182 				nvmem-cells = <&macaddr_factory_6>;
183 				nvmem-cell-names = "mac-address";
186 			ethernet-port@3 {
189 				phy-handle = <&switch0phy2>;
191 				nvmem-cells = <&macaddr_factory_6>;
192 				nvmem-cell-names = "mac-address";
197 			#address-cells = <1>;
198 			#size-cells = <0>;
200 			switch0phy0: ethernet-phy@11 {
203 			switch0phy1: ethernet-phy@12 {
206 			switch0phy2: ethernet-phy@13 {
214 	nvmem-cells = <&macaddr_factory_0>;
215 	nvmem-cell-names = "mac-address";
216 	phy-mode = "rgmii-id";
219 	fixed-link {
221 		full-duplex;
226 	compatible = "nvmem-cells";
227 	#address-cells = <1>;
228 	#size-cells = <1>;