Lines Matching +full:xceiver +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
9 #include <dt-bindings/net/ti-dp83867.h>
18 stdout-path = &uart2;
21 reg_usb0_host_vbus: regulator-usb0-vbus {
22 compatible = "regulator-fixed";
23 regulator-name = "usb0_host_vbus";
24 pinctrl-names = "default";
25 pinctrl-0 = <&pinctrl_usb0_vbus>;
26 regulator-min-microvolt = <5000000>;
27 regulator-max-microvolt = <5000000>;
29 enable-active-high;
32 reg_usb1_host_vbus: regulator-usb1-vbus {
33 compatible = "regulator-fixed";
34 regulator-name = "usb1_host_vbus";
35 pinctrl-names = "default";
36 pinctrl-0 = <&pinctrl_usb1_vbus>;
37 regulator-min-microvolt = <5000000>;
38 regulator-max-microvolt = <5000000>;
40 enable-active-high;
43 reg_usdhc2_vmmc: regulator-usdhc2 {
44 compatible = "regulator-fixed";
45 pinctrl-names = "default";
46 pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
47 regulator-name = "VSD_3V3";
48 regulator-min-microvolt = <3300000>;
49 regulator-max-microvolt = <3300000>;
51 enable-active-high;
52 startup-delay-us = <100>;
53 off-on-delay-us = <12000>;
56 reg_flexcan1_xceiver: regulator-flexcan1 {
57 compatible = "regulator-fixed";
58 regulator-name = "flexcan1-xceiver";
59 regulator-min-microvolt = <3300000>;
60 regulator-max-microvolt = <3300000>;
63 reg_flexcan2_xceiver: regulator-flexcan2 {
64 compatible = "regulator-fixed";
65 regulator-name = "flexcan2-xceiver";
66 regulator-min-microvolt = <3300000>;
67 regulator-max-microvolt = <3300000>;
70 lcd0_backlight: backlight-0 {
71 compatible = "pwm-backlight";
72 pinctrl-names = "default";
73 pinctrl-0 = <&pinctrl_lcd0_backlight>;
75 brightness-levels = <0 255>;
76 num-interpolated-steps = <255>;
77 default-brightness-level = <255>;
78 enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
82 lcd1_backlight: backlight-1 {
83 compatible = "pwm-backlight";
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_lcd1_backlight>;
87 brightness-levels = <0 255>;
88 num-interpolated-steps = <255>;
89 default-brightness-level = <255>;
90 enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
95 compatible = "gpio-leds";
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_leds>;
100 led-sw {
101 label = "sw-led";
103 default-state = "off";
104 linux,default-trigger = "heartbeat";
108 extcon_usb0: extcon-usb0 {
109 compatible = "linux,extcon-usb-gpio";
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_usb0_extcon>;
112 id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
117 cpu-supply = <&vcc_arm>;
121 cpu-supply = <&vcc_arm>;
125 cpu-supply = <&vcc_arm>;
129 cpu-supply = <&vcc_arm>;
133 #address-cells = <1>;
134 #size-cells = <0>;
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_ecspi1>;
137 cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
141 #address-cells = <1>;
142 #size-cells = <0>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_ecspi2>;
145 cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&pinctrl_eqos>;
151 phy-mode = "rgmii-id";
152 phy-handle = <ðphy0>;
156 compatible = "snps,dwmac-mdio";
157 #address-cells = <1>;
158 #size-cells = <0>;
160 ethphy0: ethernet-phy@1 {
161 compatible = "ethernet-phy-ieee802.3-c22";
163 eee-broken-1000t;
164 reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>;
165 reset-assert-us = <1000>;
166 reset-deassert-us = <1000>;
167 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
168 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
169 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
170 ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
176 pinctrl-names = "default";
177 pinctrl-0 = <&pinctrl_fec>;
178 phy-mode = "rgmii-id";
179 phy-handle = <ðphy1>;
180 fsl,magic-packet;
184 #address-cells = <1>;
185 #size-cells = <0>;
187 ethphy1: ethernet-phy@1 {
188 compatible = "ethernet-phy-ieee802.3-c22";
190 eee-broken-1000t;
191 reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>;
192 reset-assert-us = <1000>;
193 reset-deassert-us = <1000>;
194 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
195 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
196 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
197 ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_i2c1>;
205 clock-frequency = <400000>;
216 pinctrl-names = "default";
217 pinctrl-0 = <&pinctrl_i2c2>;
218 clock-frequency = <400000>;
223 pinctrl-names = "default";
224 pinctrl-0 = <&pinctrl_i2c3>;
225 clock-frequency = <400000>;
230 pinctrl-names = "default";
231 pinctrl-0 = <&pinctrl_i2c4>;
232 clock-frequency = <400000>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&pinctrl_i2c5>;
239 clock-frequency = <400000>;
244 pinctrl-names = "default";
245 pinctrl-0 = <&pinctrl_i2c6>;
246 clock-frequency = <400000>;
252 pinctrl-names = "default";
253 pinctrl-0 = <&pinctrl_tca6424>;
254 gpio-controller;
255 #gpio-cells = <2>;
256 gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#",
262 interrupt-parent = <&gpio1>;
264 interrupt-controller;
265 #interrupt-cells = <2>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_lvds_bridge>;
273 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
280 interrupt-parent = <&tca6424>;
285 regulator-name = "VCC_SOC";
286 regulator-always-on;
287 regulator-min-microvolt = <950000>;
288 regulator-max-microvolt = <950000>;
292 regulator-name = "VCC_DRAM";
293 regulator-always-on;
294 regulator-min-microvolt = <1100000>;
295 regulator-max-microvolt = <1100000>;
299 regulator-name = "VCC_ARM";
300 regulator-always-on;
301 regulator-min-microvolt = <950000>;
302 regulator-max-microvolt = <950000>;
306 regulator-name = "VCC_1V8";
307 regulator-always-on;
308 regulator-min-microvolt = <1800000>;
309 regulator-max-microvolt = <1800000>;
313 regulator-name = "VCC_LDO1_2V5";
314 regulator-always-on;
315 regulator-min-microvolt = <2500000>;
316 regulator-max-microvolt = <2500000>;
320 regulator-name = "VCC_LDO2_1V8";
321 regulator-always-on;
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <1800000>;
327 regulator-name = "VCC_ETH_2V5";
328 regulator-always-on;
329 regulator-min-microvolt = <2500000>;
330 regulator-max-microvolt = <2500000>;
334 regulator-name = "VCC_DDR4_2V5";
335 regulator-always-on;
336 regulator-min-microvolt = <2500000>;
337 regulator-max-microvolt = <2500000>;
341 regulator-name = "VCC_LDO5_1V8";
342 regulator-always-on;
343 regulator-min-microvolt = <1800000>;
344 regulator-max-microvolt = <1800000>;
348 regulator-name = "VCC_SNVS_1V8";
349 regulator-always-on;
350 regulator-min-microvolt = <1800000>;
351 regulator-max-microvolt = <1800000>;
355 regulator-name = "VCC_SNVS_3V3";
356 regulator-always-on;
357 regulator-min-microvolt = <3300000>;
358 regulator-max-microvolt = <3300000>;
366 interrupt-parent = <&tca6424>;
370 tmp_sensor: temperature-sensor@71 {
377 pinctrl-names = "default";
378 pinctrl-0 = <&pinctrl_flexcan1>;
379 xceiver-supply = <®_flexcan1_xceiver>;
384 pinctrl-names = "default";
385 pinctrl-0 = <&pinctrl_flexcan2>;
386 xceiver-supply = <®_flexcan2_xceiver>;
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_flexspi0>;
396 compatible = "jedec,spi-nor";
398 #address-cells = <1>;
399 #size-cells = <1>;
400 spi-max-frequency = <80000000>;
401 spi-tx-bus-width = <4>;
402 spi-rx-bus-width = <4>;
407 pinctrl-names = "default";
408 pinctrl-0 = <&pinctrl_pwm1>;
413 pinctrl-names = "default";
414 pinctrl-0 = <&pinctrl_pwm2>;
419 pinctrl-names = "default";
420 pinctrl-0 = <&pinctrl_pwm3>;
425 pinctrl-names = "default";
426 pinctrl-0 = <&pinctrl_pwm4>;
435 pinctrl-names = "default";
436 pinctrl-0 = <&pinctrl_uart1>;
441 pinctrl-names = "default";
442 pinctrl-0 = <&pinctrl_uart2>;
443 uart-has-rtscts;
448 pinctrl-names = "default";
449 pinctrl-0 = <&pinctrl_uart3>;
450 uart-has-rtscts;
455 pinctrl-names = "default";
456 pinctrl-0 = <&pinctrl_uart4>;
461 vbus-supply = <®_usb0_host_vbus>;
466 vbus-supply = <®_usb1_host_vbus>;
480 hnp-disable;
481 srp-disable;
482 adp-disable;
493 assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
494 assigned-clock-rates = <400000000>;
495 pinctrl-names = "default", "state_100mhz", "state_200mhz";
496 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
497 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
498 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
499 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
500 wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
501 bus-width = <4>;
502 vmmc-supply = <®_usdhc2_vmmc>;
507 assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
508 assigned-clock-rates = <400000000>;
509 pinctrl-names = "default", "state_100mhz", "state_200mhz";
510 pinctrl-0 = <&pinctrl_usdhc3>;
511 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
512 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
513 bus-width = <8>;
514 non-removable;
519 pinctrl-names = "default";
520 pinctrl-0 = <&pinctrl_wdog>;
521 fsl,ext-reset-output;
639 pinctrl_lcd0_backlight: lcd0-backlightgrp {
644 pinctrl_lcd1_backlight: lcd1-backlightgrp {
654 pinctrl_lvds_bridge: lvds-bridgegrp {
712 pinctrl_usb0_extcon: usb0-extcongrp {
717 pinctrl_usb0_vbus: usb0-vbusgrp {
722 pinctrl_usb1_vbus: usb1-vbusgrp {
727 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
744 pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
749 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
760 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
786 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
801 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {