Lines Matching +full:buck4 +full:- +full:supply

1 // SPDX-License-Identifier: GPL-2.0+
7 /dts-v1/;
10 #include "imx8mn-bsh-smm-s2-display.dtsi"
14 stdout-path = &uart4;
17 fec_supply: fec-supply-en {
18 compatible = "regulator-fixed";
19 vin-supply = <&buck4_reg>;
20 regulator-name = "tja1101_en";
21 regulator-min-microvolt = <3300000>;
22 regulator-max-microvolt = <3300000>;
24 enable-active-high;
27 usdhc2_pwrseq: usdhc2-pwrseq {
28 compatible = "mmc-pwrseq-simple";
29 pinctrl-names = "default";
30 pinctrl-0 = <&pinctrl_usdhc2_pwrseq>;
31 reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
36 cpu-supply = <&buck2_reg>;
40 cpu-supply = <&buck2_reg>;
44 cpu-supply = <&buck2_reg>;
48 cpu-supply = <&buck2_reg>;
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_espi2>;
58 pinctrl-names = "default";
59 pinctrl-0 = <&pinctrl_fec1>;
60 phy-mode = "rmii";
61 phy-handle = <&ethphy0>;
62 phy-supply = <&fec_supply>;
63 fsl,magic-packet;
67 #address-cells = <1>;
68 #size-cells = <0>;
70 ethphy0: ethernet-phy@0 {
71 compatible = "ethernet-phy-ieee802.3-c22";
73 reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
74 reset-assert-us = <20>;
75 reset-deassert-us = <2000>;
81 clock-frequency = <400000>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_i2c1>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_pmic>;
91 interrupt-parent = <&gpio1>;
93 rohm,reset-snvs-powered;
95 #clock-cells = <0>;
97 clock-output-names = "clk-32k-out";
101 /* PMIC_BUCK1 - VDD_SOC */
102 regulator-name = "buck1";
103 regulator-min-microvolt = <700000>;
104 regulator-max-microvolt = <1300000>;
105 regulator-boot-on;
106 regulator-always-on;
107 regulator-ramp-delay = <1250>;
111 /* PMIC_BUCK2 - VDD_ARM */
112 regulator-name = "buck2";
113 regulator-min-microvolt = <700000>;
114 regulator-max-microvolt = <1300000>;
115 regulator-boot-on;
116 regulator-always-on;
117 regulator-ramp-delay = <1250>;
121 /* PMIC_BUCK5 - VDD_DRAM_VPU_GPU */
122 regulator-name = "buck3";
123 regulator-min-microvolt = <700000>;
124 regulator-max-microvolt = <1350000>;
125 regulator-boot-on;
126 regulator-always-on;
129 buck4_reg: BUCK4 {
130 /* PMIC_BUCK6 - VDD_3V3 */
131 regulator-name = "buck4";
132 regulator-min-microvolt = <3000000>;
133 regulator-max-microvolt = <3300000>;
134 regulator-boot-on;
135 regulator-always-on;
139 /* PMIC_BUCK7 - VDD_1V8 */
140 regulator-name = "buck5";
141 regulator-min-microvolt = <1605000>;
142 regulator-max-microvolt = <1995000>;
143 regulator-boot-on;
144 regulator-always-on;
148 /* PMIC_BUCK8 - NVCC_DRAM */
149 regulator-name = "buck6";
150 regulator-min-microvolt = <800000>;
151 regulator-max-microvolt = <1400000>;
152 regulator-boot-on;
153 regulator-always-on;
157 /* PMIC_LDO1 - NVCC_SNVS_1V8 */
158 regulator-name = "ldo1";
159 regulator-min-microvolt = <1600000>;
160 regulator-max-microvolt = <1900000>;
161 regulator-boot-on;
162 regulator-always-on;
166 /* PMIC_LDO2 - VDD_SNVS_0V8 */
167 regulator-name = "ldo2";
168 regulator-min-microvolt = <800000>;
169 regulator-max-microvolt = <900000>;
170 regulator-boot-on;
171 regulator-always-on;
175 /* PMIC_LDO3 - VDDA_1V8 */
176 regulator-name = "ldo3";
177 regulator-min-microvolt = <1800000>;
178 regulator-max-microvolt = <3300000>;
179 regulator-boot-on;
180 regulator-always-on;
184 /* PMIC_LDO4 - VDD_MIPI_0V9 */
185 regulator-name = "ldo4";
186 regulator-min-microvolt = <900000>;
187 regulator-max-microvolt = <1800000>;
188 regulator-boot-on;
189 regulator-always-on;
193 /* PMIC_LDO6 - VDD_MIPI_1V2 */
194 regulator-name = "ldo6";
195 regulator-min-microvolt = <900000>;
196 regulator-max-microvolt = <1800000>;
197 regulator-boot-on;
198 regulator-always-on;
205 clock-frequency = <400000>;
206 pinctrl-names = "default";
207 pinctrl-0 = <&pinctrl_i2c3>;
212 clock-frequency = <400000>;
213 pinctrl-names = "default";
214 pinctrl-0 = <&pinctrl_i2c4>;
219 pinctrl-names = "default";
220 pinctrl-0 = <&pinctrl_uart2>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&pinctrl_uart3>;
227 assigned-clocks = <&clk IMX8MN_CLK_UART3>;
228 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
229 uart-has-rtscts;
233 compatible = "brcm,bcm43438-bt";
234 pinctrl-names = "default";
235 pinctrl-0 = <&pinctrl_bluetooth>;
236 shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
237 device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
238 host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
239 max-speed = <3000000>;
245 pinctrl-names = "default";
246 pinctrl-0 = <&pinctrl_uart4>;
252 disable-over-current;
257 #address-cells = <1>;
258 #size-cells = <0>;
259 pinctrl-names = "default", "state_100mhz", "state_200mhz";
260 pinctrl-0 = <&pinctrl_usdhc2>;
261 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
262 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
263 mmc-pwrseq = <&usdhc2_pwrseq>;
264 bus-width = <4>;
265 non-removable;
269 compatible = "brcm,bcm4329-fmac";
271 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_wlan>;
273 interrupt-parent = <&gpio1>;
275 interrupt-names = "host-wake";
280 pinctrl-names = "default";
281 pinctrl-0 = <&pinctrl_wdog>;
282 fsl,ext-reset-output;
317 MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x150 /* RMII_INT - ENET_INT */
318 MX8MN_IOMUXC_SD2_WP_GPIO2_IO20 0x150 /* RMII_EN - ENET_EN */
319 MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x016 /* RMII_WAKE - GPIO_ENET_WAKE */
320 MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x016 /* RMII_RESET - GPIO_ENET_RST */
385 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
396 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
421 MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x0d6 /* GPIO_0 - WIFI_GPIO_0 */
422 MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x0d6 /* GPIO_1 - WIFI_GPIO_1 */
423 MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x0d6 /* BT_GPIO_5 - WIFI_GPIO_5 */
424 MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x0d6 /* I2S_CLK - WIFI_GPIO_6 */