Lines Matching +full:lx2160a +full:- +full:fspi

1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
5 // Copyright 2018-2020 NXP
7 /dts-v1/;
9 #include "fsl-lx2160a.dtsi"
13 	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
23 		stdout-path = "serial0:115200n8";
26 	sb_3v3: regulator-sb3v3 {
27 		compatible = "regulator-fixed";
28 		regulator-name = "MC34717-3.3VSB";
29 		regulator-min-microvolt = <3300000>;
30 		regulator-max-microvolt = <3300000>;
31 		regulator-boot-on;
32 		regulator-always-on;
41 	phy-handle = <&aquantia_phy1>;
42 	phy-connection-type = "usxgmii";
43 	managed = "in-band-status";
47 	phy-handle = <&aquantia_phy2>;
48 	phy-connection-type = "usxgmii";
49 	managed = "in-band-status";
53 	phy-handle = <&inphi_phy>;
57 	phy-handle = <&inphi_phy>;
61 	phy-handle = <&rgmii_phy1>;
62 	phy-connection-type = "rgmii-id";
66 	phy-handle = <&rgmii_phy2>;
67 	phy-connection-type = "rgmii-id";
73 	rgmii_phy1: ethernet-phy@1 {
75 		compatible = "ethernet-phy-id004d.d072";
76 		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
78 		eee-broken-1000t;
81 	rgmii_phy2: ethernet-phy@2 {
83 		compatible = "ethernet-phy-id004d.d072";
84 		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
86 		eee-broken-1000t;
89 	aquantia_phy1: ethernet-phy@4 {
91 		compatible = "ethernet-phy-ieee802.3-c45";
92 		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
96 	aquantia_phy2: ethernet-phy@5 {
98 		compatible = "ethernet-phy-ieee802.3-c45";
99 		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
107 	can-transceiver {
108 		max-bitrate = <5000000>;
115 	can-transceiver {
116 		max-bitrate = <5000000>;
123 	inphi_phy: ethernet-phy@0 {
124 		compatible = "ethernet-phy-id0210.7440";
130 	sd-uhs-sdr104;
131 	sd-uhs-sdr50;
132 	sd-uhs-sdr25;
133 	sd-uhs-sdr12;
138 	mmc-hs200-1_8v;
139 	mmc-hs400-1_8v;
140 	bus-width = <8>;
144 &fspi {
148 		#address-cells = <1>;
149 		#size-cells = <1>;
150 		compatible = "jedec,spi-nor";
151 		m25p,fast-read;
152 		spi-max-frequency = <50000000>;
154 		spi-rx-bus-width = <8>;
155 		spi-tx-bus-width = <8>;
159 		#address-cells = <1>;
160 		#size-cells = <1>;
161 		compatible = "jedec,spi-nor";
162 		m25p,fast-read;
163 		spi-max-frequency = <50000000>;
165 		spi-rx-bus-width = <8>;
166 		spi-tx-bus-width = <8>;
173 	i2c-mux@77 {
176 		#address-cells = <1>;
177 		#size-cells = <0>;
180 			#address-cells = <1>;
181 			#size-cells = <0>;
184 			power-monitor@40 {
187 				shunt-resistor = <500>;
192 			#address-cells = <1>;
193 			#size-cells = <0>;
196 			temperature-sensor@4c {
199 				vcc-supply = <&sb_3v3>;
202 			temperature-sensor@4d {
205 				vcc-supply = <&sb_3v3>;
217 		/* IRQ_RTC_B -> IRQ08, active low */
218 		interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;