Lines Matching +full:in +full:- +full:band

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4  * Based on fsl-ls1088a-rdb.dts
5  * Copyright 2017-2020 NXP
6  * Copyright 2019-2021 Traverse Technologies
11 /dts-v1/;
13 #include "fsl-ls1088a.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/input.h>
28 		stdout-path = "serial0:115200n8";
32 		compatible = "gpio-keys";
38 		button-powerdn {
45 		button-admin {
53 		compatible = "gpio-leds";
55 		led-0 {
60 		led-1 {
65 		led-2 {
71 	sfp_xg0: dpmac2-sfp {
73 		i2c-bus = <&sfplower_i2c>;
74 		tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
75 		tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
76 		mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
77 		los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
78 		maximum-power-milliwatt = <2000>;
81 	sfp_xg1: dpmac1-sfp {
83 		i2c-bus = <&sfpupper_i2c>;
84 		tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
85 		tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
86 		mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
87 		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
88 		maximum-power-milliwatt = <2000>;
92 /* XG1 - Upper SFP */
95 	pcs-handle = <&pcs1>;
96 	phy-connection-type = "10gbase-r";
97 	managed = "in-band-status";
100 /* XG0 - Lower SFP */
103 	pcs-handle = <&pcs2>;
104 	phy-connection-type = "10gbase-r";
105 	managed = "in-band-status";
110 	phy-handle = <&mdio1_phy5>;
111 	phy-connection-type = "qsgmii";
112 	managed = "in-band-status";
113 	pcs-handle = <&pcs3_0>;
117 	phy-handle = <&mdio1_phy6>;
118 	phy-connection-type = "qsgmii";
119 	managed = "in-band-status";
120 	pcs-handle = <&pcs3_1>;
124 	phy-handle = <&mdio1_phy7>;
125 	phy-connection-type = "qsgmii";
126 	managed = "in-band-status";
127 	pcs-handle = <&pcs3_2>;
131 	phy-handle = <&mdio1_phy8>;
132 	phy-connection-type = "qsgmii";
133 	managed = "in-band-status";
134 	pcs-handle = <&pcs3_3>;
139 	phy-handle = <&mdio1_phy1>;
140 	phy-connection-type = "qsgmii";
141 	managed = "in-band-status";
142 	pcs-handle = <&pcs7_0>;
146 	phy-handle = <&mdio1_phy2>;
147 	phy-connection-type = "qsgmii";
148 	managed = "in-band-status";
149 	pcs-handle = <&pcs7_1>;
153 	phy-handle = <&mdio1_phy3>;
154 	phy-connection-type = "qsgmii";
155 	managed = "in-band-status";
156 	pcs-handle = <&pcs7_2>;
160 	phy-handle = <&mdio1_phy4>;
161 	phy-connection-type = "qsgmii";
162 	managed = "in-band-status";
163 	pcs-handle = <&pcs7_3>;
177 	mdio1_phy5: ethernet-phy@c {
181 	mdio1_phy6: ethernet-phy@d {
185 	mdio1_phy7: ethernet-phy@e {
189 	mdio1_phy8: ethernet-phy@f {
193 	mdio1_phy1: ethernet-phy@1c {
197 	mdio1_phy2: ethernet-phy@1d {
201 	mdio1_phy3: ethernet-phy@1e {
205 	mdio1_phy4: ethernet-phy@1f {
220 		#gpio-cells = <2>;
221 		gpio-controller;
224 			gpio-hog;
226 			output-low;
248 	i2c-mux@70 {
250 		#address-cells = <1>;
251 		#size-cells = <0>;
255 			#address-cells = <1>;
256 			#size-cells = <0>;
261 			#address-cells = <1>;
262 			#size-cells = <0>;
288 		compatible = "jedec,spi-nor";
289 		#address-cells = <1>;
290 		#size-cells = <1>;
292 		spi-max-frequency = <20000000>;
293 		spi-rx-bus-width = <4>;
294 		spi-tx-bus-width = <4>;
297 			compatible = "fixed-partitions";
298 			#address-cells = <1>;
299 			#size-cells = <1>;
339 		compatible = "spi-nand";
340 		#address-cells = <1>;
341 		#size-cells = <1>;
343 		spi-max-frequency = <20000000>;
344 		spi-rx-bus-width = <4>;
345 		spi-tx-bus-width = <4>;
348 			compatible = "fixed-partitions";
349 			#address-cells = <1>;
350 			#size-cells = <1>;
356 				label = "nand-boot-reserved";
366 			/* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */