Lines Matching +full:pwrseq +full:- +full:simple

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-gxl-s905x.dtsi"
13 	compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
22 		stdout-path = "serial0:115200n8";
30 	vddio_card: gpio-regulator {
31 		compatible = "regulator-gpio";
33 		regulator-name = "VDDIO_CARD";
34 		regulator-min-microvolt = <1800000>;
35 		regulator-max-microvolt = <3300000>;
38 		gpios-states = <1>;
45 	vddio_boot: regulator-vddio_boot {
46 		compatible = "regulator-fixed";
47 		regulator-name = "VDDIO_BOOT";
48 		regulator-min-microvolt = <1800000>;
49 		regulator-max-microvolt = <1800000>;
52 	vddao_3v3: regulator-vddao_3v3 {
53 		compatible = "regulator-fixed";
54 		regulator-name = "VDDAO_3V3";
55 		regulator-min-microvolt = <3300000>;
56 		regulator-max-microvolt = <3300000>;
59 	vcc_3v3: regulator-vcc_3v3 {
60 		compatible = "regulator-fixed";
61 		regulator-name = "VCC_3V3";
62 		regulator-min-microvolt = <3300000>;
63 		regulator-max-microvolt = <3300000>;
66 	emmc_pwrseq: emmc-pwrseq {
67 		compatible = "mmc-pwrseq-emmc";
68 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
72 		compatible = "pwm-clock";
73 		#clock-cells = <0>;
74 		clock-frequency = <32768>;
78 	sdio_pwrseq: sdio-pwrseq {
79 		compatible = "mmc-pwrseq-simple";
80 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
82 		clock-names = "ext_clock";
85 	cvbs-connector {
86 		compatible = "composite-video-connector";
90 				remote-endpoint = <&cvbs_vdac_out>;
98 		remote-endpoint = <&cvbs_connector_in>;
104 	phy-mode = "rmii";
105 	phy-handle = <&internal_phy>;
110 	pinctrl-0 = <&remote_input_ao_pins>;
111 	pinctrl-names = "default";
116 	pinctrl-0 = <&pwm_e_pins>;
117 	pinctrl-names = "default";
119 	clock-names = "clkin0";
125 	pinctrl-0 = <&sdcard_pins>;
126 	pinctrl-1 = <&sdcard_clk_gate_pins>;
127 	pinctrl-names = "default", "clk-gate";
129 	bus-width = <4>;
130 	cap-sd-highspeed;
131 	max-frequency = <100000000>;
132 	disable-wp;
134 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
136 	vmmc-supply = <&vddao_3v3>;
137 	vqmmc-supply = <&vddio_card>;
143 	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
144 	pinctrl-1 = <&emmc_clk_gate_pins>;
145 	pinctrl-names = "default", "clk-gate";
147 	bus-width = <8>;
148 	cap-mmc-highspeed;
149 	max-frequency = <100000000>;
150 	non-removable;
151 	disable-wp;
152 	mmc-ddr-1_8v;
153 	mmc-hs200-1_8v;
155 	mmc-pwrseq = <&emmc_pwrseq>;
156 	vmmc-supply = <&vcc_3v3>;
157 	vqmmc-supply = <&vddio_boot>;
162 	pinctrl-0 = <&uart_ao_a_pins>;
163 	pinctrl-names = "default";