Lines Matching +full:hdmi +full:- +full:phy
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 // Based on sun50i-a64-pine64.dts, which is:
6 /dts-v1/;
8 #include "sun50i-a64-sopine.dtsi"
12 compatible = "pine64,sopine-baseboard", "pine64,sopine",
13 "allwinner,sun50i-a64";
25 stdout-path = "serial0:115200n8";
28 hdmi-connector {
29 compatible = "hdmi-connector";
34 remote-endpoint = <&hdmi_out_con>;
40 compatible = "regulator-fixed";
41 regulator-name = "vcc1v8";
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
80 pinctrl-names = "default";
81 pinctrl-0 = <&rgmii_pins>;
82 phy-mode = "rgmii-txid";
83 phy-handle = <&ext_rgmii_phy>;
84 phy-supply = <®_dc1sw>;
88 &hdmi {
89 hvcc-supply = <®_dldo1>;
95 remote-endpoint = <&hdmi_con_in>;
100 ext_rgmii_phy: ethernet-phy@1 {
101 compatible = "ethernet-phy-ieee802.3-c22";
107 pinctrl-names = "default";
108 pinctrl-0 = <&mmc2_pins>;
109 vmmc-supply = <®_dcdc1>;
110 vqmmc-supply = <®_vcc1v8>;
111 bus-width = <8>;
112 non-removable;
113 cap-mmc-hw-reset;
114 mmc-hs200-1_8v;
128 * Ethernet PHY needs 30ms to properly power up and some more
132 regulator-enable-ramp-delay = <100000>;
133 regulator-name = "vcc-phy";
137 regulator-min-microvolt = <3300000>;
138 regulator-max-microvolt = <3300000>;
139 regulator-name = "vcc-hdmi";
143 regulator-min-microvolt = <3300000>;
144 regulator-max-microvolt = <3300000>;
145 regulator-name = "vcc-mipi";
149 regulator-min-microvolt = <3300000>;
150 regulator-max-microvolt = <3300000>;
151 regulator-name = "vcc-wifi";
155 vcc-hdmi-supply = <®_dldo1>;
159 simple-audio-card,aux-devs = <&codec_analog>;
160 simple-audio-card,widgets = "Microphone", "Microphone Jack",
162 simple-audio-card,routing =
173 pinctrl-names = "default";
174 pinctrl-0 = <&uart0_pb_pins>;
178 /* On Pi-2 connector */
180 pinctrl-names = "default";
181 pinctrl-0 = <&uart2_pins>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&uart3_pins>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&uart4_pins>;