Lines Matching +full:cpvdd +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "sun50i-a64.dtsi"
10 #include "sun50i-a64-cpu-opp.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/pwm/pwm.h>
18 compatible = "pine64,pinetab", "allwinner,sun50i-a64";
19 chassis-type = "tablet";
27 compatible = "pwm-backlight";
29 brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
30 default-brightness-level = <15>;
31 enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
32 power-supply = <&vdd_bl>;
36 stdout-path = "serial0:115200n8";
39 hdmi-connector {
40 compatible = "hdmi-connector";
45 remote-endpoint = <&hdmi_out_con>;
50 i2c-csi {
51 compatible = "i2c-gpio";
52 sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
53 scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
54 i2c-gpio,delay-us = <5>;
55 #address-cells = <1>;
56 #size-cells = <0>;
62 pinctrl-names = "default";
63 pinctrl-0 = <&csi_mclk_pin>;
65 clock-names = "xclk";
67 AVDD-supply = <®_dldo3>;
68 DOVDD-supply = <®_aldo1>;
69 DVDD-supply = <®_eldo3>;
70 reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
71 powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
75 remote-endpoint = <&csi_ep>;
76 bus-width = <8>;
77 hsync-active = <1>; /* Active high */
78 vsync-active = <0>; /* Active low */
79 data-active = <1>; /* Active high */
80 pclk-sample = <1>; /* Rising */
86 speaker_amp: audio-amplifier {
87 compatible = "simple-audio-amplifier";
88 enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
89 sound-name-prefix = "Speaker Amp";
93 compatible = "regulator-fixed";
94 regulator-name = "bl-3v3";
95 regulator-min-microvolt = <3300000>;
96 regulator-max-microvolt = <3300000>;
98 enable-active-high;
102 compatible = "mmc-pwrseq-simple";
103 reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
104 post-power-on-delay-ms = <200>;
113 cpvdd-supply = <®_eldo1>;
118 cpu-supply = <®_dcdc2>;
122 cpu-supply = <®_dcdc2>;
126 cpu-supply = <®_dcdc2>;
130 cpu-supply = <®_dcdc2>;
138 remote-endpoint = <&ov5640_ep>;
139 bus-width = <8>;
140 hsync-active = <1>; /* Active high */
141 vsync-active = <0>; /* Active low */
142 data-active = <1>; /* Active high */
143 pclk-sample = <1>; /* Rising */
161 vcc-dsi-supply = <®_dldo1>;
165 compatible = "feixin,k101-im2ba02";
167 avdd-supply = <®_dc1sw>;
168 dvdd-supply = <®_dc1sw>;
169 cvdd-supply = <®_ldo_io1>;
170 reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
189 interrupt-parent = <&pio>;
191 irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
192 reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
193 AVDD28-supply = <®_ldo_io1>;
198 bias-pull-up;
208 vref-supply = <®_aldo3>;
211 button-200 {
218 button-400 {
231 pinctrl-names = "default";
232 pinctrl-0 = <&mmc0_pins>;
233 vmmc-supply = <®_dcdc1>;
234 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
235 disable-wp;
236 bus-width = <4>;
241 pinctrl-names = "default";
242 pinctrl-0 = <&mmc1_pins>;
243 vmmc-supply = <®_dldo4>;
244 vqmmc-supply = <®_eldo1>;
245 mmc-pwrseq = <&wifi_pwrseq>;
246 bus-width = <4>;
247 non-removable;
256 pinctrl-names = "default";
257 pinctrl-0 = <&mmc2_pins>;
258 vmmc-supply = <®_dcdc1>;
259 vqmmc-supply = <®_dcdc1>;
260 bus-width = <8>;
261 non-removable;
262 cap-mmc-hw-reset;
278 compatible = "x-powers,axp803";
280 interrupt-parent = <&r_intc>;
282 x-powers,drive-vbus-en;
297 regulator-min-microvolt = <2800000>;
298 regulator-max-microvolt = <2800000>;
299 regulator-name = "dovdd-csi";
303 regulator-always-on;
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <3300000>;
306 regulator-name = "vcc-pl";
310 regulator-always-on;
311 regulator-min-microvolt = <2700000>;
312 regulator-max-microvolt = <3300000>;
313 regulator-name = "vcc-pll-avcc";
317 regulator-name = "vcc-lcd";
321 regulator-always-on;
322 regulator-min-microvolt = <3300000>;
323 regulator-max-microvolt = <3300000>;
324 regulator-name = "vcc-3v3";
328 regulator-always-on;
329 regulator-min-microvolt = <1000000>;
330 regulator-max-microvolt = <1300000>;
331 regulator-name = "vdd-cpux";
337 regulator-always-on;
338 regulator-min-microvolt = <1200000>;
339 regulator-max-microvolt = <1200000>;
340 regulator-name = "vcc-dram";
344 regulator-always-on;
345 regulator-min-microvolt = <1100000>;
346 regulator-max-microvolt = <1100000>;
347 regulator-name = "vdd-sys";
351 regulator-always-on;
352 regulator-min-microvolt = <3300000>;
353 regulator-max-microvolt = <3300000>;
354 regulator-name = "vcc-hdmi-dsi-sensor";
358 regulator-min-microvolt = <2800000>;
359 regulator-max-microvolt = <2800000>;
360 regulator-name = "avdd-csi";
364 regulator-min-microvolt = <3300000>;
365 regulator-max-microvolt = <3300000>;
366 regulator-name = "vcc-wifi";
370 regulator-name = "usb0-vbus";
375 regulator-always-on;
376 regulator-min-microvolt = <1800000>;
377 regulator-max-microvolt = <1800000>;
378 regulator-name = "cpvdd";
382 regulator-min-microvolt = <1800000>;
383 regulator-max-microvolt = <1800000>;
384 regulator-name = "vcca-1v8";
388 regulator-min-microvolt = <1800000>;
389 regulator-max-microvolt = <1800000>;
390 regulator-name = "dvdd-1v8-csi";
394 regulator-min-microvolt = <1200000>;
395 regulator-max-microvolt = <1200000>;
396 regulator-name = "vcc-1v2-hsic";
400 regulator-always-on;
401 regulator-min-microvolt = <1100000>;
402 regulator-max-microvolt = <1100000>;
403 regulator-name = "vdd-cpus";
407 regulator-min-microvolt = <3300000>;
408 regulator-max-microvolt = <3300000>;
409 regulator-name = "vcc-usb";
414 regulator-min-microvolt = <3300000>;
415 regulator-max-microvolt = <3300000>;
416 regulator-enable-ramp-delay = <3500000>;
417 regulator-name = "vcc-touchscreen";
422 regulator-name = "vcc-rtc";
426 vcc-hdmi-supply = <®_dldo1>;
430 hvcc-supply = <®_dldo1>;
436 remote-endpoint = <&hdmi_con_in>;
442 simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
443 simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
447 simple-audio-card,routing =
464 pinctrl-names = "default";
465 pinctrl-0 = <&uart0_pb_pins>;
479 usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
480 usb0_vbus_power-supply = <&usb_power_supply>;
481 usb0_vbus-supply = <®_drivevbus>;
482 usb1_vbus-supply = <®_ldo_io0>;