Lines Matching +full:pll +full:- +full:master
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "sun50i-a64.dtsi"
7 #include "sun50i-a64-cpu-opp.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/pwm/pwm.h>
15 chassis-type = "handset";
23 compatible = "pwm-backlight";
25 enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
26 power-supply = <®_ps>;
30 bt_sco_codec: bt-sco-codec {
31 #sound-dai-cells = <1>;
32 compatible = "linux,bt-sco";
36 stdout-path = "serial0:115200n8";
40 compatible = "gpio-leds";
42 led-0 {
48 led-1 {
54 led-2 {
61 reg_ps: ps-regulator {
62 compatible = "regulator-fixed";
63 regulator-name = "ps";
64 regulator-min-microvolt = <5000000>;
65 regulator-max-microvolt = <5000000>;
66 regulator-boot-on;
69 reg_vbat_wifi: vbat-wifi {
70 compatible = "regulator-fixed";
71 regulator-min-microvolt = <3300000>;
72 regulator-max-microvolt = <3300000>;
73 regulator-name = "vbat-wifi";
76 sgm3140: led-controller {
78 vin-supply = <®_dcdc1>;
83 flash-max-timeout-us = <250000>;
87 speaker_amp: audio-amplifier {
88 compatible = "simple-audio-amplifier";
89 enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
90 sound-name-prefix = "Speaker Amp";
94 compatible = "gpio-vibrator";
95 enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
96 vcc-supply = <®_dcdc1>;
101 pinctrl-names = "default";
102 pinctrl-0 = <&aif3_pins>;
107 cpvdd-supply = <®_eldo1>;
112 cpu-supply = <®_dcdc2>;
116 cpu-supply = <®_dcdc2>;
120 cpu-supply = <®_dcdc2>;
124 cpu-supply = <®_dcdc2>;
140 vcc-dsi-supply = <®_dldo1>;
146 reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
147 iovcc-supply = <®_dldo2>;
148 vcc-supply = <®_ldo_io0>;
167 interrupt-parent = <&pio>;
169 irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
170 reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
171 AVDD28-supply = <®_ldo_io0>;
172 VDDIO-supply = <®_ldo_io0>;
173 touchscreen-size-x = <720>;
174 touchscreen-size-y = <1440>;
183 compatible = "st,lis3mdl-magn";
185 vdd-supply = <®_dldo1>;
186 vddio-supply = <®_dldo1>;
190 light-sensor@48 {
193 interrupt-parent = <&pio>;
201 interrupt-parent = <&pio>;
203 vdd-supply = <®_dldo1>;
204 vddio-supply = <®_dldo1>;
214 vref-supply = <®_aldo3>;
215 wakeup-source;
218 button-200 {
225 button-400 {
234 pinctrl-names = "default";
235 pinctrl-0 = <&mmc0_pins>;
236 vmmc-supply = <®_dcdc1>;
237 vqmmc-supply = <®_dcdc1>;
238 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
239 disable-wp;
240 bus-width = <4>;
245 pinctrl-names = "default";
246 pinctrl-0 = <&mmc1_pins>;
247 vmmc-supply = <®_vbat_wifi>;
248 vqmmc-supply = <®_dldo4>;
249 bus-width = <4>;
250 non-removable;
259 pinctrl-names = "default";
260 pinctrl-0 = <&mmc2_pins>;
261 vmmc-supply = <®_dcdc1>;
262 vqmmc-supply = <®_dcdc1>;
263 bus-width = <8>;
264 non-removable;
265 cap-mmc-hw-reset;
278 vcc-pb-supply = <®_dcdc1>;
279 vcc-pc-supply = <®_dcdc1>;
280 vcc-pd-supply = <®_dcdc1>;
281 vcc-pe-supply = <®_aldo1>;
282 vcc-pf-supply = <®_dcdc1>;
283 vcc-pg-supply = <®_dldo4>;
284 vcc-ph-supply = <®_dcdc1>;
293 * vcc-pl-supply = <®_aldo2>;
305 compatible = "x-powers,axp803";
307 interrupt-parent = <&r_intc>;
319 regulator-min-microvolt = <1800000>;
320 regulator-max-microvolt = <1800000>;
321 regulator-name = "dovdd-csi";
325 regulator-always-on;
326 regulator-min-microvolt = <1800000>;
327 regulator-max-microvolt = <1800000>;
328 regulator-name = "vcc-pl";
332 regulator-always-on;
333 regulator-min-microvolt = <3000000>;
334 regulator-max-microvolt = <3000000>;
335 regulator-name = "vcc-pll-avcc";
339 regulator-always-on;
340 regulator-min-microvolt = <3300000>;
341 regulator-max-microvolt = <3300000>;
342 regulator-name = "vcc-3v3";
346 regulator-always-on;
347 regulator-min-microvolt = <1000000>;
348 regulator-max-microvolt = <1300000>;
349 regulator-name = "vdd-cpux";
355 regulator-always-on;
356 regulator-min-microvolt = <1200000>;
357 regulator-max-microvolt = <1200000>;
358 regulator-name = "vcc-dram";
362 regulator-always-on;
363 regulator-min-microvolt = <1100000>;
364 regulator-max-microvolt = <1100000>;
365 regulator-name = "vdd-sys";
369 regulator-min-microvolt = <3300000>;
370 regulator-max-microvolt = <3300000>;
371 regulator-name = "vcc-dsi-sensor";
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
377 regulator-name = "vcc-mipi-io";
381 regulator-min-microvolt = <2800000>;
382 regulator-max-microvolt = <2800000>;
383 regulator-name = "avdd-csi";
387 regulator-min-microvolt = <1800000>;
388 regulator-max-microvolt = <1800000>;
389 regulator-name = "vcc-wifi-io";
393 regulator-always-on;
394 regulator-min-microvolt = <1800000>;
395 regulator-max-microvolt = <1800000>;
396 regulator-name = "vcc-lpddr";
400 regulator-min-microvolt = <1800000>;
401 regulator-max-microvolt = <1800000>;
402 regulator-name = "dvdd-1v8-csi";
406 regulator-min-microvolt = <1200000>;
407 regulator-max-microvolt = <1200000>;
408 regulator-name = "vcc-1v2-hsic";
412 regulator-always-on;
413 regulator-min-microvolt = <1100000>;
414 regulator-max-microvolt = <1100000>;
415 regulator-name = "vdd-cpus";
419 regulator-min-microvolt = <3300000>;
420 regulator-max-microvolt = <3300000>;
421 regulator-name = "vcc-lcd-ctp-stk";
426 regulator-min-microvolt = <1800000>;
427 regulator-max-microvolt = <1800000>;
428 regulator-name = "vcc-1v8-typec";
433 regulator-name = "vcc-rtc";
438 simple-audio-card,name = "PinePhone";
439 simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
440 simple-audio-card,widgets = "Microphone", "Headset Microphone",
445 simple-audio-card,routing =
461 simple-audio-card,dai-link@2 {
463 frame-master = <&link2_codec>;
464 bitclock-master = <&link2_codec>;
465 bitclock-inversion;
468 sound-dai = <&bt_sco_codec 0>;
472 sound-dai = <&codec 2>;
473 dai-tdm-slot-num = <1>;
474 dai-tdm-slot-width = <32>;
480 pinctrl-names = "default";
481 pinctrl-0 = <&uart0_pb_pins>;
486 pinctrl-names = "default";
487 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
491 compatible = "realtek,rtl8723cs-bt";
492 device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
493 enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
494 host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
500 pinctrl-names = "default";
501 pinctrl-0 = <&uart3_pins>;