Lines Matching +full:conf +full:- +full:mdio
1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2011 - 2014 Xilinx
6 /dts-v1/;
7 #include "zynq-7000.dtsi"
11 compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
27 stdout-path = "serial0:115200n8";
31 compatible = "usb-nop-xceiv";
32 #phy-cells = <0>;
37 ps-clk-frequency = <33333333>;
42 phy-mode = "rgmii-id";
43 phy-handle = <ðernet_phy>;
44 pinctrl-names = "default";
45 pinctrl-0 = <&pinctrl_gem0_default>;
47 ethernet_phy: ethernet-phy@7 {
49 device_type = "ethernet-phy";
54 pinctrl-names = "default";
55 pinctrl-0 = <&pinctrl_gpio0_default>;
60 clock-frequency = <400000>;
61 pinctrl-names = "default";
62 pinctrl-0 = <&pinctrl_i2c0_default>;
64 i2c-mux@74 {
66 #address-cells = <1>;
67 #size-cells = <0>;
71 #address-cells = <1>;
72 #size-cells = <0>;
74 si570: clock-generator@5d {
75 #clock-cells = <0>;
77 temperature-stability = <50>;
79 factory-fout = <156250000>;
80 clock-frequency = <148500000>;
85 #address-cells = <1>;
86 #size-cells = <0>;
88 adv7511: hdmi-tx@39 {
91 adi,input-depth = <8>;
92 adi,input-colorspace = "yuv422";
93 adi,input-clock = "1x";
94 adi,input-style = <3>;
95 adi,input-justification = "evenly";
100 #address-cells = <1>;
101 #size-cells = <0>;
110 #address-cells = <1>;
111 #size-cells = <0>;
116 gpio-controller;
117 #gpio-cells = <2>;
122 #address-cells = <1>;
123 #size-cells = <0>;
132 #address-cells = <1>;
133 #size-cells = <0>;
144 pinctrl_gem0_default: gem0-default {
150 conf {
152 slew-rate = <0>;
153 io-standard = <4>;
156 conf-rx {
158 bias-high-impedance;
159 low-power-disable;
162 conf-tx {
164 low-power-enable;
165 bias-disable;
168 mux-mdio {
173 conf-mdio {
175 slew-rate = <0>;
176 io-standard = <1>;
177 bias-disable;
181 pinctrl_gpio0_default: gpio0-default {
187 conf {
189 slew-rate = <0>;
190 io-standard = <1>;
193 conf-pull-up {
195 bias-pull-up;
198 conf-pull-none {
200 bias-disable;
204 pinctrl_i2c0_default: i2c0-default {
210 conf {
212 bias-pull-up;
213 slew-rate = <0>;
214 io-standard = <1>;
218 pinctrl_sdhci0_default: sdhci0-default {
224 conf {
226 slew-rate = <0>;
227 io-standard = <1>;
228 bias-disable;
231 mux-cd {
236 conf-cd {
238 bias-high-impedance;
239 bias-pull-up;
240 slew-rate = <0>;
241 io-standard = <1>;
244 mux-wp {
249 conf-wp {
251 bias-high-impedance;
252 bias-pull-up;
253 slew-rate = <0>;
254 io-standard = <1>;
258 pinctrl_uart1_default: uart1-default {
264 conf {
266 slew-rate = <0>;
267 io-standard = <1>;
270 conf-rx {
272 bias-high-impedance;
275 conf-tx {
277 bias-disable;
281 pinctrl_usb0_default: usb0-default {
287 conf {
289 slew-rate = <0>;
290 io-standard = <1>;
293 conf-rx {
295 bias-high-impedance;
298 conf-tx {
301 bias-disable;
308 pinctrl-names = "default";
309 pinctrl-0 = <&pinctrl_sdhci0_default>;
314 pinctrl-names = "default";
315 pinctrl-0 = <&pinctrl_uart1_default>;
321 usb-phy = <&usb_phy0>;
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_usb0_default>;