Lines Matching +full:dsi +full:- +full:rx
1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
6 /dts-v1/;
8 #include "stm32mp157c-ed1.dts"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/media/video-interfaces.h>
15 compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
23 stdout-path = "serial0:115200n8";
27 clk_ext_camera: clk-ext-camera {
28 #clock-cells = <0>;
29 compatible = "fixed-clock";
30 clock-frequency = <24000000>;
35 compatible = "gpio-keys";
36 pinctrl-0 = <&joystick_pins>;
37 pinctrl-names = "default";
38 button-0 {
41 interrupt-parent = <&stmfx_pinctrl>;
44 button-1 {
47 interrupt-parent = <&stmfx_pinctrl>;
50 button-2 {
53 interrupt-parent = <&stmfx_pinctrl>;
56 button-3 {
59 interrupt-parent = <&stmfx_pinctrl>;
62 button-4 {
65 interrupt-parent = <&stmfx_pinctrl>;
70 panel_backlight: panel-backlight {
71 compatible = "gpio-backlight";
73 default-on;
79 pinctrl-names = "default";
80 pinctrl-0 = <&cec_pins_a>;
86 pinctrl-names = "default", "sleep";
87 pinctrl-0 = <&dcmi_pins_a>;
88 pinctrl-1 = <&dcmi_sleep_pins_a>;
92 remote-endpoint = <&ov5640_0>;
93 bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
94 bus-width = <8>;
95 hsync-active = <0>;
96 vsync-active = <0>;
97 pclk-sample = <1>;
102 &dsi {
103 #address-cells = <1>;
104 #size-cells = <0>;
110 reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
112 power-supply = <&v3v3>;
117 remote-endpoint = <&dsi_out>;
124 remote-endpoint = <<dc_ep0_out>;
128 remote-endpoint = <&dsi_panel_in>;
133 pinctrl-0 = <ðernet0_rgmii_pins_a>;
134 pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
135 pinctrl-names = "default", "sleep";
136 phy-mode = "rgmii-id";
137 max-speed = <1000>;
138 phy-handle = <&phy0>;
141 #address-cells = <1>;
142 #size-cells = <0>;
143 compatible = "snps,dwmac-mdio";
144 phy0: ethernet-phy@0 {
151 pinctrl-names = "default", "sleep";
152 pinctrl-0 = <&fmc_pins_a>;
153 pinctrl-1 = <&fmc_sleep_pins_a>;
156 nand-controller@4,0 {
161 nand-on-flash-bbt;
162 #address-cells = <1>;
163 #size-cells = <1>;
169 pinctrl-names = "default", "sleep";
170 pinctrl-0 = <&i2c2_pins_a>;
171 pinctrl-1 = <&i2c2_sleep_pins_a>;
172 i2c-scl-rising-time-ns = <185>;
173 i2c-scl-falling-time-ns = <20>;
180 clock-names = "xclk";
181 AVDD-supply = <&v2v8>;
182 DOVDD-supply = <&v2v8>;
183 DVDD-supply = <&v2v8>;
184 powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
185 reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
191 remote-endpoint = <&dcmi_0>;
192 bus-width = <8>;
193 data-shift = <2>; /* lines 9:2 are used */
194 hsync-active = <0>;
195 vsync-active = <0>;
196 pclk-sample = <1>;
202 compatible = "st,stmfx-0300";
205 interrupt-parent = <&gpioi>;
206 vdd-supply = <&v3v3>;
209 compatible = "st,stmfx-0300-pinctrl";
210 gpio-controller;
211 #gpio-cells = <2>;
212 interrupt-controller;
213 #interrupt-cells = <2>;
214 gpio-ranges = <&stmfx_pinctrl 0 0 24>;
216 joystick_pins: joystick-pins {
218 bias-pull-down;
225 pinctrl-names = "default", "sleep";
226 pinctrl-0 = <&i2c5_pins_a>;
227 pinctrl-1 = <&i2c5_sleep_pins_a>;
228 i2c-scl-rising-time-ns = <185>;
229 i2c-scl-falling-time-ns = <20>;
238 remote-endpoint = <&dsi_in>;
244 pinctrl-names = "default", "sleep";
245 pinctrl-0 = <&m_can1_pins_a>;
246 pinctrl-1 = <&m_can1_sleep_pins_a>;
251 pinctrl-names = "default", "sleep";
252 pinctrl-0 = <&qspi_clk_pins_a
257 pinctrl-1 = <&qspi_clk_sleep_pins_a
263 #address-cells = <1>;
264 #size-cells = <0>;
268 compatible = "jedec,spi-nor";
270 spi-rx-bus-width = <4>;
271 spi-max-frequency = <108000000>;
272 #address-cells = <1>;
273 #size-cells = <1>;
277 compatible = "jedec,spi-nor";
279 spi-rx-bus-width = <4>;
280 spi-max-frequency = <108000000>;
281 #address-cells = <1>;
282 #size-cells = <1>;
287 pinctrl-names = "default", "opendrain", "sleep";
288 pinctrl-0 = <&sdmmc3_b4_pins_a>;
289 pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
290 pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
291 broken-cd;
292 st,neg-edge;
293 bus-width = <4>;
294 vmmc-supply = <&v3v3>;
299 pinctrl-names = "default";
300 pinctrl-0 = <&spi1_pins_a>;
305 /* spare dmas for other usage (un-delete to enable pwm capture) */
306 /delete-property/dmas;
307 /delete-property/dma-names;
310 pinctrl-0 = <&pwm2_pins_a>;
311 pinctrl-1 = <&pwm2_sleep_pins_a>;
312 pinctrl-names = "default", "sleep";
321 /delete-property/dmas;
322 /delete-property/dma-names;
325 pinctrl-0 = <&pwm8_pins_a>;
326 pinctrl-1 = <&pwm8_sleep_pins_a>;
327 pinctrl-names = "default", "sleep";
336 /delete-property/dmas;
337 /delete-property/dma-names;
340 pinctrl-0 = <&pwm12_pins_a>;
341 pinctrl-1 = <&pwm12_sleep_pins_a>;
342 pinctrl-names = "default", "sleep";
351 pinctrl-names = "default", "sleep", "idle";
352 pinctrl-0 = <&usart3_pins_b>;
353 pinctrl-1 = <&usart3_sleep_pins_b>;
354 pinctrl-2 = <&usart3_idle_pins_b>;
360 uart-has-rtscts;
366 #address-cells = <1>;
367 #size-cells = <0>;
372 vdd-supply = <&v3v3>;
377 pinctrl-0 = <&usbotg_hs_pins_a>;
378 pinctrl-names = "default";
380 phy-names = "usb2-phy";
389 st,tune-hs-dc-level = <2>;
390 st,enable-fs-rftime-tuning;
391 st,enable-hs-rftime-reduction;
392 st,trim-hs-current = <15>;
393 st,trim-hs-impedance = <1>;
394 st,tune-squelch-level = <3>;
395 st,tune-hs-rx-offset = <2>;
396 st,no-lsfs-sc;
399 compatible = "usb-a-connector";
400 vbus-supply = <&vbus_sw>;
405 st,tune-hs-dc-level = <2>;
406 st,enable-fs-rftime-tuning;
407 st,enable-hs-rftime-reduction;
408 st,trim-hs-current = <15>;
409 st,trim-hs-impedance = <1>;
410 st,tune-squelch-level = <3>;
411 st,tune-hs-rx-offset = <2>;
412 st,no-lsfs-sc;