Lines Matching +full:onkey +full:- +full:falling
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
9 #include "stm32mp15-pinctrl.dtsi"
10 #include "stm32mp15xxac-pinctrl.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/mfd/st,stpmic1.h>
23 stdout-path = "serial0:115200n8";
31 reserved-memory {
32 #address-cells = <1>;
33 #size-cells = <1>;
37 compatible = "shared-dma-pool";
39 no-map;
43 compatible = "shared-dma-pool";
45 no-map;
49 compatible = "shared-dma-pool";
51 no-map;
55 compatible = "shared-dma-pool";
57 no-map;
61 compatible = "shared-dma-pool";
63 no-map;
67 compatible = "shared-dma-pool";
69 no-map;
74 compatible = "gpio-leds";
75 led-0 {
78 linux,default-trigger = "none";
79 default-state = "off";
80 panic-indicator;
82 led-1 {
85 linux,default-trigger = "heartbeat";
86 default-state = "on";
92 vdd-supply = <&vdd>;
93 vdda-supply = <&vdd>;
94 vref-supply = <&vrefbuf>;
98 pinctrl-names = "default";
99 pinctrl-0 = <&adc1_in6_pins_a>;
103 st,min-sample-time-ns = <5000>;
108 #address-cells = <1>;
109 #size-cells = <0>;
114 st,min-sample-time-ns = <9000>;
119 st,min-sample-time-ns = <9000>;
124 st,min-sample-time-ns = <9000>;
129 st,min-sample-time-ns = <9000>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
145 vref-supply = <&vdda>;
162 snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>;
163 snps,reset-active-low;
164 snps,reset-delays-us = <0 30000 50000>;
165 pinctrl-0 = <ðernet0_rmii_pins_b>;
166 pinctrl-1 = <ðernet0_rmii_sleep_pins_b>;
167 pinctrl-names = "default", "sleep";
168 phy-mode = "rmii";
169 max-speed = <100>;
170 phy-handle = <&phy0>;
171 st,eth-ref-clk-sel;
174 #address-cells = <1>;
175 #size-cells = <0>;
176 compatible = "snps,dwmac-mdio";
177 phy0: ethernet-phy@0 {
188 pinctrl-names = "default", "sleep";
189 pinctrl-0 = <&i2c1_pins_a>;
190 pinctrl-1 = <&i2c1_sleep_pins_a>;
191 i2c-scl-rising-time-ns = <100>;
192 i2c-scl-falling-time-ns = <7>;
194 /delete-property/dmas;
195 /delete-property/dma-names;
199 pinctrl-names = "default", "sleep";
200 pinctrl-0 = <&i2c4_pins_a>;
201 pinctrl-1 = <&i2c4_sleep_pins_a>;
202 i2c-scl-rising-time-ns = <185>;
203 i2c-scl-falling-time-ns = <20>;
205 /delete-property/dmas;
206 /delete-property/dma-names;
211 interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
212 interrupt-controller;
213 #interrupt-cells = <2>;
217 compatible = "st,stpmic1-regulators";
219 ldo1-supply = <&v3v3>;
220 ldo3-supply = <&vdd_ddr>;
221 ldo6-supply = <&v3v3>;
222 pwr_sw1-supply = <&bst_out>;
223 pwr_sw2-supply = <&bst_out>;
226 regulator-name = "vddcore";
227 regulator-min-microvolt = <1200000>;
228 regulator-max-microvolt = <1350000>;
229 regulator-always-on;
230 regulator-initial-mode = <0>;
231 regulator-over-current-protection;
235 regulator-name = "vdd_ddr";
236 regulator-min-microvolt = <1350000>;
237 regulator-max-microvolt = <1350000>;
238 regulator-always-on;
239 regulator-initial-mode = <0>;
240 regulator-over-current-protection;
244 regulator-name = "vdd";
245 regulator-min-microvolt = <3300000>;
246 regulator-max-microvolt = <3300000>;
247 regulator-always-on;
248 st,mask-reset;
249 regulator-initial-mode = <0>;
250 regulator-over-current-protection;
254 regulator-name = "v3v3";
255 regulator-min-microvolt = <3300000>;
256 regulator-max-microvolt = <3300000>;
257 regulator-always-on;
258 regulator-over-current-protection;
259 regulator-initial-mode = <0>;
263 regulator-name = "v1v8_audio";
264 regulator-min-microvolt = <1800000>;
265 regulator-max-microvolt = <1800000>;
266 regulator-always-on;
271 regulator-name = "v3v3_hdmi";
272 regulator-min-microvolt = <3300000>;
273 regulator-max-microvolt = <3300000>;
274 regulator-always-on;
279 regulator-name = "vtt_ddr";
280 regulator-min-microvolt = <500000>;
281 regulator-max-microvolt = <750000>;
282 regulator-always-on;
283 regulator-over-current-protection;
287 regulator-name = "vdd_usb";
288 regulator-min-microvolt = <3300000>;
289 regulator-max-microvolt = <3300000>;
294 regulator-name = "vdd_sd";
295 regulator-min-microvolt = <3300000>;
296 regulator-max-microvolt = <3300000>;
298 regulator-always-on;
302 regulator-name = "vdda";
303 regulator-min-microvolt = <2900000>;
304 regulator-max-microvolt = <2900000>;
305 regulator-always-on;
307 regulator-boot-on;
311 regulator-name = "vref_ddr";
312 regulator-always-on;
316 regulator-name = "bst_out";
321 regulator-name = "vbus_otg";
323 regulator-active-discharge = <1>;
327 regulator-name = "usbh_vbus";
329 regulator-always-on;
330 regulator-boot-on;
334 onkey {
335 compatible = "st,stpmic1-onkey";
337 interrupt-names = "onkey-falling", "onkey-rising";
342 compatible = "st,stpmic1-wdt";
349 pinctrl-names = "default", "sleep";
350 pinctrl-0 = <&i2c5_pins_a>;
351 pinctrl-1 = <&i2c5_sleep_pins_a>;
352 i2c-scl-rising-time-ns = <185>;
353 i2c-scl-falling-time-ns = <20>;
354 /delete-property/dmas;
355 /delete-property/dma-names;
363 timeout-sec = <32>;
368 memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
371 mbox-names = "vq0", "vq1", "shutdown", "detach";
372 interrupt-parent = <&exti>;
374 interrupt-names = "wdg";
380 vdd-supply = <&vdd>;
381 vdd_3v3_usbfs-supply = <&vdd_usb>;
385 pinctrl-names = "default", "sleep";
386 pinctrl-0 = <&qspi_clk_pins_a
389 pinctrl-1 = <&qspi_clk_sleep_pins_a
393 #address-cells = <1>;
394 #size-cells = <0>;
398 compatible = "jedec,spi-nor";
400 spi-max-frequency = <133000000>;
401 spi-rx-bus-width = <1>;
402 spi-tx-bus-width = <1>;
403 #address-cells = <1>;
404 #size-cells = <1>;
417 arm,primecell-periphid = <0x10153180>;
418 pinctrl-names = "default", "opendrain", "sleep";
419 pinctrl-0 = <&sdmmc2_b4_pins_b>;
420 pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
421 pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
422 non-removable;
423 st,neg-edge;
424 bus-width = <4>;
425 vmmc-supply = <&v3v3>;
430 pinctrl-names = "default";
431 pinctrl-0 = <&spi1_pins_a>;
432 cs-gpios = <&gpioz 3 0>;
438 /delete-property/dmas;
439 /delete-property/dma-names;
441 pinctrl-0 = <&pwm1_pins_b>;
442 pinctrl-1 = <&pwm1_sleep_pins_b>;
443 pinctrl-names = "default", "sleep";
452 /delete-property/dmas;
453 /delete-property/dma-names;
455 pinctrl-0 = <&pwm4_pins_b>;
456 pinctrl-1 = <&pwm4_sleep_pins_b>;
457 pinctrl-names = "default", "sleep";
466 /delete-property/dmas;
467 /delete-property/dma-names;
469 pinctrl-0 = <&pwm5_pins_a>;
470 pinctrl-1 = <&pwm5_sleep_pins_a>;
471 pinctrl-names = "default", "sleep";
480 pinctrl-names = "default", "sleep", "idle";
481 pinctrl-0 = <&uart4_pins_a>;
482 pinctrl-1 = <&uart4_sleep_pins_a>;
483 pinctrl-2 = <&uart4_idle_pins_a>;
488 pinctrl-names = "default", "sleep";
489 pinctrl-0 = <&usart2_pins_a>;
490 pinctrl-1 = <&usart2_sleep_pins_a>;
495 pinctrl-names = "default", "sleep", "idle";
496 pinctrl-0 = <&usart3_pins_d>;
497 pinctrl-1 = <&usart3_sleep_pins_d>;
498 pinctrl-2 = <&usart3_idle_pins_d>;
512 pinctrl-names = "default";
513 pinctrl-0 = <&usbotg_hs_pins_a>;
514 phy-names = "usb2-phy";
516 vbus-supply = <&vbus_otg>;
525 phy-supply = <&vdd_usb>;
529 phy-supply = <&vdd_usb>;
533 regulator-min-microvolt = <2500000>;
534 regulator-max-microvolt = <2500000>;
535 vdda-supply = <&vdd>;