Lines Matching +full:stmpe +full:- +full:adc
2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
4 * This file is dual-licensed: you can use it either under the terms
22 * MA 02110-1301 USA
48 /dts-v1/;
50 #include "stm32f429-pinctrl.dtsi"
51 #include <dt-bindings/input/input.h>
52 #include <dt-bindings/gpio/gpio.h>
53 #include <dt-bindings/media/video-interfaces.h>
56 model = "STMicroelectronics STM32429i-EVAL board";
57 compatible = "st,stm32429i-eval", "st,stm32f429";
61 stdout-path = "serial0:115200n8";
74 clk_ext_camera: clk-ext-camera {
75 #clock-cells = <0>;
76 compatible = "fixed-clock";
77 clock-frequency = <24000000>;
82 dma-ranges = <0xc0000000 0x0 0x10000000>;
85 vdda: regulator-vdda {
86 compatible = "regulator-fixed";
87 regulator-name = "vdda";
88 regulator-min-microvolt = <3300000>;
89 regulator-max-microvolt = <3300000>;
92 vref: regulator-vref {
93 compatible = "regulator-fixed";
94 regulator-name = "vref";
95 regulator-min-microvolt = <3300000>;
96 regulator-max-microvolt = <3300000>;
99 vdd_panel: vdd-panel {
100 compatible = "regulator-fixed";
101 regulator-name = "vdd_panel";
102 regulator-min-microvolt = <3300000>;
103 regulator-max-microvolt = <3300000>;
107 compatible = "gpio-leds";
108 led-green {
110 linux,default-trigger = "heartbeat";
112 led-orange {
115 led-red {
118 led-blue {
123 gpio-keys {
124 compatible = "gpio-keys";
126 button-0 {
131 button-1 {
139 #phy-cells = <0>;
140 compatible = "usb-nop-xceiv";
142 clock-names = "main_clk";
145 panel_rgb: panel-rgb {
146 compatible = "ampire,am-480272h3tmqw-t01h";
147 power-supply = <&vdd_panel>;
151 remote-endpoint = <<dc_out_rgb>;
157 compatible = "regulator-fixed";
158 regulator-name = "mmc_vcard";
159 regulator-min-microvolt = <3300000>;
160 regulator-max-microvolt = <3300000>;
164 &adc {
165 pinctrl-names = "default";
166 pinctrl-0 = <&adc3_in8_pin>;
167 vdda-supply = <&vdda>;
168 vref-supply = <&vref>;
170 adc3: adc@200 {
171 st,adc-channels = <8>;
177 clock-frequency = <25000000>;
189 remote-endpoint = <&ov2640_0>;
190 bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
191 bus-width = <8>;
192 hsync-active = <0>;
193 vsync-active = <0>;
194 pclk-sample = <1>;
200 pinctrl-0 = <&i2c1_pins>;
201 pinctrl-names = "default";
207 resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
208 pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
210 clock-names = "xvclk";
215 remote-endpoint = <&dcmi_0>;
224 interrupt-parent = <&gpioi>;
225 wakeup-source;
228 compatible = "st,stmpe-gpio";
229 gpio-controller;
230 #gpio-cells = <2>;
237 timeout-sec = <32>;
242 pinctrl-0 = <<dc_pins_a>;
243 pinctrl-names = "default";
247 remote-endpoint = <&panel_in_rgb>;
254 pinctrl-0 = <ðernet_mii>;
255 pinctrl-names = "default";
256 phy-mode = "mii";
257 phy-handle = <&phy1>;
259 #address-cells = <1>;
260 #size-cells = <0>;
261 compatible = "snps,dwmac-mdio";
262 phy1: ethernet-phy@1 {
274 vmmc-supply = <&mmc_vcard>;
275 cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
276 pinctrl-names = "default", "opendrain";
277 pinctrl-0 = <&sdio_pins>;
278 pinctrl-1 = <&sdio_pins_od>;
279 bus-width = <4>;
280 max-frequency = <12500000>;
287 pinctrl-0 = <&pwm1_pins>;
288 pinctrl-names = "default";
301 pinctrl-0 = <&pwm3_pins>;
302 pinctrl-names = "default";
313 compatible = "st,stm32-timer";
316 /delete-property/#address-cells;
317 /delete-property/#size-cells;
318 /delete-property/clock-names;
319 /delete-node/pwm;
320 /delete-node/timer@4;
324 pinctrl-0 = <&usart1_pins_a>;
325 pinctrl-names = "default";
332 phy-names = "usb2-phy";
333 pinctrl-0 = <&usbotg_hs_pins_a>;
334 pinctrl-names = "default";