Lines Matching +full:max +full:- +full:cur
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 ST-Ericsson AB
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/leds/common.h>
8 #include "ste-href-family-pinctrl.dtsi"
17 compatible = "simple-battery";
18 battery-type = "lithium-ion-polymer";
21 thermal-zones {
22 battery-thermal {
24 polling-delay = <0>;
25 polling-delay-passive = <0>;
26 thermal-sensors = <&bat_therm>;
29 battery-crit-hi {
40 io-channels = <&gpadc 0x02>; /* BatTemp */
41 pullup-uv = <1800000>;
42 pullup-ohm = <230000>;
43 pulldown-ohm = <0>;
44 #thermal-sensor-cells = <0>;
49 pinctrl-names = "default", "sleep";
50 pinctrl-0 = <&u0_a_1_default>;
51 pinctrl-1 = <&u0_a_1_sleep>;
57 pinctrl-names = "default", "sleep";
58 pinctrl-0 = <&u1rxtx_a_1_default>;
59 pinctrl-1 = <&u1rxtx_a_1_sleep>;
63 pinctrl-names = "default", "sleep";
64 pinctrl-0 = <&u2rxtx_c_1_default>;
65 pinctrl-1 = <&u2rxtx_c_1_sleep>;
70 pinctrl-names = "default","sleep";
71 pinctrl-0 = <&i2c0_a_1_default>;
72 pinctrl-1 = <&i2c0_a_1_sleep>;
77 pinctrl-names = "default","sleep";
78 pinctrl-0 = <&i2c1_b_2_default>;
79 pinctrl-1 = <&i2c1_b_2_sleep>;
84 pinctrl-names = "default","sleep";
85 pinctrl-0 = <&i2c2_b_2_default>;
86 pinctrl-1 = <&i2c2_b_2_sleep>;
92 clock-mode = /bits/ 8 <2>;
93 #address-cells = <1>;
94 #size-cells = <0>;
97 led-cur = /bits/ 8 <0x2f>;
98 max-cur = /bits/ 8 <0x5f>;
100 linux,default-trigger = "heartbeat";
104 led-cur = /bits/ 8 <0x2f>;
105 max-cur = /bits/ 8 <0x5f>;
110 led-cur = /bits/ 8 <0x2f>;
111 max-cur = /bits/ 8 <0x5f>;
119 clock-mode = /bits/ 8 <2>;
120 #address-cells = <1>;
121 #size-cells = <0>;
124 led-cur = /bits/ 8 <0x2f>;
125 max-cur = /bits/ 8 <0x5f>;
130 led-cur = /bits/ 8 <0x2f>;
131 max-cur = /bits/ 8 <0x5f>;
136 led-cur = /bits/ 8 <0x2f>;
137 max-cur = /bits/ 8 <0x5f>;
148 pinctrl-names = "default","sleep";
149 pinctrl-0 = <&i2c3_c_2_default>;
150 pinctrl-1 = <&i2c3_c_2_sleep>;
156 arm,primecell-periphid = <0x10480180>;
157 max-frequency = <100000000>;
158 bus-width = <4>;
159 cap-sd-highspeed;
160 cap-mmc-highspeed;
161 sd-uhs-sdr12;
162 sd-uhs-sdr25;
163 full-pwr-cycle;
164 st,sig-dir-dat0;
165 st,sig-dir-dat2;
166 st,sig-dir-cmd;
167 st,sig-pin-fbclk;
168 vmmc-supply = <&ab8500_ldo_aux3_reg>;
169 vqmmc-supply = <&vmmci>;
170 pinctrl-names = "default", "sleep";
171 pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
172 pinctrl-1 = <&mc0_a_1_sleep>;
179 arm,primecell-periphid = <0x10480180>;
180 max-frequency = <100000000>;
181 bus-width = <4>;
182 non-removable;
183 pinctrl-names = "default", "sleep";
184 pinctrl-0 = <&mc1_a_1_default>;
185 pinctrl-1 = <&mc1_a_1_sleep>;
192 arm,primecell-periphid = <0x10480180>;
193 max-frequency = <100000000>;
194 bus-width = <8>;
195 cap-mmc-highspeed;
196 non-removable;
197 no-sdio;
198 no-sd;
199 vmmc-supply = <&db8500_vsmps2_reg>;
200 pinctrl-names = "default", "sleep";
201 pinctrl-0 = <&mc2_a_1_default>;
202 pinctrl-1 = <&mc2_a_1_sleep>;
207 // On-board eMMC
209 arm,primecell-periphid = <0x10480180>;
210 max-frequency = <100000000>;
211 bus-width = <8>;
212 cap-mmc-highspeed;
213 non-removable;
214 no-sdio;
215 no-sd;
216 vmmc-supply = <&ab8500_ldo_aux2_reg>;
217 pinctrl-names = "default", "sleep";
218 pinctrl-0 = <&mc4_a_1_default>;
219 pinctrl-1 = <&mc4_a_1_sleep>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
231 pinctrl-names = "default";
232 pinctrl-0 = <&msp1txrx_a_1_default>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&msp2_a_1_default>;
254 pinctrl-names = "default", "sleep";
255 pinctrl-0 = <&lcd_default_mode>;
256 pinctrl-1 = <&lcd_sleep_mode>;