Lines Matching +full:ena +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
4 * Based on exynos4412-midas.dtsi.
10 /dts-v1/;
12 #include "exynos4412-ppmu-common.dtsi"
14 #include <dt-bindings/clock/maxim,max77686.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/linux-event-codes.h>
17 #include <dt-bindings/interrupt-controller/irq.h>
18 #include <dt-bindings/power/summit,smb347-charger.h>
19 #include "exynos-pinctrl.h"
36 stdout-path = &serial_2;
40 compatible = "samsung,secure-firmware";
44 fixed-rate-clocks {
46 compatible = "samsung,clock-xxti";
47 clock-frequency = <0>;
51 compatible = "samsung,clock-xusbxti";
52 clock-frequency = <24000000>;
56 gpio-keys {
57 compatible = "gpio-keys";
58 pinctrl-names = "default";
59 pinctrl-0 = <&gpio_keys>;
61 key-down {
62 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
65 debounce-interval = <10>;
68 key-up {
69 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
72 debounce-interval = <10>;
75 key-power {
76 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
79 debounce-interval = <10>;
80 wakeup-source;
84 voltage-regulator-1 {
85 compatible = "regulator-fixed";
86 regulator-name = "TSP_LDO1";
87 pinctrl-names = "default";
88 pinctrl-0 = <&tsp_reg_gpio_1>;
89 gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
90 enable-active-high;
91 regulator-always-on;
94 voltage-regulator-2 {
95 compatible = "regulator-fixed";
96 regulator-name = "TSP_LDO2";
97 pinctrl-names = "default";
98 pinctrl-0 = <&tsp_reg_gpio_2>;
99 gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
100 enable-active-high;
101 regulator-always-on;
104 voltage-regulator-3 {
105 compatible = "regulator-fixed";
106 regulator-name = "TSP_LDO3";
107 pinctrl-names = "default";
108 pinctrl-0 = <&tsp_reg_gpio_3>;
109 gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
110 startup-delay-us = <20000>;
111 enable-active-high;
112 regulator-always-on;
115 panel_vdd: voltage-regulator-4 {
116 compatible = "regulator-fixed";
117 regulator-name = "LCD_ENABLE";
118 pinctrl-names = "default";
119 pinctrl-0 = <&lcd_enable>;
120 gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
121 enable-active-high;
122 regulator-boot-on;
125 wlan_pwrseq: sdhci3-pwrseq {
126 compatible = "mmc-pwrseq-simple";
127 reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
128 pinctrl-0 = <&wifi_reset>;
129 pinctrl-names = "default";
131 clock-names = "ext_clock";
134 battery_cell: battery-cell {
135 compatible = "simple-battery";
136 device-chemistry = "lithium-ion";
137 constant-charge-current-max-microamp = <2200000>;
138 precharge-current-microamp = <250000>;
139 charge-term-current-microamp = <250000>;
140 constant-charge-voltage-max-microvolt = <4200000>;
143 i2c-gpio-1 {
144 compatible = "i2c-gpio";
145 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
146 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
147 i2c-gpio,delay-us = <2>;
148 #address-cells = <1>;
149 #size-cells = <0>;
152 compatible = "asahi-kasei,ak8975";
154 pinctrl-0 = <&ak8975_irq>;
155 pinctrl-names = "default";
156 interrupt-parent = <&gpm4>;
161 i2c-gpio-2 {
162 compatible = "i2c-gpio";
163 sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
164 scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
165 i2c-gpio,delay-us = <2>;
166 #address-cells = <1>;
167 #size-cells = <0>;
169 fuel-gauge@36 {
172 pinctrl-0 = <&fuel_alert_irq>;
173 pinctrl-names = "default";
174 interrupt-parent = <&gpx2>;
176 maxim,rsns-microohm = <10000>;
177 maxim,over-heat-temp = <600>;
178 maxim,over-volt = <4300>;
182 i2c-gpio-3 {
183 compatible = "i2c-gpio";
184 sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
185 scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
186 i2c-gpio,delay-us = <5>;
187 #address-cells = <1>;
188 #size-cells = <0>;
193 pinctrl-0 = <&stmpe_adc_irq>;
194 pinctrl-names = "default";
195 interrupt-parent = <&gpx0>;
197 st,adc-freq = <3>;
198 st,mod-12b = <1>;
199 st,ref-sel = <0>;
200 st,sample-time = <3>;
203 compatible = "st,stmpe-adc";
204 #io-channel-cells = <1>;
205 st,norequest-mask = <0x2f>;
210 i2c-gpio-4 {
211 compatible = "i2c-gpio";
212 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
213 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
215 i2c-gpio,delay-us = <2>;
216 #address-cells = <1>;
217 #size-cells = <0>;
222 summit,enable-usb-charging;
223 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
224 summit,fast-voltage-threshold-microvolt = <2600000>;
225 summit,chip-temperature-threshold-celsius = <130>;
226 summit,usb-current-limit-microamp = <1800000>;
228 monitored-battery = <&battery_cell>;
234 pinctrl-0 = <&lvds_nshdn>;
235 pinctrl-names = "default";
236 power-supply = <&panel_vdd>;
237 enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
242 remote-endpoint = <&fimd_ep>;
248 compatible = "pwm-backlight";
249 pinctrl-0 = <&led_bl_reset>;
250 pinctrl-names = "default";
251 enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
252 power-supply = <&panel_vdd>;
254 brightness-levels = <0 48 128 255>;
255 num-interpolated-steps = <8>;
256 default-brightness-level = <12>;
261 vdd-supply = <&ldo3_reg>;
267 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
268 vdd-supply = <&buck1_reg>;
283 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
284 vdd-supply = <&buck3_reg>;
314 cpu0-supply = <&buck2_reg>;
318 cooling-maps {
321 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
326 cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
337 pinctrl-0 = <&lcd_clk &lcd_data24>;
338 pinctrl-names = "default";
339 #address-cells = <1>;
340 #size-cells = <0>;
343 samsung,invert-vclk;
349 remote-endpoint = <&lcd_ep>;
355 mali-supply = <&buck4_reg>;
360 vusb_a-supply = <&ldo12_reg>;
366 samsung,i2c-sda-delay = <100>;
367 samsung,i2c-slave-addr = <0x10>;
368 samsung,i2c-max-bus-freq = <400000>;
369 pinctrl-0 = <&i2c3_bus>;
370 pinctrl-names = "default";
376 pinctrl-0 = <&tsp_rst &tsp_irq>;
377 pinctrl-names = "default";
378 interrupt-parent = <&gpm2>;
380 reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
385 samsung,i2c-sda-delay = <100>;
386 samsung,i2c-slave-addr = <0x10>;
387 samsung,i2c-max-bus-freq = <400000>;
388 pinctrl-0 = <&i2c7_bus>;
389 pinctrl-names = "default";
394 interrupt-parent = <&gpx0>;
396 pinctrl-0 = <&max77686_irq>;
397 pinctrl-names = "default";
398 wakeup-source;
400 #clock-cells = <1>;
402 voltage-regulators {
404 regulator-name = "ldo1";
405 regulator-always-on;
409 regulator-name = "ldo2";
410 regulator-always-on;
415 regulator-name = "VCC_1.8V_AP";
416 regulator-min-microvolt = <1800000>;
417 regulator-max-microvolt = <1800000>;
418 regulator-always-on;
419 regulator-boot-on;
421 regulator-state-mem {
422 regulator-on-in-suspend;
427 regulator-name = "ldo4";
428 regulator-always-on;
432 regulator-name = "VCC_1.8V_IO";
433 regulator-min-microvolt = <1800000>;
434 regulator-max-microvolt = <1800000>;
436 regulator-state-mem {
437 regulator-off-in-suspend;
442 regulator-name = "ldo6";
443 regulator-always-on;
447 regulator-name = "ldo7";
448 regulator-always-on;
453 regulator-name = "VMIPI_1.0V";
454 regulator-min-microvolt = <1000000>;
455 regulator-max-microvolt = <1000000>;
456 regulator-always-on;
457 regulator-boot-on;
459 regulator-state-mem {
460 regulator-on-in-suspend;
466 regulator-name = "VLED_IC_1.9V";
467 regulator-min-microvolt = <1950000>;
468 regulator-max-microvolt = <1950000>;
470 regulator-state-mem {
471 regulator-off-in-suspend;
477 regulator-name = "VMIPI_1.8V";
478 regulator-min-microvolt = <1800000>;
479 regulator-max-microvolt = <1800000>;
480 regulator-always-on;
481 regulator-boot-on;
483 regulator-state-mem {
484 regulator-on-in-suspend;
489 regulator-name = "VABB1_1.9V";
490 regulator-min-microvolt = <1950000>;
491 regulator-max-microvolt = <1950000>;
492 regulator-always-on;
493 regulator-boot-on;
495 regulator-state-mem {
496 regulator-off-in-suspend;
502 regulator-name = "VUOTG_3.0V";
503 regulator-min-microvolt = <3000000>;
504 regulator-max-microvolt = <3000000>;
505 regulator-always-on;
506 regulator-boot-on;
508 regulator-state-mem {
509 regulator-on-in-suspend;
515 regulator-name = "ldo13";
519 regulator-name = "VABB2_1.9V";
520 regulator-min-microvolt = <1950000>;
521 regulator-max-microvolt = <1950000>;
522 regulator-always-on;
523 regulator-boot-on;
525 regulator-state-mem {
526 regulator-off-in-suspend;
531 regulator-name = "ldo15";
532 regulator-always-on;
536 regulator-name = "ldo16";
537 regulator-always-on;
542 regulator-name = "ldo17";
547 regulator-name = "CAM_IO_1.8V";
548 regulator-min-microvolt = <1800000>;
549 regulator-max-microvolt = <1800000>;
551 regulator-state-mem {
552 regulator-off-in-suspend;
558 regulator-name = "VT_CORE_1.8V";
559 regulator-min-microvolt = <1800000>;
560 regulator-max-microvolt = <1800000>;
562 regulator-state-mem {
563 regulator-off-in-suspend;
569 regulator-name = "ldo20";
574 regulator-name = "VTF_2.8V";
575 regulator-min-microvolt = <2800000>;
576 regulator-max-microvolt = <2800000>;
577 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
582 regulator-name = "ldo22";
587 regulator-name = "VDD_ADC_3.3V";
588 regulator-min-microvolt = <3300000>;
589 regulator-max-microvolt = <3300000>;
590 regulator-always-on;
591 regulator-boot-on;
593 regulator-state-mem {
594 regulator-off-in-suspend;
600 regulator-name = "CAM_A2.8V";
601 regulator-min-microvolt = <2800000>;
602 regulator-max-microvolt = <2800000>;
604 regulator-state-mem {
605 regulator-off-in-suspend;
610 regulator-name = "VLED_3.3V";
611 regulator-min-microvolt = <3300000>;
612 regulator-max-microvolt = <3300000>;
614 regulator-state-mem {
615 regulator-off-in-suspend;
621 regulator-name = "3MP_AF_2.8V";
622 regulator-min-microvolt = <2800000>;
623 regulator-max-microvolt = <2800000>;
625 regulator-state-mem {
626 regulator-off-in-suspend;
631 regulator-name = "VDD_MIF";
632 regulator-min-microvolt = <850000>;
633 regulator-max-microvolt = <1050000>;
634 regulator-always-on;
635 regulator-boot-on;
639 regulator-name = "VDD_ARM";
640 regulator-min-microvolt = <850000>;
641 regulator-max-microvolt = <1500000>;
642 regulator-always-on;
643 regulator-boot-on;
647 regulator-name = "VDD_INT";
648 regulator-min-microvolt = <850000>;
649 regulator-max-microvolt = <1100000>;
650 regulator-always-on;
651 regulator-boot-on;
655 regulator-name = "VDD_G3D";
656 regulator-min-microvolt = <850000>;
657 regulator-max-microvolt = <1075000>;
658 regulator-boot-on;
662 regulator-name = "buck5";
663 regulator-always-on;
667 regulator-name = "buck6";
668 regulator-always-on;
672 regulator-name = "buck7";
673 regulator-always-on;
678 regulator-name = "buck8";
682 regulator-name = "3MP_CORE_1.2V";
683 regulator-min-microvolt = <1200000>;
684 regulator-max-microvolt = <1200000>;
686 regulator-state-mem {
687 regulator-off-in-suspend;
695 broken-cd;
696 non-removable;
697 card-detect-delay = <200>;
698 clock-frequency = <400000000>;
699 samsung,dw-mshc-ciu-div = <0>;
700 samsung,dw-mshc-sdr-timing = <2 3>;
701 samsung,dw-mshc-ddr-timing = <1 2>;
702 mmc-ddr-1_8v;
703 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
704 pinctrl-names = "default";
705 bus-width = <4>;
706 cap-mmc-highspeed;
707 cap-sd-highspeed;
712 pinctrl-names = "default";
713 pinctrl-0 = <&sleep0>;
715 tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
716 samsung,pins = "gpb-5";
717 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
718 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
721 tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
722 samsung,pins = "gpb-7";
723 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
724 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
727 lcd_enable: lcd-enable-pins {
728 samsung,pins = "gpc0-1";
729 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
730 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
733 sleep0: sleep-state {
734 PIN_SLP(gpa0-0, INPUT, NONE);
735 PIN_SLP(gpa0-1, OUT0, NONE);
736 PIN_SLP(gpa0-2, INPUT, NONE);
737 PIN_SLP(gpa0-3, INPUT, UP);
738 PIN_SLP(gpa0-4, INPUT, NONE);
739 PIN_SLP(gpa0-5, INPUT, DOWN);
740 PIN_SLP(gpa0-6, INPUT, DOWN);
741 PIN_SLP(gpa0-7, INPUT, UP);
743 PIN_SLP(gpa1-0, INPUT, DOWN);
744 PIN_SLP(gpa1-1, INPUT, DOWN);
745 PIN_SLP(gpa1-2, INPUT, DOWN);
746 PIN_SLP(gpa1-3, INPUT, DOWN);
747 PIN_SLP(gpa1-4, INPUT, DOWN);
748 PIN_SLP(gpa1-5, INPUT, DOWN);
750 PIN_SLP(gpb-0, INPUT, NONE);
751 PIN_SLP(gpb-1, INPUT, NONE);
752 PIN_SLP(gpb-2, INPUT, NONE);
753 PIN_SLP(gpb-3, INPUT, NONE);
754 PIN_SLP(gpb-4, INPUT, DOWN);
755 PIN_SLP(gpb-5, INPUT, DOWN);
756 PIN_SLP(gpb-6, INPUT, DOWN);
757 PIN_SLP(gpb-7, INPUT, DOWN);
759 PIN_SLP(gpc0-0, INPUT, DOWN);
760 PIN_SLP(gpc0-1, INPUT, DOWN);
761 PIN_SLP(gpc0-2, INPUT, DOWN);
762 PIN_SLP(gpc0-3, INPUT, DOWN);
763 PIN_SLP(gpc0-4, INPUT, DOWN);
765 PIN_SLP(gpc1-0, INPUT, UP);
766 PIN_SLP(gpc1-1, PREV, NONE);
767 PIN_SLP(gpc1-2, INPUT, UP);
768 PIN_SLP(gpc1-3, INPUT, UP);
769 PIN_SLP(gpc1-4, INPUT, UP);
771 PIN_SLP(gpd0-0, INPUT, DOWN);
772 PIN_SLP(gpd0-1, OUT0, NONE);
773 PIN_SLP(gpd0-2, INPUT, NONE);
774 PIN_SLP(gpd0-3, INPUT, NONE);
776 PIN_SLP(gpd1-0, INPUT, DOWN);
777 PIN_SLP(gpd1-1, INPUT, DOWN);
778 PIN_SLP(gpd1-2, INPUT, NONE);
779 PIN_SLP(gpd1-3, INPUT, NONE);
781 PIN_SLP(gpf0-0, OUT0, NONE);
782 PIN_SLP(gpf0-1, OUT0, NONE);
783 PIN_SLP(gpf0-2, OUT0, NONE);
784 PIN_SLP(gpf0-3, OUT0, NONE);
785 PIN_SLP(gpf0-4, OUT0, NONE);
786 PIN_SLP(gpf0-5, OUT0, NONE);
787 PIN_SLP(gpf0-6, OUT0, NONE);
788 PIN_SLP(gpf0-7, OUT0, NONE);
790 PIN_SLP(gpf1-0, OUT0, NONE);
791 PIN_SLP(gpf1-1, OUT0, NONE);
792 PIN_SLP(gpf1-2, OUT0, NONE);
793 PIN_SLP(gpf1-3, OUT0, NONE);
794 PIN_SLP(gpf1-4, OUT0, NONE);
795 PIN_SLP(gpf1-5, OUT0, NONE);
796 PIN_SLP(gpf1-6, OUT0, NONE);
797 PIN_SLP(gpf1-7, OUT0, NONE);
799 PIN_SLP(gpf2-0, OUT0, NONE);
800 PIN_SLP(gpf2-1, OUT0, NONE);
801 PIN_SLP(gpf2-2, OUT0, NONE);
802 PIN_SLP(gpf2-3, OUT0, NONE);
803 PIN_SLP(gpf2-4, OUT0, NONE);
804 PIN_SLP(gpf2-5, OUT0, NONE);
805 PIN_SLP(gpf2-6, OUT0, NONE);
806 PIN_SLP(gpf2-7, OUT0, NONE);
808 PIN_SLP(gpf3-0, OUT0, NONE);
809 PIN_SLP(gpf3-1, OUT0, NONE);
810 PIN_SLP(gpf3-2, OUT0, NONE);
811 PIN_SLP(gpf3-3, OUT0, NONE);
812 PIN_SLP(gpf3-4, OUT0, NONE);
813 PIN_SLP(gpf3-5, OUT0, NONE);
815 PIN_SLP(gpj0-0, INPUT, DOWN);
816 PIN_SLP(gpj0-1, INPUT, DOWN);
817 PIN_SLP(gpj0-2, INPUT, DOWN);
818 PIN_SLP(gpj0-3, PREV, NONE);
819 PIN_SLP(gpj0-4, PREV, NONE);
820 PIN_SLP(gpj0-5, OUT0, NONE);
821 PIN_SLP(gpj0-6, OUT0, NONE);
822 PIN_SLP(gpj0-7, OUT0, NONE);
824 PIN_SLP(gpj1-0, OUT0, NONE);
825 PIN_SLP(gpj1-1, INPUT, DOWN);
826 PIN_SLP(gpj1-2, PREV, NONE);
827 PIN_SLP(gpj1-3, OUT0, NONE);
832 pinctrl-names = "default";
833 pinctrl-0 = <&sleep1>;
835 sd3_wifi: sd3-wifi-pins {
836 samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
837 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
838 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
841 bt_shutdown: bt-shutdown-pins {
842 samsung,pins = "gpl0-6";
843 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
844 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
847 uart_sel: uart-sel-pins {
848 samsung,pins = "gpl2-7";
849 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
850 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
851 samsung,pin-val = <1>;
855 led_bl_reset: led-bl-reset-pins {
856 samsung,pins = "gpm0-1";
857 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
858 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
861 tsp_rst: tsp-rst-pins {
862 samsung,pins = "gpm0-4";
863 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
864 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
867 lvds_nshdn: lvds-nshdn-pins {
868 samsung,pins = "gpm0-5";
869 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
870 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
873 tsp_irq: tsp-irq-pins {
874 samsung,pins = "gpm2-3";
875 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
876 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
879 wifi_reset: wifi-reset-pins {
880 samsung,pins = "gpm3-5";
881 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
882 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
885 tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
886 samsung,pins = "gpm4-5";
887 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
888 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
891 ak8975_irq: ak8975-irq-pins {
892 samsung,pins = "gpm4-7";
893 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
894 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
897 stmpe_adc_irq: stmpe-adc-irq-pins {
898 samsung,pins = "gpx0-1";
899 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
900 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
903 max77686_irq: max77686-irq-pins {
904 samsung,pins = "gpx0-7";
905 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
908 gpio_keys: gpio-keys-pins {
909 samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
910 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
913 fuel_alert_irq: fuel-alert-irq-pins {
914 samsung,pins = "gpx2-3";
915 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
916 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
919 wifi_host_wake: wifi-host-wake-pins {
920 samsung,pins = "gpx2-5";
921 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
922 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
925 bt_host_wakeup: bt-host-wakeup-pins {
926 samsung,pins = "gpx2-6";
927 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
928 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
931 bt_device_wakeup: bt-device-wakeup-pins {
932 samsung,pins = "gpx3-1";
933 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
934 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
937 sdhci2_cd: sdhci2-cd-pins {
938 samsung,pins = "gpx3-4";
939 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
942 sleep1: sleep-state {
943 PIN_SLP(gpk0-0, PREV, NONE);
944 PIN_SLP(gpk0-1, PREV, NONE);
945 PIN_SLP(gpk0-2, PREV, NONE);
946 PIN_SLP(gpk0-3, PREV, NONE);
947 PIN_SLP(gpk0-4, PREV, NONE);
948 PIN_SLP(gpk0-5, PREV, NONE);
949 PIN_SLP(gpk0-6, PREV, NONE);
951 PIN_SLP(gpk1-0, INPUT, DOWN);
952 PIN_SLP(gpk1-1, INPUT, DOWN);
953 PIN_SLP(gpk1-2, INPUT, DOWN);
954 PIN_SLP(gpk1-3, PREV, NONE);
955 PIN_SLP(gpk1-4, PREV, NONE);
956 PIN_SLP(gpk1-5, PREV, NONE);
957 PIN_SLP(gpk1-6, PREV, NONE);
959 PIN_SLP(gpk2-0, INPUT, DOWN);
960 PIN_SLP(gpk2-1, INPUT, DOWN);
961 PIN_SLP(gpk2-2, INPUT, DOWN);
962 PIN_SLP(gpk2-3, INPUT, DOWN);
963 PIN_SLP(gpk2-4, INPUT, DOWN);
964 PIN_SLP(gpk2-5, INPUT, DOWN);
965 PIN_SLP(gpk2-6, INPUT, DOWN);
967 PIN_SLP(gpk3-0, OUT0, NONE);
968 PIN_SLP(gpk3-1, INPUT, NONE);
969 PIN_SLP(gpk3-2, INPUT, DOWN);
970 PIN_SLP(gpk3-3, INPUT, NONE);
971 PIN_SLP(gpk3-4, INPUT, NONE);
972 PIN_SLP(gpk3-5, INPUT, NONE);
973 PIN_SLP(gpk3-6, INPUT, NONE);
975 PIN_SLP(gpl0-0, OUT0, NONE);
976 PIN_SLP(gpl0-1, INPUT, NONE);
977 PIN_SLP(gpl0-2, INPUT, NONE);
978 PIN_SLP(gpl0-3, INPUT, DOWN);
979 PIN_SLP(gpl0-4, PREV, NONE);
980 PIN_SLP(gpl0-6, PREV, NONE);
982 PIN_SLP(gpl1-0, OUT0, NONE);
983 PIN_SLP(gpl1-1, OUT0, NONE);
985 PIN_SLP(gpl2-0, INPUT, DOWN);
986 PIN_SLP(gpl2-1, INPUT, DOWN);
987 PIN_SLP(gpl2-2, INPUT, DOWN);
988 PIN_SLP(gpl2-3, INPUT, DOWN);
989 PIN_SLP(gpl2-4, OUT0, NONE);
990 PIN_SLP(gpl2-5, INPUT, DOWN);
991 PIN_SLP(gpl2-6, PREV, NONE);
992 PIN_SLP(gpl2-7, PREV, NONE);
994 PIN_SLP(gpm0-0, PREV, NONE);
995 PIN_SLP(gpm0-1, OUT0, NONE);
996 PIN_SLP(gpm0-2, INPUT, DOWN);
997 PIN_SLP(gpm0-3, INPUT, NONE);
998 PIN_SLP(gpm0-4, OUT0, NONE);
999 PIN_SLP(gpm0-5, OUT0, NONE);
1000 PIN_SLP(gpm0-6, INPUT, DOWN);
1001 PIN_SLP(gpm0-7, OUT0, NONE);
1003 PIN_SLP(gpm1-0, INPUT, NONE);
1004 PIN_SLP(gpm1-1, INPUT, NONE);
1005 PIN_SLP(gpm1-2, INPUT, NONE);
1006 PIN_SLP(gpm1-3, INPUT, NONE);
1007 PIN_SLP(gpm1-4, INPUT, NONE);
1008 PIN_SLP(gpm1-5, INPUT, NONE);
1009 PIN_SLP(gpm1-6, INPUT, DOWN);
1011 PIN_SLP(gpm2-0, INPUT, NONE);
1012 PIN_SLP(gpm2-1, INPUT, NONE);
1013 PIN_SLP(gpm2-2, OUT0, NONE);
1014 PIN_SLP(gpm2-3, OUT0, DOWN);
1015 PIN_SLP(gpm2-4, INPUT, DOWN);
1017 PIN_SLP(gpm3-0, PREV, NONE);
1018 PIN_SLP(gpm3-1, PREV, NONE);
1019 PIN_SLP(gpm3-2, PREV, NONE);
1020 PIN_SLP(gpm3-3, OUT1, NONE);
1021 PIN_SLP(gpm3-4, OUT0, DOWN);
1022 PIN_SLP(gpm3-5, PREV, NONE);
1023 PIN_SLP(gpm3-6, PREV, NONE);
1024 PIN_SLP(gpm3-7, OUT0, NONE);
1026 PIN_SLP(gpm4-0, INPUT, NONE);
1027 PIN_SLP(gpm4-1, INPUT, NONE);
1028 PIN_SLP(gpm4-2, INPUT, DOWN);
1029 PIN_SLP(gpm4-3, INPUT, DOWN);
1030 PIN_SLP(gpm4-4, PREV, NONE);
1031 PIN_SLP(gpm4-5, OUT0, NONE);
1032 PIN_SLP(gpm4-6, OUT0, NONE);
1033 PIN_SLP(gpm4-7, INPUT, DOWN);
1035 PIN_SLP(gpy0-0, INPUT, DOWN);
1036 PIN_SLP(gpy0-1, INPUT, DOWN);
1037 PIN_SLP(gpy0-2, INPUT, NONE);
1038 PIN_SLP(gpy0-3, INPUT, NONE);
1039 PIN_SLP(gpy0-4, INPUT, NONE);
1040 PIN_SLP(gpy0-5, INPUT, NONE);
1042 PIN_SLP(gpy1-0, INPUT, DOWN);
1043 PIN_SLP(gpy1-1, INPUT, DOWN);
1044 PIN_SLP(gpy1-2, INPUT, DOWN);
1045 PIN_SLP(gpy1-3, INPUT, DOWN);
1047 PIN_SLP(gpy2-0, PREV, NONE);
1048 PIN_SLP(gpy2-1, INPUT, DOWN);
1049 PIN_SLP(gpy2-2, INPUT, NONE);
1050 PIN_SLP(gpy2-3, INPUT, NONE);
1051 PIN_SLP(gpy2-4, INPUT, NONE);
1052 PIN_SLP(gpy2-5, INPUT, NONE);
1054 PIN_SLP(gpy3-0, INPUT, DOWN);
1055 PIN_SLP(gpy3-1, INPUT, DOWN);
1056 PIN_SLP(gpy3-2, INPUT, DOWN);
1057 PIN_SLP(gpy3-3, INPUT, DOWN);
1058 PIN_SLP(gpy3-4, INPUT, DOWN);
1059 PIN_SLP(gpy3-5, INPUT, DOWN);
1060 PIN_SLP(gpy3-6, INPUT, DOWN);
1061 PIN_SLP(gpy3-7, INPUT, DOWN);
1063 PIN_SLP(gpy4-0, INPUT, DOWN);
1064 PIN_SLP(gpy4-1, INPUT, DOWN);
1065 PIN_SLP(gpy4-2, INPUT, DOWN);
1066 PIN_SLP(gpy4-3, INPUT, DOWN);
1067 PIN_SLP(gpy4-4, INPUT, DOWN);
1068 PIN_SLP(gpy4-5, INPUT, DOWN);
1069 PIN_SLP(gpy4-6, INPUT, DOWN);
1070 PIN_SLP(gpy4-7, INPUT, DOWN);
1072 PIN_SLP(gpy5-0, INPUT, DOWN);
1073 PIN_SLP(gpy5-1, INPUT, DOWN);
1074 PIN_SLP(gpy5-2, INPUT, DOWN);
1075 PIN_SLP(gpy5-3, INPUT, DOWN);
1076 PIN_SLP(gpy5-4, INPUT, DOWN);
1077 PIN_SLP(gpy5-5, INPUT, DOWN);
1078 PIN_SLP(gpy5-6, INPUT, DOWN);
1079 PIN_SLP(gpy5-7, INPUT, DOWN);
1081 PIN_SLP(gpy6-0, INPUT, DOWN);
1082 PIN_SLP(gpy6-1, INPUT, DOWN);
1083 PIN_SLP(gpy6-2, INPUT, DOWN);
1084 PIN_SLP(gpy6-3, INPUT, DOWN);
1085 PIN_SLP(gpy6-4, INPUT, DOWN);
1086 PIN_SLP(gpy6-5, INPUT, DOWN);
1087 PIN_SLP(gpy6-6, INPUT, DOWN);
1088 PIN_SLP(gpy6-7, INPUT, DOWN);
1093 pinctrl-names = "default";
1094 pinctrl-0 = <&sleep2>;
1096 sleep2: sleep-state {
1097 PIN_SLP(gpz-0, INPUT, DOWN);
1098 PIN_SLP(gpz-1, INPUT, DOWN);
1099 PIN_SLP(gpz-2, INPUT, DOWN);
1100 PIN_SLP(gpz-3, INPUT, DOWN);
1101 PIN_SLP(gpz-4, INPUT, DOWN);
1102 PIN_SLP(gpz-5, INPUT, DOWN);
1103 PIN_SLP(gpz-6, INPUT, DOWN);
1108 pinctrl-names = "default";
1109 pinctrl-0 = <&sleep3>;
1111 sleep3: sleep-state {
1112 PIN_SLP(gpv0-0, INPUT, DOWN);
1113 PIN_SLP(gpv0-1, INPUT, DOWN);
1114 PIN_SLP(gpv0-2, INPUT, DOWN);
1115 PIN_SLP(gpv0-3, INPUT, DOWN);
1116 PIN_SLP(gpv0-4, INPUT, DOWN);
1117 PIN_SLP(gpv0-5, INPUT, DOWN);
1118 PIN_SLP(gpv0-6, INPUT, DOWN);
1119 PIN_SLP(gpv0-7, INPUT, DOWN);
1121 PIN_SLP(gpv1-0, INPUT, DOWN);
1122 PIN_SLP(gpv1-1, INPUT, DOWN);
1123 PIN_SLP(gpv1-2, INPUT, DOWN);
1124 PIN_SLP(gpv1-3, INPUT, DOWN);
1125 PIN_SLP(gpv1-4, INPUT, DOWN);
1126 PIN_SLP(gpv1-5, INPUT, DOWN);
1127 PIN_SLP(gpv1-6, INPUT, DOWN);
1128 PIN_SLP(gpv1-7, INPUT, DOWN);
1130 PIN_SLP(gpv2-0, INPUT, DOWN);
1131 PIN_SLP(gpv2-1, INPUT, DOWN);
1132 PIN_SLP(gpv2-2, INPUT, DOWN);
1133 PIN_SLP(gpv2-3, INPUT, DOWN);
1134 PIN_SLP(gpv2-4, INPUT, DOWN);
1135 PIN_SLP(gpv2-5, INPUT, DOWN);
1136 PIN_SLP(gpv2-6, INPUT, DOWN);
1137 PIN_SLP(gpv2-7, INPUT, DOWN);
1139 PIN_SLP(gpv3-0, INPUT, DOWN);
1140 PIN_SLP(gpv3-1, INPUT, DOWN);
1141 PIN_SLP(gpv3-2, INPUT, DOWN);
1142 PIN_SLP(gpv3-3, INPUT, DOWN);
1143 PIN_SLP(gpv3-4, INPUT, DOWN);
1144 PIN_SLP(gpv3-5, INPUT, DOWN);
1145 PIN_SLP(gpv3-6, INPUT, DOWN);
1146 PIN_SLP(gpv3-7, INPUT, DOWN);
1148 PIN_SLP(gpv4-0, INPUT, DOWN);
1149 PIN_SLP(gpv4-1, INPUT, DOWN);
1154 assigned-clocks = <&pmu_system_controller 0>;
1155 assigned-clock-parents = <&clock CLK_XUSBXTI>;
1159 pinctrl-0 = <&pwm1_out>;
1160 pinctrl-names = "default";
1161 samsung,pwm-outputs = <1>;
1167 clock-names = "rtc", "rtc_src";
1172 bus-width = <4>;
1173 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1174 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1175 pinctrl-names = "default";
1176 vmmc-supply = <&ldo21_reg>;
1181 #address-cells = <1>;
1182 #size-cells = <0>;
1183 non-removable;
1184 bus-width = <4>;
1185 mmc-pwrseq = <&wlan_pwrseq>;
1187 pinctrl-names = "default";
1188 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>;
1192 compatible = "brcm,bcm4329-fmac";
1194 pinctrl-names = "default";
1195 pinctrl-0 = <&wifi_host_wake>;
1196 interrupt-parent = <&gpx2>;
1198 interrupt-names = "host-wake";
1203 pinctrl-0 = <&uart0_data &uart0_fctl>;
1204 pinctrl-names = "default";
1208 compatible = "brcm,bcm4330-bt";
1209 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1210 pinctrl-names = "default";
1212 max-speed = <2000000>;
1213 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
1214 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
1215 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
1217 clock-names = "lpo";
1222 pinctrl-0 = <&uart_sel>;
1223 pinctrl-names = "default";