Lines Matching +full:2 +full:v_ap
3 * Samsung's Exynos4412 based Trats 2 board device tree source
8 * Device tree source file for Samsung's Trats 2 board which is based on
63 cam_af_reg: voltage-regulator-2 {
74 regulator-name = "VSIL_1.2V";
146 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
173 i2c-gpio,delay-us = <2>;
253 i2c-gpio,delay-us = <2>;
272 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
274 i2c-gpio,delay-us = <2>;
357 pullup-uv = <1800000>; /* VCC_1.8V_AP */
365 pullup-uv = <1800000>; /* VCC_1.8V_AP */
368 io-channels = <&adc 2>; /* Battery temperature */
462 /* Camera C (3) MIPI CSI-2 (CSIS0) */
467 data-lanes = <1 2 3 4>;
482 /* Camera D (4) MIPI CSI-2 (CSIS1) */
625 data-lanes = <1 2 3 4>;
680 #interrupt-cells = <2>;
685 #gpio-cells = <2>;
734 regulator-name = "VALIVE_1.0V_AP";
741 regulator-name = "VM1M2_1.2V_AP";
751 regulator-name = "VCC_1.8V_AP";
758 regulator-name = "VCC_2.8V_AP";
772 regulator-name = "VMPLL_1.0V_AP";
782 regulator-name = "VPLL_1.0V_AP";
801 regulator-name = "CAM_ISP_MIPI_1.2V";
869 regulator-name = "CAM_SENSOR_CORE_1.2V";
903 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
972 regulator-name = "VMEM_1.2V_AP";
996 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
1000 regulator-name = "CAM_ISP_CORE_1.2V";
1029 samsung,dw-mshc-sdr-timing = <2 3>;
1030 samsung,dw-mshc-ddr-timing = <1 2>;
1063 PIN_SLP(gpa0-2, INPUT, NONE);
1072 PIN_SLP(gpa1-2, INPUT, DOWN);
1079 PIN_SLP(gpb-2, INPUT, NONE);
1088 PIN_SLP(gpc0-2, INPUT, DOWN);
1094 PIN_SLP(gpc1-2, INPUT, NONE);
1100 PIN_SLP(gpd0-2, INPUT, NONE);
1105 PIN_SLP(gpd1-2, INPUT, NONE);
1110 PIN_SLP(gpf0-2, INPUT, DOWN);
1119 PIN_SLP(gpf1-2, INPUT, DOWN);
1128 PIN_SLP(gpf2-2, INPUT, DOWN);
1137 PIN_SLP(gpf3-2, PREV, NONE);
1144 PIN_SLP(gpj0-2, PREV, NONE);
1153 PIN_SLP(gpj1-2, PREV, NONE);
1164 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1211 PIN_SLP(gpk0-2, OUT0, NONE);
1219 PIN_SLP(gpk1-2, INPUT, DOWN);
1227 PIN_SLP(gpk2-2, INPUT, DOWN);
1235 PIN_SLP(gpk3-2, INPUT, DOWN);
1243 PIN_SLP(gpl0-2, INPUT, DOWN);
1252 PIN_SLP(gpl2-2, INPUT, DOWN);
1261 PIN_SLP(gpm0-2, INPUT, DOWN);
1270 PIN_SLP(gpm1-2, INPUT, NONE);
1278 PIN_SLP(gpm2-2, INPUT, DOWN);
1284 PIN_SLP(gpm3-2, PREV, NONE);
1293 PIN_SLP(gpm4-2, INPUT, DOWN);
1302 PIN_SLP(gpy0-2, INPUT, DOWN);
1309 PIN_SLP(gpy1-2, INPUT, DOWN);
1314 PIN_SLP(gpy2-2, INPUT, NONE);
1321 PIN_SLP(gpy3-2, INPUT, DOWN);
1330 PIN_SLP(gpy4-2, INPUT, DOWN);
1339 PIN_SLP(gpy5-2, INPUT, DOWN);
1348 PIN_SLP(gpy6-2, INPUT, DOWN);
1364 PIN_SLP(gpz-2, INPUT, DOWN);
1379 PIN_SLP(gpv0-2, INPUT, DOWN);
1388 PIN_SLP(gpv1-2, INPUT, DOWN);
1397 PIN_SLP(gpv2-2, INPUT, DOWN);
1406 PIN_SLP(gpv3-2, INPUT, DOWN);
1499 samsung,spi-feedback-delay = <2>;