Lines Matching +full:pwm +full:- +full:beeper
1 // SPDX-License-Identifier: GPL-2.0
13 /dts-v1/;
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pwm/pwm.h>
16 #include <dt-bindings/sound/samsung-i2s.h>
17 #include "exynos4412-itop-scp-core.dtsi"
21 compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
29 stdout-path = "serial2:115200n8";
33 compatible = "gpio-leds";
39 default-state = "off";
40 linux,default-trigger = "heartbeat";
47 default-state = "off";
51 gpio-keys {
52 compatible = "gpio-keys";
54 key-home {
60 key-back {
66 key-sleep {
72 key-vol-up {
78 key-vol-down {
79 label = "GPIO Key Vol-";
86 compatible = "simple-audio-card";
87 simple-audio-card,name = "wm-sound";
89 simple-audio-card,format = "i2s";
90 simple-audio-card,bitclock-master = <&link0_codec>;
91 simple-audio-card,frame-master = <&link0_codec>;
93 simple-audio-card,widgets =
99 simple-audio-card,routing =
111 simple-audio-card,cpu {
112 sound-dai = <&i2s0 0>;
115 link0_codec: simple-audio-card,codec {
116 sound-dai = <&codec>;
118 system-clock-frequency = <11289600>;
123 compatible = "pwm-beeper";
124 pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
129 vdd-supply = <&ldo3_reg>;
134 pinctrl-0 = <&cam_port_a_clk_active>;
135 pinctrl-names = "default";
137 assigned-clocks = <&clock CLK_MOUT_CAM0>;
138 assigned-clock-parents = <&clock CLK_XUSBXTI>;
142 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
146 assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
148 assigned-clock-rates = <0>, <0>, <112896000>, <11289600>;
154 samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
157 phy-names = "host", "hsic1";
166 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
168 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
169 assigned-clock-rates = <0>, <176000000>;
178 samsung,i2c-sda-delay = <100>;
179 samsung,i2c-slave-addr = <0x10>;
180 samsung,i2c-max-bus-freq = <100000>;
181 pinctrl-0 = <&i2c4_bus>;
182 pinctrl-names = "default";
185 codec: audio-codec@1a {
189 clock-names = "mclk";
190 wlf,shared-lrclk;
191 #sound-dai-cells = <0>;
196 pinctrl-0 = <&i2s0_bus>;
197 pinctrl-names = "default";
202 ether-reset-pins {
203 samsung,pins = "gpc0-1";
204 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
205 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
206 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
210 &pwm {
212 pinctrl-0 = <&pwm0_out>;
213 pinctrl-names = "default";
214 samsung,pwm-outputs = <0>;
218 bus-width = <4>;
219 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
220 pinctrl-names = "default";
221 cd-gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
222 cap-sd-highspeed;
223 vmmc-supply = <&ldo23_reg>;
224 vqmmc-supply = <&ldo17_reg>;