Lines Matching +full:buck5 +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
12 /dts-v1/;
14 #include <dt-bindings/gpio/gpio.h>
19 chassis-type = "handset";
37 stdout-path = "serial2:115200n8";
40 vemmc_reg: regulator-0 {
41 compatible = "regulator-fixed";
42 regulator-name = "VMEM_VDD_2.8V";
43 regulator-min-microvolt = <2800000>;
44 regulator-max-microvolt = <2800000>;
46 enable-active-high;
49 tsp_reg: regulator-1 {
50 compatible = "regulator-fixed";
51 regulator-name = "TSP_FIXED_VOLTAGES";
52 regulator-min-microvolt = <2800000>;
53 regulator-max-microvolt = <2800000>;
55 enable-active-high;
58 cam_af_28v_reg: regulator-2 {
59 compatible = "regulator-fixed";
60 regulator-name = "8M_AF_2.8V_EN";
61 regulator-min-microvolt = <2800000>;
62 regulator-max-microvolt = <2800000>;
64 enable-active-high;
67 cam_io_en_reg: regulator-3 {
68 compatible = "regulator-fixed";
69 regulator-name = "CAM_IO_EN";
70 regulator-min-microvolt = <2800000>;
71 regulator-max-microvolt = <2800000>;
73 enable-active-high;
76 cam_io_12v_reg: regulator-4 {
77 compatible = "regulator-fixed";
78 regulator-name = "8M_1.2V_EN";
79 regulator-min-microvolt = <1200000>;
80 regulator-max-microvolt = <1200000>;
82 enable-active-high;
85 vt_core_15v_reg: regulator-5 {
86 compatible = "regulator-fixed";
87 regulator-name = "VT_CORE_1.5V";
88 regulator-min-microvolt = <1500000>;
89 regulator-max-microvolt = <1500000>;
91 enable-active-high;
94 gpio-keys {
95 compatible = "gpio-keys";
97 vol-down-key {
101 debounce-interval = <10>;
104 vol-up-key {
108 debounce-interval = <10>;
111 power-key {
115 debounce-interval = <10>;
116 wakeup-source;
119 ok-key {
123 debounce-interval = <10>;
127 wlan_pwrseq: sdhci3-pwrseq {
128 compatible = "mmc-pwrseq-simple";
129 reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
132 fixed-rate-clocks {
134 compatible = "samsung,clock-xxti";
135 clock-frequency = <0>;
139 compatible = "samsung,clock-xusbxti";
140 clock-frequency = <24000000>;
143 pmic_ap_clk: pmic-ap-clk {
145 compatible = "fixed-clock";
146 #clock-cells = <0>;
147 clock-frequency = <32768>;
157 cpu0-supply = <&varm_breg>;
161 cooling-maps {
164 cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
168 cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
174 vddcore-supply = <&vusb_reg>;
175 vddio-supply = <&vmipi_reg>;
176 samsung,burst-clock-frequency = <500000000>;
177 samsung,esc-clock-frequency = <20000000>;
178 samsung,pll-clock-frequency = <24000000>;
184 vdd3-supply = <&vcclcd_reg>;
185 vci-supply = <&vlcd_reg>;
186 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
187 power-on-delay = <50>;
188 reset-delay = <100>;
189 init-delay = <100>;
190 flip-horizontal;
191 flip-vertical;
192 panel-width-mm = <58>;
193 panel-height-mm = <103>;
195 display-timings {
196 timing-0 {
197 clock-frequency = <57153600>;
200 hfront-porch = <5>;
201 hback-porch = <5>;
202 hsync-len = <5>;
203 vfront-porch = <13>;
204 vback-porch = <1>;
205 vsync-len = <2>;
213 vbus-supply = <&safe1_sreg>;
218 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
220 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
221 assigned-clock-rates = <0>, <160000000>;
226 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
228 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
229 assigned-clock-rates = <0>, <160000000>;
234 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
236 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
237 assigned-clock-rates = <0>, <160000000>;
242 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
244 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
245 assigned-clock-rates = <0>, <160000000>;
257 vusb_d-supply = <&vusb_reg>;
258 vusb_a-supply = <&vusbdac_reg>;
264 samsung,i2c-sda-delay = <100>;
265 samsung,i2c-slave-addr = <0x10>;
266 samsung,i2c-max-bus-freq = <400000>;
267 pinctrl-0 = <&i2c3_bus>;
268 pinctrl-names = "default";
274 interrupt-parent = <&gpx0>;
276 touchscreen-size-x = <720>;
277 touchscreen-size-y = <1280>;
278 avdd-supply = <&tsp_reg>;
279 vdd-supply = <&tsp_reg>;
284 samsung,i2c-sda-delay = <100>;
285 samsung,i2c-slave-addr = <0x10>;
286 samsung,i2c-max-bus-freq = <100000>;
287 pinctrl-0 = <&i2c5_bus>;
288 pinctrl-names = "default";
292 compatible = "maxim,max8997-pmic";
295 interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
298 max8997,pmic-buck1-uses-gpio-dvs;
299 max8997,pmic-buck2-uses-gpio-dvs;
300 max8997,pmic-buck5-uses-gpio-dvs;
302 max8997,pmic-ignore-gpiodvs-side-effect;
303 max8997,pmic-buck125-default-dvs-idx = <0>;
305 max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
309 max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
314 max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
319 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
326 regulator-name = "VALIVE_1.1V_C210";
327 regulator-min-microvolt = <1100000>;
328 regulator-max-microvolt = <1100000>;
329 regulator-always-on;
333 regulator-name = "VUSB_1.1V_C210";
334 regulator-min-microvolt = <1100000>;
335 regulator-max-microvolt = <1100000>;
339 regulator-name = "VMIPI_1.8V";
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <1800000>;
345 regulator-name = "VCC_1.8V_PDA";
346 regulator-min-microvolt = <1800000>;
347 regulator-max-microvolt = <1800000>;
348 regulator-always-on;
352 regulator-name = "CAM_ISP_1.8V";
353 regulator-min-microvolt = <1800000>;
354 regulator-max-microvolt = <1800000>;
358 regulator-name = "VUSB+VDAC_3.3V_C210";
359 regulator-min-microvolt = <3300000>;
360 regulator-max-microvolt = <3300000>;
364 regulator-name = "VCC_2.8V_PDA";
365 regulator-min-microvolt = <2800000>;
366 regulator-max-microvolt = <2800000>;
367 regulator-always-on;
371 regulator-name = "VPLL_1.1V_C210";
372 regulator-min-microvolt = <1100000>;
373 regulator-max-microvolt = <1100000>;
374 regulator-always-on;
378 regulator-name = "VT_CAM_1.8V";
379 regulator-min-microvolt = <1800000>;
380 regulator-max-microvolt = <1800000>;
384 regulator-name = "VCC_3.3V_LCD";
385 regulator-min-microvolt = <3300000>;
386 regulator-max-microvolt = <3300000>;
390 regulator-name = "VLCD_2.2V";
391 regulator-min-microvolt = <2200000>;
392 regulator-max-microvolt = <2200000>;
396 regulator-name = "CAM_SENSOR_IO_1.8V";
397 regulator-min-microvolt = <1800000>;
398 regulator-max-microvolt = <1800000>;
402 regulator-name = "VTF_2.8V";
403 regulator-min-microvolt = <2800000>;
404 regulator-max-microvolt = <2800000>;
408 regulator-name = "VDDQ_M1M2_1.2V";
409 regulator-min-microvolt = <1200000>;
410 regulator-max-microvolt = <1200000>;
411 regulator-always-on;
415 regulator-name = "VARM_1.2V_C210";
416 regulator-min-microvolt = <900000>;
417 regulator-max-microvolt = <1350000>;
418 regulator-always-on;
422 regulator-name = "VINT_1.1V_C210";
423 regulator-min-microvolt = <900000>;
424 regulator-max-microvolt = <1100000>;
425 regulator-always-on;
429 regulator-name = "CAM_ISP_CORE_1.2V";
430 regulator-min-microvolt = <1200000>;
431 regulator-max-microvolt = <1200000>;
434 vmem_breg: BUCK5 {
435 regulator-name = "VMEM_1.2V_C210";
436 regulator-min-microvolt = <1200000>;
437 regulator-max-microvolt = <1200000>;
438 regulator-always-on;
442 regulator-name = "VCC_SUB_2.0V";
443 regulator-min-microvolt = <2000000>;
444 regulator-max-microvolt = <2000000>;
445 regulator-always-on;
449 regulator-name = "SAFEOUT1";
453 regulator-name = "SAFEOUT2";
454 regulator-boot-on;
458 regulator-name = "EN32KHZ_AP";
459 regulator-always-on;
463 regulator-name = "EN32KHZ_CP";
464 regulator-always-on;
471 bt_shutdown: bt-shutdown-pins {
472 samsung,pins = "gpl1-0";
473 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
474 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
477 bt_host_wakeup: bt-host-wakeup-pins {
478 samsung,pins = "gpx2-6";
479 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
480 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
483 bt_device_wakeup: bt-device-wakeup-pins {
484 samsung,pins = "gpx3-1";
485 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
486 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
493 clock-names = "rtc", "rtc_src";
497 bus-width = <8>;
498 non-removable;
499 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
500 pinctrl-names = "default";
501 vmmc-supply = <&vemmc_reg>;
506 bus-width = <4>;
507 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
508 pinctrl-names = "default";
509 vmmc-supply = <&tflash_reg>;
510 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
517 #address-cells = <1>;
518 #size-cells = <0>;
520 non-removable;
521 bus-width = <4>;
522 mmc-pwrseq = <&wlan_pwrseq>;
523 vmmc-supply = <&tflash_reg>;
525 pinctrl-names = "default";
526 pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
529 compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
532 interrupt-parent = <&gpx2>;
534 interrupt-names = "host-wake";
540 pinctrl-0 = <&uart0_data &uart0_fctl>;
541 pinctrl-names = "default";
544 compatible = "brcm,bcm4330-bt";
545 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
546 pinctrl-names = "default";
547 shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
548 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
549 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;