Lines Matching +full:down +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
12 /dts-v1/;
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/clock/samsung,s2mps11.h>
34 compatible = "samsung,secure-firmware";
38 gpio-keys {
39 compatible = "gpio-keys";
41 power-key {
42 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
45 debounce-interval = <10>;
46 wakeup-source;
50 vemmc_reg: voltage-regulator-0 {
51 compatible = "regulator-fixed";
52 regulator-name = "V_EMMC_2.8V-fixed";
53 regulator-min-microvolt = <2800000>;
54 regulator-max-microvolt = <2800000>;
56 enable-active-high;
59 i2c_max77836: i2c-gpio-0 {
60 compatible = "i2c-gpio";
61 sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
62 scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
63 #address-cells = <1>;
64 #size-cells = <0>;
68 interrupt-parent = <&gpx1>;
71 wakeup-source;
74 compatible = "maxim,max77836-muic";
78 compatible = "maxim,max77836-regulator";
80 regulator-name = "SAFEOUT";
84 regulator-name = "CHARGER";
85 regulator-min-microamp = <45000>;
86 regulator-max-microamp = <475000>;
87 regulator-boot-on;
91 regulator-name = "MOT_2.7V";
92 regulator-min-microvolt = <1100000>;
93 regulator-max-microvolt = <2700000>;
97 regulator-name = "UNUSED_LDO2";
98 regulator-min-microvolt = <800000>;
99 regulator-max-microvolt = <3950000>;
104 compatible = "maxim,max77836-charger";
106 maxim,constant-uvolt = <4350000>;
107 maxim,fast-charge-uamp = <225000>;
108 maxim,eoc-uamp = <7500>;
109 maxim,ovp-uvolt = <6500000>;
115 compatible = "regulator-haptic";
116 haptic-supply = <&motor_reg>;
117 min-microvolt = <1100000>;
118 max-microvolt = <2700000>;
121 thermal-zones {
122 cpu_thermal: cpu-thermal {
123 cooling-maps {
126 cooling-device = <&cpu0 5 5>,
131 cooling-device = <&cpu0 8 8>,
140 vdd-supply = <&ldo3_reg>;
142 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
143 assigned-clock-rates = <6000000>;
145 thermistor-ap {
147 pullup-uv = <1800000>;
148 pullup-ohm = <100000>;
149 pulldown-ohm = <100000>;
150 io-channels = <&adc 0>;
153 thermistor-battery {
155 pullup-uv = <1800000>;
156 pullup-ohm = <100000>;
157 pulldown-ohm = <100000>;
158 io-channels = <&adc 1>;
163 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
164 vdd-supply = <&buck1_reg>;
173 cpu0-supply = <&buck2_reg>;
177 vbus-supply = <&safeout_reg>;
182 mali-supply = <&buck3_reg>;
187 vusb_d-supply = <&ldo15_reg>;
188 vusb_a-supply = <&ldo12_reg>;
194 #address-cells = <1>;
195 #size-cells = <0>;
196 samsung,i2c-sda-delay = <100>;
197 samsung,i2c-slave-addr = <0x10>;
198 samsung,i2c-max-bus-freq = <100000>;
202 compatible = "samsung,s2mps14-pmic";
203 interrupt-parent = <&gpx0>;
206 wakeup-source;
209 compatible = "samsung,s2mps14-clk";
210 #clock-cells = <1>;
211 clock-output-names = "s2mps14_ap", "unused",
217 regulator-name = "VAP_ALIVE_1.0V";
218 regulator-min-microvolt = <1000000>;
219 regulator-max-microvolt = <1000000>;
220 regulator-always-on;
224 regulator-name = "VAP_M1_1.2V";
225 regulator-min-microvolt = <1200000>;
226 regulator-max-microvolt = <1200000>;
227 regulator-always-on;
231 regulator-name = "VCC_AP_1.8V";
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <1800000>;
234 regulator-always-on;
238 regulator-name = "VAP_AVDD_PLL1";
239 regulator-min-microvolt = <1800000>;
240 regulator-max-microvolt = <1800000>;
241 regulator-always-on;
245 regulator-name = "VAP_PLL_ISO_1.0V";
246 regulator-min-microvolt = <1000000>;
247 regulator-max-microvolt = <1000000>;
248 regulator-always-on;
252 regulator-name = "VAP_MIPI_1.0V";
253 regulator-min-microvolt = <1000000>;
254 regulator-max-microvolt = <1000000>;
258 regulator-name = "VAP_AVDD_1.8V";
259 regulator-min-microvolt = <1800000>;
260 regulator-max-microvolt = <1800000>;
261 regulator-always-on;
265 regulator-name = "VAP_USB_3.0V";
266 regulator-min-microvolt = <3000000>;
267 regulator-max-microvolt = <3000000>;
268 regulator-always-on;
272 regulator-name = "V_LPDDR_1.2V";
273 regulator-min-microvolt = <1200000>;
274 regulator-max-microvolt = <1200000>;
275 regulator-always-on;
279 regulator-name = "UNUSED_LDO10";
280 regulator-min-microvolt = <1000000>;
281 regulator-max-microvolt = <1000000>;
285 regulator-name = "V_EMMC_1.8V";
286 regulator-min-microvolt = <1800000>;
287 regulator-max-microvolt = <1800000>;
288 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
292 regulator-name = "V_EMMC_2.8V";
293 regulator-min-microvolt = <2800000>;
294 regulator-max-microvolt = <2800000>;
295 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
299 regulator-name = "VSENSOR_2.85V";
300 regulator-min-microvolt = <2850000>;
301 regulator-max-microvolt = <2850000>;
302 regulator-always-on;
306 regulator-name = "UNUSED_LDO14";
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <1800000>;
312 regulator-name = "TSP_AVDD_3.3V";
313 regulator-min-microvolt = <3300000>;
314 regulator-max-microvolt = <3300000>;
318 regulator-name = "LCD_VDD_3.3V";
319 regulator-min-microvolt = <3300000>;
320 regulator-max-microvolt = <3300000>;
324 regulator-name = "UNUSED_LDO17";
325 regulator-min-microvolt = <1800000>;
326 regulator-max-microvolt = <1800000>;
330 regulator-name = "UNUSED_LDO18";
331 regulator-min-microvolt = <1800000>;
332 regulator-max-microvolt = <1800000>;
336 regulator-name = "TSP_VDD_1.8V";
337 regulator-min-microvolt = <1800000>;
338 regulator-max-microvolt = <1800000>;
342 regulator-name = "LCD_VDD_1.8V";
343 regulator-min-microvolt = <1800000>;
344 regulator-max-microvolt = <1800000>;
348 regulator-name = "UNUSED_LDO21";
349 regulator-min-microvolt = <1000000>;
350 regulator-max-microvolt = <1000000>;
354 regulator-name = "UNUSED_LDO22";
355 regulator-min-microvolt = <1000000>;
356 regulator-max-microvolt = <1000000>;
360 regulator-name = "UNUSED_LDO23";
361 regulator-min-microvolt = <1000000>;
362 regulator-max-microvolt = <1000000>;
363 regulator-always-on;
367 regulator-name = "UNUSED_LDO24";
368 regulator-min-microvolt = <1800000>;
369 regulator-max-microvolt = <1800000>;
373 regulator-name = "UNUSED_LDO25";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
379 regulator-name = "VAP_MIF_1.0V";
380 regulator-min-microvolt = <800000>;
381 regulator-max-microvolt = <900000>;
382 regulator-always-on;
386 regulator-name = "VAP_ARM_1.0V";
387 regulator-min-microvolt = <850000>;
388 regulator-max-microvolt = <1150000>;
389 regulator-always-on;
393 regulator-name = "VAP_INT3D_1.0V";
394 regulator-min-microvolt = <850000>;
395 regulator-max-microvolt = <1000000>;
396 regulator-always-on;
400 regulator-name = "VCC_SUB_1.95V";
401 regulator-min-microvolt = <1950000>;
402 regulator-max-microvolt = <1950000>;
403 regulator-always-on;
407 regulator-name = "VCC_SUB_1.35V";
408 regulator-min-microvolt = <1350000>;
409 regulator-max-microvolt = <1350000>;
410 regulator-always-on;
417 #address-cells = <1>;
418 #size-cells = <0>;
419 samsung,i2c-sda-delay = <100>;
420 samsung,i2c-slave-addr = <0x10>;
421 samsung,i2c-max-bus-freq = <400000>;
425 compatible = "maxim,max77836-battery";
426 interrupt-parent = <&gpx1>;
437 #address-cells = <1>;
438 #size-cells = <0>;
439 broken-cd;
440 non-removable;
441 cap-mmc-highspeed;
442 mmc-hs200-1_8v;
443 card-detect-delay = <200>;
444 vmmc-supply = <&vemmc_reg>;
445 clock-frequency = <100000000>;
446 max-frequency = <100000000>;
447 mmc-ddr-1_8v;
448 samsung,dw-mshc-ciu-div = <1>;
449 samsung,dw-mshc-sdr-timing = <0 1>;
450 samsung,dw-mshc-ddr-timing = <1 2>;
451 pinctrl-names = "default";
452 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
453 bus-width = <8>;
458 assigned-clocks = <&cmu CLK_SCLK_UART0>;
459 assigned-clock-rates = <100000000>;
468 vtmu-supply = <&ldo7_reg>;
474 clock-names = "rtc", "rtc_src";
479 clock-frequency = <24000000>;
483 pinctrl-names = "default";
484 pinctrl-0 = <&sleep0>;
486 sleep0: sleep-state {
487 PIN_SLP(gpa0-0, INPUT, DOWN);
488 PIN_SLP(gpa0-1, INPUT, DOWN);
489 PIN_SLP(gpa0-2, INPUT, DOWN);
490 PIN_SLP(gpa0-3, INPUT, DOWN);
491 PIN_SLP(gpa0-4, INPUT, DOWN);
492 PIN_SLP(gpa0-5, INPUT, DOWN);
493 PIN_SLP(gpa0-6, INPUT, DOWN);
494 PIN_SLP(gpa0-7, INPUT, DOWN);
496 PIN_SLP(gpa1-0, INPUT, DOWN);
497 PIN_SLP(gpa1-1, INPUT, DOWN);
498 PIN_SLP(gpa1-2, INPUT, DOWN);
499 PIN_SLP(gpa1-3, INPUT, DOWN);
500 PIN_SLP(gpa1-4, INPUT, DOWN);
501 PIN_SLP(gpa1-5, INPUT, DOWN);
503 PIN_SLP(gpb-0, PREV, NONE);
504 PIN_SLP(gpb-1, PREV, NONE);
505 PIN_SLP(gpb-2, PREV, NONE);
506 PIN_SLP(gpb-3, PREV, NONE);
507 PIN_SLP(gpb-4, INPUT, DOWN);
508 PIN_SLP(gpb-5, INPUT, DOWN);
509 PIN_SLP(gpb-6, INPUT, DOWN);
510 PIN_SLP(gpb-7, INPUT, DOWN);
512 PIN_SLP(gpc0-0, INPUT, DOWN);
513 PIN_SLP(gpc0-1, INPUT, DOWN);
514 PIN_SLP(gpc0-2, INPUT, DOWN);
515 PIN_SLP(gpc0-3, INPUT, DOWN);
516 PIN_SLP(gpc0-4, INPUT, DOWN);
518 PIN_SLP(gpc1-0, INPUT, DOWN);
519 PIN_SLP(gpc1-1, INPUT, DOWN);
520 PIN_SLP(gpc1-2, INPUT, DOWN);
521 PIN_SLP(gpc1-3, INPUT, DOWN);
522 PIN_SLP(gpc1-4, INPUT, DOWN);
524 PIN_SLP(gpd0-0, INPUT, DOWN);
525 PIN_SLP(gpd0-1, INPUT, DOWN);
526 PIN_SLP(gpd0-2, INPUT, NONE);
527 PIN_SLP(gpd0-3, INPUT, NONE);
529 PIN_SLP(gpd1-0, INPUT, NONE);
530 PIN_SLP(gpd1-1, INPUT, NONE);
531 PIN_SLP(gpd1-2, INPUT, NONE);
532 PIN_SLP(gpd1-3, INPUT, NONE);
537 pinctrl-names = "default";
538 pinctrl-0 = <&initial1 &sleep1>;
540 initial1: initial-state {
541 PIN_IN(gpk2-0, DOWN, LV1);
542 PIN_IN(gpk2-1, DOWN, LV1);
543 PIN_IN(gpk2-2, DOWN, LV1);
544 PIN_IN(gpk2-3, DOWN, LV1);
545 PIN_IN(gpk2-4, DOWN, LV1);
546 PIN_IN(gpk2-5, DOWN, LV1);
547 PIN_IN(gpk2-6, DOWN, LV1);
550 sleep1: sleep-state {
551 PIN_SLP(gpe0-0, PREV, NONE);
552 PIN_SLP(gpe0-1, PREV, NONE);
553 PIN_SLP(gpe0-2, INPUT, DOWN);
554 PIN_SLP(gpe0-3, INPUT, DOWN);
555 PIN_SLP(gpe0-4, PREV, NONE);
556 PIN_SLP(gpe0-5, INPUT, DOWN);
557 PIN_SLP(gpe0-6, INPUT, DOWN);
558 PIN_SLP(gpe0-7, INPUT, DOWN);
560 PIN_SLP(gpe1-0, INPUT, DOWN);
561 PIN_SLP(gpe1-1, PREV, NONE);
562 PIN_SLP(gpe1-2, INPUT, DOWN);
563 PIN_SLP(gpe1-3, INPUT, DOWN);
564 PIN_SLP(gpe1-4, INPUT, DOWN);
565 PIN_SLP(gpe1-5, INPUT, DOWN);
566 PIN_SLP(gpe1-6, INPUT, DOWN);
567 PIN_SLP(gpe1-7, INPUT, NONE);
569 PIN_SLP(gpe2-0, INPUT, NONE);
570 PIN_SLP(gpe2-1, INPUT, NONE);
571 PIN_SLP(gpe2-2, INPUT, NONE);
573 PIN_SLP(gpk0-0, INPUT, DOWN);
574 PIN_SLP(gpk0-1, INPUT, DOWN);
575 PIN_SLP(gpk0-2, OUT0, NONE);
576 PIN_SLP(gpk0-3, INPUT, DOWN);
577 PIN_SLP(gpk0-4, INPUT, DOWN);
578 PIN_SLP(gpk0-5, INPUT, DOWN);
579 PIN_SLP(gpk0-6, INPUT, DOWN);
580 PIN_SLP(gpk0-7, INPUT, DOWN);
582 PIN_SLP(gpk1-0, PREV, NONE);
583 PIN_SLP(gpk1-1, PREV, NONE);
584 PIN_SLP(gpk1-2, INPUT, DOWN);
585 PIN_SLP(gpk1-3, PREV, NONE);
586 PIN_SLP(gpk1-4, PREV, NONE);
587 PIN_SLP(gpk1-5, PREV, NONE);
588 PIN_SLP(gpk1-6, PREV, NONE);
590 PIN_SLP(gpk2-0, INPUT, DOWN);
591 PIN_SLP(gpk2-1, INPUT, DOWN);
592 PIN_SLP(gpk2-2, INPUT, DOWN);
593 PIN_SLP(gpk2-3, INPUT, DOWN);
594 PIN_SLP(gpk2-4, INPUT, DOWN);
595 PIN_SLP(gpk2-5, INPUT, DOWN);
596 PIN_SLP(gpk2-6, INPUT, DOWN);
598 PIN_SLP(gpl0-0, INPUT, DOWN);
599 PIN_SLP(gpl0-1, INPUT, DOWN);
600 PIN_SLP(gpl0-2, INPUT, DOWN);
601 PIN_SLP(gpl0-3, INPUT, DOWN);
603 PIN_SLP(gpm0-0, INPUT, DOWN);
604 PIN_SLP(gpm0-1, INPUT, DOWN);
605 PIN_SLP(gpm0-2, INPUT, DOWN);
606 PIN_SLP(gpm0-3, INPUT, DOWN);
607 PIN_SLP(gpm0-4, INPUT, DOWN);
608 PIN_SLP(gpm0-5, INPUT, DOWN);
609 PIN_SLP(gpm0-6, INPUT, DOWN);
610 PIN_SLP(gpm0-7, INPUT, DOWN);
612 PIN_SLP(gpm1-0, INPUT, DOWN);
613 PIN_SLP(gpm1-1, INPUT, DOWN);
614 PIN_SLP(gpm1-2, INPUT, DOWN);
615 PIN_SLP(gpm1-3, INPUT, DOWN);
616 PIN_SLP(gpm1-4, INPUT, DOWN);
617 PIN_SLP(gpm1-5, INPUT, DOWN);
618 PIN_SLP(gpm1-6, INPUT, DOWN);
620 PIN_SLP(gpm2-0, INPUT, DOWN);
621 PIN_SLP(gpm2-1, INPUT, DOWN);
622 PIN_SLP(gpm2-2, INPUT, DOWN);
623 PIN_SLP(gpm2-3, INPUT, DOWN);
624 PIN_SLP(gpm2-4, INPUT, DOWN);
626 PIN_SLP(gpm3-0, INPUT, DOWN);
627 PIN_SLP(gpm3-1, INPUT, DOWN);
628 PIN_SLP(gpm3-2, INPUT, DOWN);
629 PIN_SLP(gpm3-3, INPUT, DOWN);
630 PIN_SLP(gpm3-4, INPUT, DOWN);
631 PIN_SLP(gpm3-5, INPUT, DOWN);
632 PIN_SLP(gpm3-6, INPUT, DOWN);
633 PIN_SLP(gpm3-7, INPUT, DOWN);
635 PIN_SLP(gpm4-0, INPUT, DOWN);
636 PIN_SLP(gpm4-1, INPUT, DOWN);
637 PIN_SLP(gpm4-2, INPUT, DOWN);
638 PIN_SLP(gpm4-3, INPUT, DOWN);
639 PIN_SLP(gpm4-4, INPUT, DOWN);
640 PIN_SLP(gpm4-5, INPUT, DOWN);
641 PIN_SLP(gpm4-6, INPUT, DOWN);
642 PIN_SLP(gpm4-7, INPUT, DOWN);