Lines Matching +full:ec +full:- +full:pwm

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "rk3288-veyron-chromebook.dtsi"
11 #include "../cros-ec-sbs.dtsi"
15 	compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
16 		     "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
17 		     "google,veyron-jaq-rev1", "google,veyron-jaq",
22 	/* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
23 	brightness-levels = <8 255>;
24 	num-interpolated-steps = <247>;
28 	pinctrl-names = "default";
29 	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
30 	dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
35 			regulator-name = "mic_vcc";
36 			regulator-always-on;
37 			regulator-boot-on;
38 			regulator-min-microvolt = <1800000>;
39 			regulator-max-microvolt = <1800000>;
40 			regulator-state-mem {
41 				regulator-off-in-suspend;
48 	#address-cells = <1>;
49 	#size-cells = <0>;
52 		compatible = "marvell,sd8897-bt";
54 		interrupt-parent = <&gpio4>;
56 		marvell,wakeup-pin = /bits/ 16 <13>;
57 		pinctrl-names = "default";
58 		pinctrl-0 = <&bt_host_wake_l>;
63 	disable-wp;
64 	pinctrl-names = "default";
65 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
70 	enable-active-high;
72 	pinctrl-names = "default";
73 	pinctrl-0 = <&drv_5v>;
77 	enable-active-high;
79 	pinctrl-names = "default";
80 	pinctrl-0 = <&vcc50_hdmi_en>;
84 	gpio-line-names = "PMIC_SLEEP_AP",
112 	gpio-line-names = "CONFIG0",
130 	gpio-line-names = "FLASH0_D0",
154 	gpio-line-names = "",
192 	gpio-line-names = "",
217 	gpio-line-names = "I2S0_SCLK",
244 	gpio-line-names = "LCDC_BL",
277 	gpio-line-names = "RAM_ID0",
291 	pinctrl-names = "default", "sleep";
292 	pinctrl-0 = <
302 	pinctrl-1 = <
313 	buck-5v {
314 		drv_5v: drv-5v {
320 		vcc50_hdmi_en: vcc50-hdmi-en {
326 		dvs_1: dvs-1 {
330 		dvs_2: dvs-2 {