Lines Matching +full:vdd33a +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
24 stdout-path = "serial0:115200n8";
32 d1_8v: regulator-1v8 {
33 compatible = "regulator-fixed";
34 regulator-name = "D1.8V";
35 regulator-min-microvolt = <1800000>;
36 regulator-max-microvolt = <1800000>;
37 regulator-boot-on;
38 regulator-always-on;
41 d3_3v: regulator-3v3 {
42 compatible = "regulator-fixed";
43 regulator-name = "D3.3V";
44 regulator-min-microvolt = <3300000>;
45 regulator-max-microvolt = <3300000>;
46 regulator-boot-on;
47 regulator-always-on;
51 compatible = "gpio-keys";
53 key-a {
56 wakeup-source;
57 debounce-interval = <20>;
60 key-b {
63 wakeup-source;
64 debounce-interval = <20>;
69 vcc_sdhi0: regulator-vcc-sdhi0 {
70 compatible = "regulator-fixed";
72 regulator-name = "SDHI0 Vcc";
73 regulator-min-microvolt = <3300000>;
74 regulator-max-microvolt = <3300000>;
77 enable-active-high;
80 hdmi-out0 {
81 compatible = "hdmi-connector";
86 remote-endpoint = <&adv7513_0_out>;
91 hdmi-out1 {
92 compatible = "hdmi-connector";
97 remote-endpoint = <&adv7513_1_out>;
103 compatible = "fixed-clock";
104 #clock-cells = <0>;
105 clock-frequency = <74250000>;
110 clock-frequency = <20000000>;
117 phy-mode = "mii";
118 interrupt-parent = <&irqc>;
120 smsc,irq-push-pull;
121 smsc,save-mac-address;
122 reg-io-width = <4>;
123 vddvario-supply = <&d3_3v>;
124 vdd33a-supply = <&d3_3v>;
126 pinctrl-0 = <&lan89218_pins>;
127 pinctrl-names = "default";
180 timeout-sec = <60>;
185 pinctrl-0 = <&scif0_pins>;
186 pinctrl-names = "default";
192 pinctrl-0 = <&can0_pins>;
193 pinctrl-names = "default";
199 pinctrl-0 = <&can1_pins>;
200 pinctrl-names = "default";
206 pinctrl-0 = <&sdhi0_pins>;
207 pinctrl-names = "default";
209 vmmc-supply = <&vcc_sdhi0>;
210 cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
215 pinctrl-0 = <&qspi_pins>;
216 pinctrl-names = "default";
220 compatible = "spansion,s25fl512s", "jedec,spi-nor";
222 spi-max-frequency = <30000000>;
223 spi-tx-bus-width = <4>;
224 spi-rx-bus-width = <4>;
225 spi-cpol;
226 spi-cpha;
227 m25p,fast-read;
230 compatible = "fixed-partitions";
231 #address-cells = <1>;
232 #size-cells = <1>;
237 read-only;
242 read-only;
254 clock-frequency = <400000>;
264 reg-names = "main", "edid", "cec", "packet";
266 avdd-supply = <&d1_8v>;
267 dvdd-supply = <&d1_8v>;
268 pvdd-supply = <&d1_8v>;
269 dvdd-3v-supply = <&d3_3v>;
270 bgvdd-supply = <&d1_8v>;
272 adi,input-depth = <8>;
273 adi,input-colorspace = "rgb";
274 adi,input-clock = "1x";
277 #address-cells = <1>;
278 #size-cells = <0>;
283 remote-endpoint = <&du_out_rgb0>;
290 remote-endpoint = <&hdmi_con0>;
299 reg-names = "main", "edid", "cec", "packet";
301 avdd-supply = <&d1_8v>;
302 dvdd-supply = <&d1_8v>;
303 pvdd-supply = <&d1_8v>;
304 dvdd-3v-supply = <&d3_3v>;
305 bgvdd-supply = <&d1_8v>;
307 adi,input-depth = <8>;
308 adi,input-colorspace = "rgb";
309 adi,input-clock = "1x";
312 #address-cells = <1>;
313 #size-cells = <0>;
318 remote-endpoint = <&du_out_rgb1>;
325 remote-endpoint = <&hdmi_con1>;
333 pinctrl-0 = <&du0_pins>, <&du1_pins>;
334 pinctrl-names = "default";
337 clock-names = "du.0", "du.1", "dclkin.0";
343 remote-endpoint = <&adv7513_0_in>;
348 remote-endpoint = <&adv7513_1_in>;