Lines Matching +full:vddvario +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
25 stdout-path = "serial0:115200n8";
33 d1_8v: regulator-1v8 {
34 compatible = "regulator-fixed";
35 regulator-name = "D1.8V";
36 regulator-min-microvolt = <1800000>;
37 regulator-max-microvolt = <1800000>;
38 regulator-boot-on;
39 regulator-always-on;
42 d3_3v: regulator-3v3 {
43 compatible = "regulator-fixed";
44 regulator-name = "D3.3V";
45 regulator-min-microvolt = <3300000>;
46 regulator-max-microvolt = <3300000>;
47 regulator-boot-on;
48 regulator-always-on;
51 vga-encoder {
55 #address-cells = <1>;
56 #size-cells = <0>;
61 remote-endpoint = <&du_out_rgb1>;
67 remote-endpoint = <&vga_in>;
73 hdmi-out {
74 compatible = "hdmi-connector";
79 remote-endpoint = <&adv7511_out>;
85 compatible = "vga-connector";
89 remote-endpoint = <&adv7123_out>;
95 compatible = "fixed-clock";
96 #clock-cells = <0>;
97 clock-frequency = <74250000>;
101 compatible = "fixed-clock";
102 #clock-cells = <0>;
103 clock-frequency = <65000000>;
107 compatible = "gpio-keys";
109 pinctrl-0 = <&keyboard_pins>;
110 pinctrl-names = "default";
112 key-1 {
114 label = "SW2-1";
115 wakeup-source;
116 debounce-interval = <20>;
119 key-2 {
121 label = "SW2-2";
122 wakeup-source;
123 debounce-interval = <20>;
126 key-3 {
128 label = "SW2-3";
129 wakeup-source;
130 debounce-interval = <20>;
133 key-4 {
135 label = "SW2-4";
136 wakeup-source;
137 debounce-interval = <20>;
140 key-a {
143 wakeup-source;
144 debounce-interval = <20>;
147 key-b {
150 wakeup-source;
151 debounce-interval = <20>;
157 compatible = "gpio-leds";
173 vcc_sdhi0: regulator-vcc-sdhi0 {
174 compatible = "regulator-fixed";
176 regulator-name = "SDHI0 Vcc";
177 regulator-min-microvolt = <3300000>;
178 regulator-max-microvolt = <3300000>;
181 enable-active-high;
186 clock-frequency = <20000000>;
190 clock-frequency = <48000000>;
195 compatible = "cfi-flash";
197 pinctrl-0 = <&flash_pins>;
198 pinctrl-names = "default";
199 bank-width = <2>;
202 compatible = "fixed-partitions";
203 #address-cells = <1>;
204 #size-cells = <1>;
209 read-only;
212 label = "uboot-env";
214 read-only;
226 phy-mode = "mii";
227 interrupt-parent = <&irqc>;
229 smsc,irq-push-pull;
230 reg-io-width = <4>;
231 vddvario-supply = <&d3_3v>;
232 vdd33a-supply = <&d3_3v>;
234 pinctrl-0 = <&lan89218_pins>;
235 pinctrl-names = "default";
288 bias-pull-up;
298 timeout-sec = <60>;
303 pinctrl-0 = <&scif0_pins>;
304 pinctrl-names = "default";
310 pinctrl-0 = <&scif3_pins>;
311 pinctrl-names = "default";
317 pinctrl-0 = <&can0_pins>;
318 pinctrl-names = "default";
324 pinctrl-0 = <&sdhi0_pins>;
325 pinctrl-names = "default";
327 vmmc-supply = <&vcc_sdhi0>;
328 cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
334 clock-frequency = <400000>;
339 interrupt-parent = <&irqc>;
342 avdd-supply = <&d1_8v>;
343 dvdd-supply = <&d1_8v>;
344 pvdd-supply = <&d1_8v>;
345 dvdd-3v-supply = <&d3_3v>;
346 bgvdd-supply = <&d1_8v>;
348 adi,input-depth = <8>;
349 adi,input-colorspace = "rgb";
350 adi,input-clock = "1x";
353 #address-cells = <1>;
354 #size-cells = <0>;
359 remote-endpoint = <&du_out_rgb0>;
366 remote-endpoint = <&hdmi_con>;
379 pinctrl-names = "default";
380 pinctrl-0 = <&pmic_irq_pins>;
381 interrupt-parent = <&irqc>;
383 interrupt-controller;
384 #interrupt-cells = <2>;
387 compatible = "dlg,da9063-rtc";
391 compatible = "dlg,da9063-watchdog";
397 pinctrl-0 = <&du0_pins>, <&du1_pins>;
398 pinctrl-names = "default";
401 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
407 remote-endpoint = <&adv7511_in>;
412 remote-endpoint = <&adv7123_in>;