Lines Matching +full:stmpe +full:- +full:adc
1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the iWave-RZG1E SODIMM carrier board
9 * SSI-SGTL5000
31 /dts-v1/;
32 #include "r8a7745-iwg22m.dtsi"
33 #include <dt-bindings/pwm/pwm.h>
36 model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
47 stdout-path = "serial3:115200n8";
51 compatible = "fixed-clock";
52 #clock-cells = <0>;
53 clock-frequency = <26000000>;
57 compatible = "pwm-backlight";
59 brightness-levels = <0 4 8 16 32 64 128 255>;
60 default-brightness-level = <7>;
65 power-supply = <&vccq_panel>;
70 remote-endpoint = <&du_out_rgb0>;
75 vccq_panel: regulator-vccq-panel {
76 compatible = "regulator-fixed";
77 regulator-name = "Panel VccQ";
78 regulator-min-microvolt = <3300000>;
79 regulator-max-microvolt = <3300000>;
81 enable-active-high;
84 vccq_sdhi0: regulator-vccq-sdhi0 {
85 compatible = "regulator-gpio";
87 regulator-name = "SDHI0 VccQ";
88 regulator-min-microvolt = <1800000>;
89 regulator-max-microvolt = <3300000>;
92 gpios-states = <1>;
97 compatible = "simple-audio-card";
98 simple-audio-card,format = "i2s";
99 simple-audio-card,bitclock-master = <&sndcodec>;
100 simple-audio-card,frame-master = <&sndcodec>;
102 sndcpu: simple-audio-card,cpu {
103 sound-dai = <&rcar_sound>;
106 sndcodec: simple-audio-card,codec {
107 sound-dai = <&sgtl5000>;
113 pinctrl-0 = <&avb_pins>;
114 pinctrl-names = "default";
116 phy-handle = <&phy3>;
117 phy-mode = "gmii";
118 renesas,no-ether-link;
121 phy3: ethernet-phy@3 {
126 compatible = "ethernet-phy-id0022.1622",
127 "ethernet-phy-ieee802.3-c22";
129 micrel,led-mode = <1>;
134 pinctrl-0 = <&can0_pins>;
135 pinctrl-names = "default";
141 pinctrl-0 = <&du0_pins>;
142 pinctrl-names = "default";
149 remote-endpoint = <&lcd_in>;
156 pinctrl-0 = <&hscif1_pins>;
157 pinctrl-names = "default";
159 uart-has-rtscts;
165 pinctrl-0 = <&usb0_pins>;
166 pinctrl-names = "default";
170 pinctrl-0 = <&i2c5_pins>;
171 pinctrl-names = "default";
174 clock-frequency = <400000>;
178 #sound-dai-cells = <0>;
181 VDDA-supply = <®_3p3v>;
182 VDDIO-supply = <®_3p3v>;
185 port-expander@44 {
188 interrupt-parent = <&gpio4>;
191 /* 3.25 MHz ADC clock speed */
192 st,adc-freq = <1>;
193 /* ADC conversion time: 80 clocks */
194 st,sample-time = <4>;
195 /* 12-bit ADC */
196 st,mod-12b = <1>;
197 /* internal ADC reference */
198 st,ref-sel = <0>;
201 compatible = "st,stmpe-ts";
203 st,ave-ctrl = <3>;
205 st,fraction-z = <7>;
210 st,i-drive = <1>;
214 st,touch-det-delay = <5>;
221 pinctrl-0 = <&usb1_pins>;
222 pinctrl-names = "default";
264 power-source = <3300>;
284 pinctrl-0 = <&sound_pins>;
285 pinctrl-names = "default";
290 #sound-dai-cells = <0>;
301 pinctrl-0 = <&scif4_pins>;
302 pinctrl-names = "default";
308 pinctrl-0 = <&sdhi0_pins>;
309 pinctrl-names = "default";
311 vmmc-supply = <®_3p3v>;
312 vqmmc-supply = <&vccq_sdhi0>;
313 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
318 shared-pin;
322 pinctrl-0 = <&backlight_pins>;
323 pinctrl-names = "default";