Lines Matching +full:disable +full:- +full:leds

1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-ipq8064.dtsi"
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/leds/common.h>
7 	model = "MikroTik RB3011UiAS-RM";
14 		mdio-gpio0 = &mdio0;
15 		mdio-gpio1 = &mdio1;
20 		stdout-path = "serial0:115200n8";
23 	gpio-keys {
24 		compatible = "gpio-keys";
25 		pinctrl-0 = <&buttons_pins>;
26 		pinctrl-names = "default";
32 			linux,input-type = <1>;
33 			debounce-interval = <60>;
37 	leds {
38 		compatible = "gpio-leds";
39 		pinctrl-0 = <&leds_pins>;
40 		pinctrl-names = "default";
42 		led-0 {
46 			default-state = "off";
55 	mdio0: mdio-0 {
57 		compatible = "virtual,mdio-gpio";
60 		#address-cells = <1>;
61 		#size-cells = <0>;
63 		pinctrl-0 = <&mdio0_pins>;
64 		pinctrl-names = "default";
71 			pinctrl-0 = <&sw0_reset_pin>;
72 			pinctrl-names = "default";
74 			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
78 				#address-cells = <1>;
79 				#size-cells = <0>;
85 					phy-mode = "rgmii-id";
86 					fixed-link {
88 						full-duplex;
96 					leds {
97 						#address-cells = <1>;
98 						#size-cells = <0>;
104 							default-state = "keep";
113 					leds {
114 						#address-cells = <1>;
115 						#size-cells = <0>;
121 							default-state = "keep";
130 					leds {
131 						#address-cells = <1>;
132 						#size-cells = <0>;
138 							default-state = "keep";
147 					leds {
148 						#address-cells = <1>;
149 						#size-cells = <0>;
155 							default-state = "keep";
164 					leds {
165 						#address-cells = <1>;
166 						#size-cells = <0>;
172 							default-state = "keep";
180 	mdio1: mdio-1 {
182 		compatible = "virtual,mdio-gpio";
185 		#address-cells = <1>;
186 		#size-cells = <0>;
188 		pinctrl-0 = <&mdio1_pins>;
189 		pinctrl-names = "default";
196 			pinctrl-0 = <&sw1_reset_pin>;
197 			pinctrl-names = "default";
199 			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
203 				#address-cells = <1>;
204 				#size-cells = <0>;
210 					phy-mode = "sgmii";
211 					fixed-link {
213 						full-duplex;
221 					leds {
222 						#address-cells = <1>;
223 						#size-cells = <0>;
229 							default-state = "keep";
238 					leds {
239 						#address-cells = <1>;
240 						#size-cells = <0>;
246 							default-state = "keep";
255 					leds {
256 						#address-cells = <1>;
257 						#size-cells = <0>;
263 							default-state = "keep";
272 					leds {
273 						#address-cells = <1>;
274 						#size-cells = <0>;
280 							default-state = "keep";
289 					leds {
290 						#address-cells = <1>;
291 						#size-cells = <0>;
297 							default-state = "keep";
313 				pinctrl-0 = <&spi_pins>;
314 				pinctrl-names = "default";
316 				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
319 					compatible = "jedec,spi-nor";
320 					#address-cells = <1>;
321 					#size-cells = <1>;
322 					spi-max-frequency = <50000000>;
342 	phy-mode = "rgmii";
344 	phy-handle = <&switch0cpu>;
346 	fixed-link {
348 		full-duplex;
355 	phy-mode = "sgmii";
357 	phy-handle = <&switch1cpu>;
359 	fixed-link {
361 		full-duplex;
384 		nand-ecc-strength = <4>;
385 		nand-bus-width = <8>;
386 		nand-ecc-step-size = <512>;
389 			compatible = "fixed-partitions";
390 			#address-cells = <1>;
391 			#size-cells = <1>;
410 			drive-strength = <16>;
411 			bias-disable;
418 			drive-strength = <16>;
419 			bias-disable;
427 			drive-strength = <8>;
428 			bias-disable;
435 			drive-strength = <16>;
437 			bias-disable;
438 			input-disable;
445 			drive-strength = <16>;
447 			bias-disable;
448 			input-disable;
456 			drive-strength = <16>;
457 			bias-disable;
458 			output-high;
468 	pinctrl-0 = <&usb1_pwr_en_pins>;
469 	pinctrl-names = "default";