Lines Matching +full:tegra20 +full:- +full:ehci

1 // SPDX-License-Identifier: GPL-2.0 OR MIT
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
5 #include "tegra20-colibri.dtsi"
9 	compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
10 		     "nvidia,tegra20";
22 		stdout-path = "serial0:115200n8";
35 			hdmi-supply = <&reg_5v0>;
41 			bl-on {
49 			hotplug-detect {
85 			uart-a {
89 			uart-b {
93 			uart-c {
97 			usbh-pen {
103 	/* Colibri UART-A */
105 		/delete-property/ dmas;
106 		/delete-property/ dma-names;
110 	/* Colibri UART-C */
115 	/* Colibri UART-B */
130 		clock-frequency = <400000>;
151 		spi-max-frequency = <25000000>;
157 			interrupt-parent = <&gpio>;
160 			spi-max-frequency = <10000000>;
161 			vdd-supply = <&reg_3v3>;
162 			xceiver-supply = <&reg_5v0>;
166 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
172 	usb-phy@c5000000 {
174 		vbus-supply = <&reg_usbc_vbus>;
177 	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
182 	usb-phy@c5008000 {
184 		vbus-supply = <&reg_usbh_vbus>;
190 		bus-width = <4>;
191 		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
192 		no-1-8-v;
196 		compatible = "pwm-backlight";
197 		brightness-levels = <255 128 64 32 16 8 4 0>;
198 		default-brightness-level = <6>;
200 		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
201 		power-supply = <&reg_3v3>;
205 	clk16m: clock-osc3 {
206 		compatible = "fixed-clock";
207 		#clock-cells = <0>;
208 		clock-frequency = <16000000>;
211 	gpio-keys {
212 		compatible = "gpio-keys";
214 		key-wakeup {
218 			debounce-interval = <10>;
219 			wakeup-source;
230 		power-supply = <&reg_3v3>;
233 	reg_3v3: regulator-3v3 {
234 		compatible = "regulator-fixed";
235 		regulator-name = "3.3V_SW";
236 		regulator-min-microvolt = <3300000>;
237 		regulator-max-microvolt = <3300000>;
240 	reg_5v0: regulator-5v0 {
241 		compatible = "regulator-fixed";
242 		regulator-name = "5V_SW";
243 		regulator-min-microvolt = <5000000>;
244 		regulator-max-microvolt = <5000000>;
247 	reg_usbc_vbus: regulator-usbc-vbus {
248 		compatible = "regulator-fixed";
249 		regulator-name = "VCC_USB5";
250 		regulator-min-microvolt = <5000000>;
251 		regulator-max-microvolt = <5000000>;
252 		vin-supply = <&reg_5v0>;
256 	reg_usbh_vbus: regulator-usbh-vbus {
257 		compatible = "regulator-fixed";
258 		regulator-name = "VCC_USB[1-4]";
259 		regulator-min-microvolt = <5000000>;
260 		regulator-max-microvolt = <5000000>;
262 		vin-supply = <&reg_5v0>;