Lines Matching +full:mmc0 +full:- +full:pins
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
11 model = "Atmel AT91SAM9X5-EK";
16 stdout-path = "serial0:115200n8";
20 compatible = "atmel,sam9x5-wm8731-audio";
24 atmel,audio-routing =
30 atmel,ssc-controller = <&ssc0>;
31 atmel,audio-codec = <&wm8731>;
36 atmel,adc-ts-wires = <4>;
37 atmel,adc-ts-pressure-threshold = <10000>;
54 &mmc0 {
55 pinctrl-0 = <
59 pinctrl-names = "default";
64 bus-width = <4>;
65 cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
70 pinctrl-0 = <
74 pinctrl-names = "default";
79 bus-width = <4>;
80 cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
86 pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
87 atmel,pins =
91 pinctrl_sensor_power: sensor_power-0 {
92 atmel,pins =
96 pinctrl_sensor_reset: sensor_reset-0 {
97 atmel,pins =
102 mmc0 {
103 pinctrl_board_mmc0: mmc0-board {
104 atmel,pins =
110 pinctrl_board_mmc1: mmc1-board {
111 atmel,pins =
117 pinctrl_board_usb2: usb2-board {
118 atmel,pins =
125 cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
130 spi-max-frequency = <50000000>;
140 atmel,use-dma-rx;
141 atmel,use-dma-tx;
146 num-ports = <3>;
147 atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_board_usb2>;
161 atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;