Lines Matching +full:mmc0 +full:- +full:pins

1 // SPDX-License-Identifier: GPL-2.0-or-later
3  * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
8 /dts-v1/;
12 	model = "Atmel AT91SAM9N12-EK";
17 		stdout-path = "serial0:115200n8";
26 			clock-frequency = <32768>;
30 			clock-frequency = <16000000>;
46 					compatible = "atmel,tcb-timer";
51 					compatible = "atmel,tcb-timer";
63 					clock-names = "mclk";
69 					interrupt-parent = <&pioA>;
71 					pinctrl-names = "default";
72 					pinctrl-0 = <&pinctrl_qt1070_irq>;
76 			mmc0: mmc@f0008000 {  label
77 				pinctrl-0 = <
84 					bus-width = <4>;
85 					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
90 				mmc0 {
91 					pinctrl_board_mmc0: mmc0-board {
92 						atmel,pins =
99 						atmel,pins =
106 						atmel,pins =
113 						atmel,pins =
121 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
124 					spi-max-frequency = <50000000>;
132 				hlcdc-display-controller {
133 					pinctrl-names = "default";
134 					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
139 							remote-endpoint = <&panel_input>;
146 				pinctrl-names = "default";
147 				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
148 				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
164 			nand_controller: nand-controller {
166 				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
167 				pinctrl-names = "default";
171 					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
172 					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
173 					nand-bus-width = <8>;
174 					nand-ecc-mode = "soft";
175 					nand-ecc-strength = <2>;
176 					nand-ecc-step-size = <512>;
177 					nand-on-flash-bbt;
184 			num-ports = <1>;
185 			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
191 		compatible = "pwm-backlight";
193 		brightness-levels = <0 4 8 16 32 64 128 255>;
194 		default-brightness-level = <6>;
195 		power-supply = <&bl_reg>;
200 		compatible = "regulator-fixed";
201 		regulator-name = "backlight-power-supply";
202 		regulator-min-microvolt = <5000000>;
203 		regulator-max-microvolt = <5000000>;
208 		compatible = "gpio-leds";
213 			linux,default-trigger = "mmc0";
219 			linux,default-trigger = "nand-disk";
225 			linux,default-trigger = "heartbeat";
229 	gpio-keys {
230 		compatible = "gpio-keys";
232 		button-enter {
236 			wakeup-source;
241 		compatible = "qiaodian,qd43003c0-40";
243 		power-supply = <&panel_reg>;
244 		#address-cells = <1>;
245 		#size-cells = <0>;
250 			#address-cells = <1>;
251 			#size-cells = <0>;
255 				remote-endpoint = <&hlcdc_panel_output>;
261 		compatible = "regulator-fixed";
262 		regulator-name = "panel-power-supply";
263 		regulator-min-microvolt = <3300000>;
264 		regulator-max-microvolt = <3300000>;
269 		compatible = "atmel,asoc-wm8904";
270 		pinctrl-names = "default";
271 		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
274 		atmel,audio-routing =
282 		atmel,ssc-controller = <&ssc0>;
283 		atmel,audio-codec = <&wm8904>;