Lines Matching +full:usart +full:- +full:mode
1 // SPDX-License-Identifier: GPL-2.0-only
3 * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
5 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8 #include <dt-bindings/pinctrl/at91.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/clock/at91.h>
12 #include <dt-bindings/mfd/at91-usart.h>
15 #address-cells = <1>;
16 #size-cells = <1>;
19 interrupt-parent = <&aic>;
39 #address-cells = <1>;
40 #size-cells = <0>;
43 compatible = "arm,arm926ej-s";
56 compatible = "fixed-clock";
57 #clock-cells = <0>;
58 clock-frequency = <0>;
62 compatible = "fixed-clock";
63 #clock-cells = <0>;
64 clock-frequency = <0>;
69 compatible = "mmio-sram";
71 #address-cells = <1>;
72 #size-cells = <1>;
77 compatible = "mmio-sram";
79 #address-cells = <1>;
80 #size-cells = <1>;
85 compatible = "simple-bus";
86 #address-cells = <1>;
87 #size-cells = <1>;
91 compatible = "simple-bus";
92 #address-cells = <1>;
93 #size-cells = <1>;
96 aic: interrupt-controller@fffff000 {
97 #interrupt-cells = <3>;
98 compatible = "atmel,at91rm9200-aic";
99 interrupt-controller;
101 atmel,external-irqs = <30 31>;
104 pmc: clock-controller@fffffc00 {
105 compatible = "atmel,at91sam9263-pmc", "syscon";
108 #clock-cells = <2>;
110 clock-names = "slow_xtal", "main_xtal";
114 compatible = "atmel,at91sam9260-sdramc";
119 compatible = "atmel,at91sam9260-smc", "syscon";
124 compatible = "atmel,at91sam9260-sdramc";
129 compatible = "atmel,at91sam9260-smc", "syscon";
134 compatible = "atmel,at91sam9263-matrix", "syscon";
139 compatible = "atmel,at91sam9260-pit";
146 compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
147 #address-cells = <1>;
148 #size-cells = <0>;
152 clock-names = "t0_clk", "slow_clk";
155 reset-controller@fffffd00 {
156 compatible = "atmel,at91sam9260-rstc";
162 compatible = "atmel,at91sam9260-shdwc";
168 #address-cells = <1>;
169 #size-cells = <1>;
170 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
173 atmel,mux-mask = <
184 pinctrl_dbgu: dbgu-0 {
192 pinctrl_usart0: usart0-0 {
198 pinctrl_usart0_rts: usart0_rts-0 {
203 pinctrl_usart0_cts: usart0_cts-0 {
210 pinctrl_usart1: usart1-0 {
216 pinctrl_usart1_rts: usart1_rts-0 {
221 pinctrl_usart1_cts: usart1_cts-0 {
228 pinctrl_usart2: usart2-0 {
234 pinctrl_usart2_rts: usart2_rts-0 {
239 pinctrl_usart2_cts: usart2_cts-0 {
246 pinctrl_nand_rb: nand-rb-0 {
251 pinctrl_nand_cs: nand-cs-0 {
258 pinctrl_macb_rmii: macb_rmii-0 {
272 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
286 pinctrl_mmc0_clk: mmc0_clk-0 {
291 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
297 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
304 pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
310 pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
319 pinctrl_mmc1_clk: mmc1_clk-0 {
324 pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
330 pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
337 pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
343 pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
352 pinctrl_ssc0_tx: ssc0_tx-0 {
359 pinctrl_ssc0_rx: ssc0_rx-0 {
368 pinctrl_ssc1_tx: ssc1_tx-0 {
375 pinctrl_ssc1_rx: ssc1_rx-0 {
384 pinctrl_spi0: spi0-0 {
393 pinctrl_spi1: spi1-0 {
402 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
406 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
410 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
414 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
418 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
422 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
426 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
430 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
434 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
440 pinctrl_fb: fb-0 {
476 pinctrl_ac97: ac97-0 {
486 compatible = "atmel,at91rm9200-gpio";
489 #gpio-cells = <2>;
490 gpio-controller;
491 interrupt-controller;
492 #interrupt-cells = <2>;
497 compatible = "atmel,at91rm9200-gpio";
500 #gpio-cells = <2>;
501 gpio-controller;
502 interrupt-controller;
503 #interrupt-cells = <2>;
508 compatible = "atmel,at91rm9200-gpio";
511 #gpio-cells = <2>;
512 gpio-controller;
513 interrupt-controller;
514 #interrupt-cells = <2>;
519 compatible = "atmel,at91rm9200-gpio";
522 #gpio-cells = <2>;
523 gpio-controller;
524 interrupt-controller;
525 #interrupt-cells = <2>;
530 compatible = "atmel,at91rm9200-gpio";
533 #gpio-cells = <2>;
534 gpio-controller;
535 interrupt-controller;
536 #interrupt-cells = <2>;
542 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
544 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
546 pinctrl-names = "default";
547 pinctrl-0 = <&pinctrl_dbgu>;
549 clock-names = "usart";
554 compatible = "atmel,at91sam9260-usart";
556 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
558 atmel,use-dma-rx;
559 atmel,use-dma-tx;
560 pinctrl-names = "default";
561 pinctrl-0 = <&pinctrl_usart0>;
563 clock-names = "usart";
568 compatible = "atmel,at91sam9260-usart";
570 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
572 atmel,use-dma-rx;
573 atmel,use-dma-tx;
574 pinctrl-names = "default";
575 pinctrl-0 = <&pinctrl_usart1>;
577 clock-names = "usart";
582 compatible = "atmel,at91sam9260-usart";
584 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
586 atmel,use-dma-rx;
587 atmel,use-dma-tx;
588 pinctrl-names = "default";
589 pinctrl-0 = <&pinctrl_usart2>;
591 clock-names = "usart";
596 compatible = "atmel,at91rm9200-ssc";
599 pinctrl-names = "default";
600 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
602 clock-names = "pclk";
607 compatible = "atmel,at91rm9200-ssc";
610 pinctrl-names = "default";
611 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
613 clock-names = "pclk";
618 compatible = "atmel,at91sam9263-ac97c";
621 pinctrl-names = "default";
622 pinctrl-0 = <&pinctrl_ac97>;
624 clock-names = "ac97_clk";
629 compatible = "cdns,at91sam9260-macb", "cdns,macb";
632 pinctrl-names = "default";
633 pinctrl-0 = <&pinctrl_macb_rmii>;
635 clock-names = "hclk", "pclk";
640 compatible = "atmel,at91sam9263-udc";
644 clock-names = "pclk", "hclk";
649 compatible = "atmel,at91sam9260-i2c";
652 #address-cells = <1>;
653 #size-cells = <0>;
662 #address-cells = <1>;
663 #size-cells = <0>;
665 clock-names = "mci_clk";
673 #address-cells = <1>;
674 #size-cells = <0>;
676 clock-names = "mci_clk";
681 compatible = "atmel,at91sam9260-wdt";
685 atmel,watchdog-type = "hardware";
686 atmel,reset-type = "all";
687 atmel,dbg-halt;
692 #address-cells = <1>;
693 #size-cells = <0>;
694 compatible = "atmel,at91rm9200-spi";
697 pinctrl-names = "default";
698 pinctrl-0 = <&pinctrl_spi0>;
700 clock-names = "spi_clk";
705 #address-cells = <1>;
706 #size-cells = <0>;
707 compatible = "atmel,at91rm9200-spi";
710 pinctrl-names = "default";
711 pinctrl-0 = <&pinctrl_spi1>;
713 clock-names = "spi_clk";
718 compatible = "atmel,at91sam9rl-pwm";
721 #pwm-cells = <3>;
723 clock-names = "pwm_clk";
728 compatible = "atmel,at91sam9263-can";
731 pinctrl-names = "default";
732 pinctrl-0 = <&pinctrl_can_rx_tx>;
734 clock-names = "can_clk";
738 compatible = "atmel,at91sam9260-rtt";
746 compatible = "atmel,at91sam9260-rtt";
754 compatible = "atmel,at91sam9260-gpbr", "syscon";
761 compatible = "atmel,at91sam9263-lcdc";
764 pinctrl-names = "default";
765 pinctrl-0 = <&pinctrl_fb>;
767 clock-names = "lcdc_clk", "hclk";
772 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
776 clock-names = "ohci_clk", "hclk", "uhpck";
781 compatible = "atmel,at91sam9263-ebi0";
782 #address-cells = <2>;
783 #size-cells = <1>;
796 nand_controller0: nand-controller {
797 compatible = "atmel,at91sam9260-nand-controller";
798 #address-cells = <2>;
799 #size-cells = <1>;
806 compatible = "atmel,at91sam9263-ebi1";
807 #address-cells = <2>;
808 #size-cells = <1>;
817 nand_controller1: nand-controller {
818 compatible = "atmel,at91sam9260-nand-controller";
819 #address-cells = <2>;
820 #size-cells = <1>;
827 i2c-gpio-0 {
828 compatible = "i2c-gpio";
832 i2c-gpio,sda-open-drain;
833 i2c-gpio,scl-open-drain;
834 i2c-gpio,delay-us = <2>; /* ~100 kHz */
835 #address-cells = <1>;
836 #size-cells = <0>;