Lines Matching +full:gain +full:- +full:gpios

1 // SPDX-License-Identifier: GPL-2.0+
3  * at91-natte.dts - Device Tree include file for the Natte board
11 	mux: mux-controller {
12 		compatible = "gpio-mux";
13 		#mux-control-cells = <0>;
15 		mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
20 	batntc-mux {
21 		compatible = "io-channel-mux";
22 		io-channels = <&adc 5>;
23 		io-channel-names = "parent";
24 		mux-controls = <&mux>;
31 	batv-mux {
32 		compatible = "io-channel-mux";
33 		io-channels = <&adc 6>;
34 		io-channel-names = "parent";
35 		mux-controls = <&mux>;
42 	iout-mux {
43 		compatible = "io-channel-mux";
44 		io-channels = <&adc 7>;
45 		io-channel-names = "parent";
46 		mux-controls = <&mux>;
53 	i2c-mux {
54 		compatible = "i2c-mux";
55 		mux-locked;
56 		i2c-parent = <&i2c0>;
57 		mux-controls = <&mux>;
59 		#address-cells = <1>;
60 		#size-cells = <0>;
64 			#address-cells = <1>;
65 			#size-cells = <0>;
71 				ti,charge-current = <2000>;
72 				ti,charge-voltage = <16800>;
74 				poll-interval = <20000>;
80 			#address-cells = <1>;
81 			#size-cells = <0>;
87 				ti,charge-current = <2000>;
88 				ti,charge-voltage = <16800>;
90 				poll-interval = <20000>;
96 			#address-cells = <1>;
97 			#size-cells = <0>;
103 				ti,charge-current = <2000>;
104 				ti,charge-voltage = <16800>;
106 				poll-interval = <20000>;
112 			#address-cells = <1>;
113 			#size-cells = <0>;
119 				ti,charge-current = <2000>;
120 				ti,charge-voltage = <16800>;
122 				poll-interval = <20000>;
128 			#address-cells = <1>;
129 			#size-cells = <0>;
135 				ti,charge-current = <2000>;
136 				ti,charge-voltage = <16800>;
138 				poll-interval = <20000>;
144 			#address-cells = <1>;
145 			#size-cells = <0>;
151 				ti,charge-current = <2000>;
152 				ti,charge-voltage = <16800>;
154 				poll-interval = <20000>;
160 			#address-cells = <1>;
161 			#size-cells = <0>;
167 				ti,charge-current = <2000>;
168 				ti,charge-voltage = <16800>;
170 				poll-interval = <20000>;
176 			#address-cells = <1>;
177 			#size-cells = <0>;
183 				ti,charge-current = <2000>;
184 				ti,charge-voltage = <16800>;
186 				poll-interval = <20000>;
196 		#gpio-cells = <2>;
200 		gpio-controller;
203 		pinctrl-names = "default";
204 		pinctrl-0 = <&gpio3_cfg_pins>;
208 			bias-pull-up;
215 		#io-channel-cells = <1>;
217 		#address-cells = <1>;
218 		#size-cells = <0>;
222 			ti,gain = <2>;
228 			ti,gain = <2>;
234 			ti,gain = <1>;
240 			ti,gain = <3>;