Lines Matching +full:pinmux +full:- +full:id

1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
14 	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
22 		compatible = "mediatek,mt2701-cs42448-machine";
25 		audio-routing =
42 		mediatek,audio-codec = <&cs42448>;
43 		mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
44 		pinctrl-names = "default";
45 		pinctrl-0 = <&aud_pins_default>;
46 		i2s1-in-sel-gpio1 = <&pio 53 0>;
47 		i2s1-in-sel-gpio2 = <&pio 54 0>;
52 		compatible = "linux,bt-sco";
56 		compatible = "pwm-backlight";
58 		brightness-levels = <
63 		default-brightness-level = <9>;
67 		compatible = "regulator-fixed";
68 		regulator-name = "usb_vbus";
69 		regulator-min-microvolt = <5000000>;
70 		regulator-max-microvolt = <5000000>;
72 		enable-active-high;
82 	pinctrl-names = "default";
83 	pinctrl-0 = <&pwm_bls_gpio>;
87 	pinctrl-names = "default";
88 	pinctrl-0 = <&i2c0_pins_a>;
93 	pinctrl-names = "default";
94 	pinctrl-0 = <&i2c1_pins_a>;
99 	pinctrl-names = "default";
100 	pinctrl-0 = <&i2c2_pins_a>;
106 		clock-names = "mclk";
113 			pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
115 			bias-disable;
121 			pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
123 			bias-disable;
129 			pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
131 			bias-disable;
137 			pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
143 			pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
147 			bias-disable;
153 			pinmux = <MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA>,
171 			drive-strength = <MTK_DRIVE_12mA>;
172 			bias-pull-down;
178 			pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>,
182 			bias-disable;
188 			pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>,
192 			bias-disable;
198 	pinctrl-names = "default";
199 	pinctrl-0 = <&spi_pins_a>;
204 	pinctrl-names = "default";
205 	pinctrl-0 = <&spi_pins_b>;
210 	pinctrl-names = "default";
211 	pinctrl-0 = <&spi_pins_c>;
216 	pinctrl-names = "default";
217 	pinctrl-0 = <&nor_pins_default>;
220 		compatible = "jedec,spi-nor";
228 			pinmux = <MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS>,
234 			drive-strength = <MTK_DRIVE_4mA>;
235 			bias-pull-up;
246 	usb-role-switch;
248 		compatible = "gpio-usb-b-connector", "usb-b-connector";
250 		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
251 		vbus-supply = <&usb_vbus>;