Lines Matching +full:0 +full:xf4000000
20 reg = <0x00000000 0x2000000>; /* 32 MB */
28 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
29 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
30 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
35 pinctrl-0 = <&pmx_reset_button>;
47 pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
50 led@0 {
52 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
72 flash@0 {
74 reg = <0 0x800000>;
82 partition@0 {
84 reg = <0x0 0x100000>;
89 reg = <0x100000 0x660000>;
94 reg = <0x760000 0x20000>;
99 reg = <0x780000 0x80000>;
109 switch: switch@0 {
112 #size-cells = <0>;
113 reg = <0>;
114 dsa,member = <0 0>;
118 #size-cells = <0>;
120 port@0 {
121 reg = <0>;
163 #size-cells = <0>;
165 lan3phy: ethernet-phy@0 {
167 compatible = "ethernet-phy-id0141.0cb0",
169 reg = <0>;
170 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
175 compatible = "ethernet-phy-id0141.0cb0",
178 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
183 compatible = "ethernet-phy-id0141.0cb0",
186 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
191 compatible = "ethernet-phy-id0141.0cb0",
194 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
199 compatible = "ethernet-phy-id0141.0cb0",
202 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
211 ethernet-port@0 {
220 pinctrl-0 = <&pmx_pci_gpios>;