Lines Matching +full:connect +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
20 compatible = "gpio-leds";
21 pinctrl-0 = <&pmx_gpio_18>;
22 pinctrl-names = "default";
24 led-power {
26 gpios = <&gpio0 18 1>;
27 default-state = "keep";
31 usb_power: regulator-1 {
32 compatible = "regulator-fixed";
33 regulator-name = "USB Power";
34 regulator-min-microvolt = <5000000>;
35 regulator-max-microvolt = <5000000>;
36 enable-active-high;
37 regulator-always-on;
38 regulator-boot-on;
40 pinctrl-0 = <&pmx_gpio_1>;
41 pinctrl-names = "default";
47 compatible = "fixed-clock";
48 #clock-cells = <0>;
49 clock-frequency = <25000000>;
53 ir_recv: ir-receiver {
54 compatible = "gpio-ir-receiver";
55 gpios = <&gpio0 19 1>;
56 pinctrl-0 = <&pmx_gpio_19>;
57 pinctrl-names = "default";
60 gpu-subsystem {
70 ethernet-port@0 {
71 phy-handle = <ðphy>;
76 ethphy: ethernet-phy@1 {
88 clock-frequency = <100000>;
90 si5351: clock-generator@60 {
91 compatible = "silabs,si5351a-msop";
93 #address-cells = <1>;
94 #size-cells = <0>;
95 #clock-cells = <1>;
97 /* connect xtal input to 25MHz reference */
99 clock-names = "xtal";
101 /* connect xtal input as source of pll0 and pll1 */
102 silabs,pll-source = <0 0>, <1 0>;
106 silabs,drive-strength = <8>;
107 silabs,multisynth-source = <0>;
108 silabs,clock-source = <0>;
109 silabs,pll-master;
114 silabs,drive-strength = <8>;
115 silabs,multisynth-source = <1>;
116 silabs,clock-source = <0>;
117 silabs,pll-master;
132 spi-max-frequency = <20000000>;
140 clock-names = "internal", "extclk";
141 pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
142 pinctrl-names = "default";