Lines Matching +full:phy +full:- +full:sata3

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/gpio/gpio.h>
12 #include "armada-xp-mv78230.dtsi"
16 …compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,arm…
19 		stdout-path = "serial0:115200n8";
33 		internal-regs {
41 				clock-frequency = <400000>;
45 				 * MGT4012XB-O20, 8000RPM) near eSATA port */
84 					wakeup-source;
98 				pinctrl-0 = <&ge0_rgmii_pins>;
99 				pinctrl-names = "default";
102 				phy = <&phy0>;
103 				phy-mode = "rgmii-id";
107 				pinctrl-0 = <&ge1_rgmii_pins>;
108 				pinctrl-names = "default";
111 				phy = <&phy1>;
112 				phy-mode = "rgmii-id";
117 				nr-ports = <2>;
124 		g762_clk: g762-oscillator {
125 			compatible = "fixed-clock";
126 			#clock-cells = <0>;
127 			clock-frequency = <32768>;
131 	gpio-leds {
132 		compatible = "gpio-leds";
133 		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
135 		pinctrl-names = "default";
137 		red-sata1-led {
140 			default-state = "off";
143 		red-sata2-led {
146 			default-state = "off";
149 		red-sata3-led {
150 			label = "rn2120:red:sata3";
152 			default-state = "off";
155 		red-sata4-led {
158 			default-state = "off";
161 		red-err-led {
164 			default-state = "off";
168 	gpio-keys {
169 		compatible = "gpio-keys";
170 		pinctrl-0 = <&power_button_pin &reset_button_pin>;
171 		pinctrl-names = "default";
173 		power-button {
179 		reset-button {
186 	gpio-poweroff {
187 		compatible = "gpio-poweroff";
188 		pinctrl-0 = <&poweroff>;
189 		pinctrl-names = "default";
217 	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
221 	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
233 	power_button_pin: power-button-pin {
238 	reset_button_pin: reset-button-pin {
243 	sata1_led_pin: sata1-led-pin {
248 	sata2_led_pin: sata2-led-pin {
253 	sata3_led_pin: sata3-led-pin {
258 	sata4_led_pin: sata4-led-pin {
263 	sata1_power_pin: sata1-power-pin {
268 	sata2_power_pin: sata2-power-pin {
273 	sata3_power_pin: sata3-power-pin {
278 	sata4_power_pin: sata4-power-pin {
283 	sata1_pres_pin: sata1-pres-pin {
288 	sata2_pres_pin: sata2-pres-pin {
293 	sata3_pres_pin: sata3-pres-pin {
298 	sata4_pres_pin: sata4-pres-pin {
303 	err_led_pin: err-led-pin {
314 		label = "pxa3xx_nand-0";
315 		nand-rb = <0>;
316 		marvell,nand-keep-config;
317 		nand-on-flash-bbt;
320 		nand-ecc-strength = <4>;
321 		nand-ecc-step-size = <512>;
324 			compatible = "fixed-partitions";
325 			#address-cells = <1>;
326 			#size-cells = <1>;
329 				label = "u-boot";
331 				read-only;
335 				label = "u-boot-env";
337 				read-only;