Lines Matching +full:label +full:- +full:revision
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
3 * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
8 /dts-v1/;
9 #include "armada-388-clearfog.dtsi"
13 compatible = "solidrun,clearfog-a1", "marvell,armada388",
17 internal-regs {
27 reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
33 gpio-keys {
34 compatible = "gpio-keys";
35 pinctrl-0 = <&rear_button_pins>;
36 pinctrl-names = "default";
38 button-0 {
40 label = "Rear Button";
42 linux,can-disable;
50 phy-mode = "1000base-x";
52 fixed-link {
54 full-duplex;
61 * 0-CON3 CLKREQ#
62 * 1-CON3 PERST#
63 * 2-CON2 PERST#
64 * 3-CON3 W_DISABLE
65 * 4-CON2 CLKREQ#
66 * 5-USB3 overcurrent
67 * 6-USB3 power
68 * 7-CON2 W_DISABLE
69 * 8-JP4 P1
70 * 9-JP4 P4
71 * 10-JP4 P5
72 * 11-m.2 DEVSLP
73 * 12-SFP_LOS
74 * 13-SFP_TX_FAULT
75 * 14-SFP_TX_DISABLE
76 * 15-SFP_MOD_DEF0
78 pcie2-0-clkreq-hog {
79 gpio-hog;
82 line-name = "pcie2.0-clkreq";
84 pcie2-0-w-disable-hog {
85 gpio-hog;
87 output-low;
88 line-name = "pcie2.0-w-disable";
95 ethernet-switch@4 {
98 pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
99 pinctrl-names = "default";
101 ethernet-ports {
102 #address-cells = <1>;
103 #size-cells = <0>;
105 ethernet-port@0 {
107 label = "lan5";
110 ethernet-port@1 {
112 label = "lan4";
115 ethernet-port@2 {
117 label = "lan3";
120 ethernet-port@3 {
122 label = "lan2";
125 ethernet-port@4 {
127 label = "lan1";
130 ethernet-port@5 {
133 phy-mode = "1000base-x";
135 fixed-link {
137 full-duplex;
141 ethernet-port@6 {
144 label = "lan6";
145 phy-mode = "rgmii-id";
147 fixed-link {
149 full-duplex;
157 clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
161 clearfog_dsa0_pins: clearfog-dsa0-pins {
165 clearfog_spi1_cs_pins: spi1-cs-pins {
169 rear_button_pins: rear-button-pins {
182 pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;