Lines Matching +full:rb +full:- +full:gpios
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include "armada-370.dtsi"
14 compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
17 stdout-path = "serial0:115200n8";
30 internal-regs {
35 clock-frequency = <600000000>;
40 compatible = "gpio-leds";
41 pinctrl-names = "default";
42 pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
46 gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
47 default-state = "keep";
52 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
53 default-state = "off";
58 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
59 default-state = "off";
64 pinctrl-0 = <&ge0_rgmii_pins>;
65 pinctrl-names = "default";
68 phy-mode = "rgmii-id";
71 pinctrl-0 = <&ge1_rgmii_pins>;
72 pinctrl-names = "default";
75 phy-mode = "rgmii-id";
83 pinctrl-0 = <&sdio_pins3>;
84 pinctrl-names = "default";
87 * No CD or WP GPIOs: SDIO interface used for
90 broken-cd;
103 clock-frequency = <100000>;
106 gpio-controller;
107 #gpio-cells = <2>;
118 /* Internal mini-PCIe connector */
132 pinctrl-0 = <&mdio_pins>;
133 pinctrl-names = "default";
134 phy0: ethernet-phy@0 {
138 phy1: ethernet-phy@1 {
144 pwr_led_pin: pwr-led-pin {
149 stat_led_pins: stat-led-pins {
160 label = "pxa3xx_nand-0";
161 nand-rb = <0>;
162 marvell,nand-keep-config;
163 nand-on-flash-bbt;
166 compatible = "fixed-partitions";
167 #address-cells = <1>;
168 #size-cells = <1>;
171 label = "U-Boot";