Lines Matching +full:miso +full:- +full:pins

1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
14 	#address-cells = <1>;
15 	#size-cells = <1>;
24 		stdout-path = &uart0;
28 		compatible = "gpio-keys";
30 		button-setup {
31 			debounce-interval = <100>;
32 			wakeup-source;
41 		compatible = "gpio-leds";
42 		led-green-info {
45 			default-state = "on";
46 			linux,default-trigger = "heartbeat";
48 		led-green-usb {
51 			default-state = "off";
52 			linux,default-trigger = "usb-host";
57 		compatible = "virtual,mdio-gpio";
61 		#address-cells = <1>;
62 		#size-cells = <0>;
65 		phy0: ethernet-phy@1 {
71 		compatible = "spi-gpio";
72 		#address-cells = <1>;
73 		#size-cells = <0>;
75 		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
76 		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
77 		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
78 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
79 		num-chipselects = <1>;
85 			spi-max-frequency = <2500000>;
86 			gpio-controller;
87 			#gpio-cells = <2>;
90 				#address-cells = <1>;
91 				#size-cells = <0>;
113 					phy-mode = "rgmii";
114 					fixed-link {
116 						full-duplex;
128 			pinctrl-names = "enabled", "disabled";
129 			pinctrl-0 = <&pflash_default_pins>;
130 			pinctrl-1 = <&pflash_disabled_pins>;
135 				compatible = "redboot-fis";
137 				fis-index-block = <0x1fc>;
149 				gpio0_default_pins: pinctrl-gpio0 {
160 				gpio1_default_pins: pinctrl-gpio1 {
168 				 * of the flash pins when the flash is not in
171 				pflash_disabled_pins: pinctrl-pflash-disabled {
178 				pinctrl-gmii {
185 						pins = "V8 GMAC0 RXDV";
186 						skew-delay = <0>;
189 						pins = "Y7 GMAC0 RXC";
190 						skew-delay = <15>;
193 						pins = "T8 GMAC0 TXEN";
194 						skew-delay = <7>;
197 						pins = "U8 GMAC0 TXC";
198 						skew-delay = <10>;
201 						pins = "T10 GMAC1 RXDV";
202 						skew-delay = <7>;
205 						pins = "Y11 GMAC1 RXC";
206 						skew-delay = <8>;
209 						pins = "W11 GMAC1 TXEN";
210 						skew-delay = <7>;
213 						pins = "V11 GMAC1 TXC";
214 						skew-delay = <5>;
218 						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
226 						skew-delay = <7>;
231 						drive-strength = <16>;
238 			cortina,gemini-ata-muxmode = <0>;
239 			cortina,gemini-enable-sata-bridge;
244 			pinctrl-names = "default";
245 			pinctrl-0 = <&gpio0_default_pins>;
249 			pinctrl-names = "default";
250 			pinctrl-0 = <&gpio1_default_pins>;
260 			ethernet-port@0 {
261 				phy-mode = "rgmii";
262 				phy-handle = <&phy0>;
264 			ethernet-port@1 {
265 				phy-mode = "rgmii";
266 				fixed-link {
268 					full-duplex;