Lines Matching +full:disable +full:- +full:dc

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * Common peripherals and configurations for MangoPi MQ-R boards.
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/leds/common.h>
16 stdout-path = "serial3:115200n8";
20 compatible = "gpio-leds";
22 led-0 {
29 /* board wide 5V supply directly from the USB-C socket */
30 reg_vcc5v: regulator-5v {
31 compatible = "regulator-fixed";
32 regulator-name = "vcc-5v";
33 regulator-min-microvolt = <5000000>;
34 regulator-max-microvolt = <5000000>;
35 regulator-always-on;
38 /* SY8008 DC/DC regulator on the board */
39 reg_3v3: regulator-3v3 {
40 compatible = "regulator-fixed";
41 regulator-name = "vcc-3v3";
42 regulator-min-microvolt = <3300000>;
43 regulator-max-microvolt = <3300000>;
44 vin-supply = <&reg_vcc5v>;
47 /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
48 reg_vcc_core: regulator-core {
49 compatible = "regulator-fixed";
50 regulator-name = "vcc-core";
51 regulator-min-microvolt = <880000>;
52 regulator-max-microvolt = <880000>;
53 vin-supply = <&reg_vcc5v>;
57 reg_avdd2v8: regulator-avdd {
58 compatible = "regulator-fixed";
59 regulator-name = "avdd2v8";
60 regulator-min-microvolt = <2800000>;
61 regulator-max-microvolt = <2800000>;
62 vin-supply = <&reg_3v3>;
65 wifi_pwrseq: wifi-pwrseq {
66 compatible = "mmc-pwrseq-simple";
67 reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
72 clock-frequency = <24000000>;
80 pinctrl-0 = <&mmc0_pins>;
81 pinctrl-names = "default";
82 vmmc-supply = <&reg_3v3>;
83 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
84 disable-wp;
85 bus-width = <4>;
90 pinctrl-0 = <&mmc1_pins>;
91 pinctrl-names = "default";
92 vmmc-supply = <&reg_3v3>;
93 non-removable;
94 bus-width = <4>;
95 mmc-pwrseq = <&wifi_pwrseq>;
104 vcc-pb-supply = <&reg_3v3>;
105 vcc-pd-supply = <&reg_3v3>;
106 vcc-pe-supply = <&reg_avdd2v8>;
107 vcc-pf-supply = <&reg_3v3>;
108 vcc-pg-supply = <&reg_3v3>;
112 pinctrl-names = "default";
113 pinctrl-0 = <&uart3_pb_pins>;
117 /* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
124 usb1_vbus-supply = <&reg_vcc5v>;