Lines Matching +full:netron +full:- +full:dy
2 * Copyright 2015 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun8i-a33.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/input/input.h>
54 compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
61 stdout-path = "serial0:115200n8";
65 compatible = "netron-dy,e231732";
66 power-supply = <®_vcc3v3>;
70 remote-endpoint = <&tcon0_out_panel>;
81 cpu-supply = <®_dcdc3>;
85 opp-1104000000 {
86 opp-hz = /bits/ 64 <1104000000>;
87 opp-microvolt = <1320000>;
88 clock-latency-ns = <244144>; /* 8 32k periods */
91 opp-1200000000 {
92 opp-hz = /bits/ 64 <1200000000>;
93 opp-microvolt = <1320000>;
94 clock-latency-ns = <244144>; /* 8 32k periods */
111 vref-supply = <®_dcdc1>;
114 button-200 {
121 button-400 {
128 button-600 {
137 vmmc-supply = <®_dcdc1>;
138 bus-width = <4>;
139 cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
144 pinctrl-names = "default";
145 pinctrl-0 = <&mmc2_8bit_pins>;
146 vmmc-supply = <®_dcdc1>;
147 bus-width = <8>;
148 non-removable;
149 cap-mmc-hw-reset;
155 drive-strength = <40>;
166 compatible = "x-powers,axp223";
168 interrupt-parent = <&r_intc>;
170 eldoin-supply = <®_dcdc1>;
185 regulator-always-on;
186 regulator-min-microvolt = <3000000>;
187 regulator-max-microvolt = <3000000>;
188 regulator-name = "vcc-io";
192 regulator-always-on;
193 regulator-min-microvolt = <2350000>;
194 regulator-max-microvolt = <2650000>;
195 regulator-name = "vdd-dll";
199 regulator-always-on;
200 regulator-min-microvolt = <2700000>;
201 regulator-max-microvolt = <3300000>;
202 regulator-name = "vcc-pll-avcc";
206 regulator-always-on;
207 regulator-min-microvolt = <900000>;
208 regulator-max-microvolt = <1400000>;
209 regulator-name = "vdd-cpus";
213 regulator-always-on;
214 regulator-min-microvolt = <3000000>;
215 regulator-max-microvolt = <3000000>;
216 regulator-name = "vcc-3v0";
220 regulator-always-on;
221 regulator-min-microvolt = <900000>;
222 regulator-max-microvolt = <1400000>;
223 regulator-name = "vdd-sys";
227 regulator-always-on;
228 regulator-min-microvolt = <900000>;
229 regulator-max-microvolt = <1400000>;
230 regulator-name = "vdd-cpu";
234 regulator-always-on;
235 regulator-min-microvolt = <1500000>;
236 regulator-max-microvolt = <1500000>;
237 regulator-name = "vcc-dram";
241 regulator-name = "vcc-rtc";
249 pinctrl-names = "default";
250 pinctrl-0 = <&lcd_rgb666_pins>;
257 remote-endpoint = <&panel_input>;
262 pinctrl-names = "default";
263 pinctrl-0 = <&uart0_pb_pins>;
274 usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */