Lines Matching +full:connect +full:- +full:gpios
1 SMSC USB3503 High-Speed Hub Controller
4 - compatible: Should be "smsc,usb3503" or "smsc,usb3503a".
7 - reg: Specifies the i2c slave address, it is required and should be 0x08
9 - connect-gpios: Should specify GPIO for connect.
10 - disabled-ports: Should specify the ports unused.
14 - intn-gpios: Should specify GPIO for interrupt.
15 - reset-gpios: Should specify GPIO for reset.
16 - initial-mode: Should specify initial mode.
18 - refclk: Clock used for driving REFCLK signal (optional, if not provided
22 clock-names in order to assign it
23 - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL
32 connect-gpios = <&gpx3 0 1>;
33 disabled-ports = <2 3>;
34 intn-gpios = <&gpx3 4 1>;
35 reset-gpios = <&gpx3 5 1>;
36 initial-mode = <1>;
38 clock-names = "refclk";